[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <87edd4twzu.fsf@all.your.base.are.belong.to.us>
Date: Thu, 22 Feb 2024 15:05:41 +0100
From: Björn Töpel <bjorn@...nel.org>
To: Anup Patel <anup@...infault.org>
Cc: Anup Patel <apatel@...tanamicro.com>, Palmer Dabbelt
<palmer@...belt.com>, Paul Walmsley <paul.walmsley@...ive.com>, Thomas
Gleixner <tglx@...utronix.de>, Rob Herring <robh+dt@...nel.org>, Krzysztof
Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Frank Rowand
<frowand.list@...il.com>, Conor Dooley <conor+dt@...nel.org>,
devicetree@...r.kernel.org, Saravana Kannan <saravanak@...gle.com>, Marc
Zyngier <maz@...nel.org>, linux-kernel@...r.kernel.org, Atish Patra
<atishp@...shpatra.org>, linux-riscv@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, Andrew Jones
<ajones@...tanamicro.com>
Subject: Re: [PATCH v14 13/18] irqchip/riscv-imsic: Add device MSI domain
support for PCI devices
Anup Patel <anup@...infault.org> writes:
> On Thu, Feb 22, 2024 at 6:44 PM Björn Töpel <bjorn@...nel.org> wrote:
>>
>> Anup Patel <apatel@...tanamicro.com> writes:
>>
>> > The Linux PCI framework supports per-device MSI domains for PCI devices
>> > so extend the IMSIC driver to allow PCI per-device MSI domains.
>> >
>> > Signed-off-by: Anup Patel <apatel@...tanamicro.com>
>> > ---
>> > drivers/irqchip/Kconfig | 7 +++++
>> > drivers/irqchip/irq-riscv-imsic-platform.c | 35 ++++++++++++++++++++--
>> > 2 files changed, 40 insertions(+), 2 deletions(-)
>> >
>> > diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
>> > index 85f86e31c996..2fc0cb32341a 100644
>> > --- a/drivers/irqchip/Kconfig
>> > +++ b/drivers/irqchip/Kconfig
>> > @@ -553,6 +553,13 @@ config RISCV_IMSIC
>> > select GENERIC_IRQ_MATRIX_ALLOCATOR
>> > select GENERIC_MSI_IRQ
>> >
>> > +config RISCV_IMSIC_PCI
>> > + bool
>> > + depends on RISCV_IMSIC
>> > + depends on PCI
>> > + depends on PCI_MSI
>> > + default RISCV_IMSIC
>> > +
>> > config EXYNOS_IRQ_COMBINER
>> > bool "Samsung Exynos IRQ combiner support" if COMPILE_TEST
>> > depends on (ARCH_EXYNOS && ARM) || COMPILE_TEST
>> > diff --git a/drivers/irqchip/irq-riscv-imsic-platform.c b/drivers/irqchip/irq-riscv-imsic-platform.c
>> > index e2344fc08dca..90ddcdd0bba5 100644
>> > --- a/drivers/irqchip/irq-riscv-imsic-platform.c
>> > +++ b/drivers/irqchip/irq-riscv-imsic-platform.c
>> > @@ -14,6 +14,7 @@
>> > #include <linux/irqdomain.h>
>> > #include <linux/module.h>
>> > #include <linux/msi.h>
>> > +#include <linux/pci.h>
>> > #include <linux/platform_device.h>
>> > #include <linux/spinlock.h>
>> > #include <linux/smp.h>
>> > @@ -208,6 +209,28 @@ static const struct irq_domain_ops imsic_base_domain_ops = {
>> > #endif
>> > };
>> >
>> > +#ifdef CONFIG_RISCV_IMSIC_PCI
>> > +
>> > +static void imsic_pci_mask_irq(struct irq_data *d)
>> > +{
>> > + pci_msi_mask_irq(d);
>> > + irq_chip_mask_parent(d);
>> > +}
>> > +
>> > +static void imsic_pci_unmask_irq(struct irq_data *d)
>> > +{
>> > + irq_chip_unmask_parent(d);
>> > + pci_msi_unmask_irq(d);
>> > +}
>> > +
>> > +#define MATCH_PCI_MSI BIT(DOMAIN_BUS_PCI_MSI)
>> > +
>> > +#else
>> > +
>> > +#define MATCH_PCI_MSI 0
>> > +
>> > +#endif
>> > +
>> > static bool imsic_init_dev_msi_info(struct device *dev,
>> > struct irq_domain *domain,
>> > struct irq_domain *real_parent,
>> > @@ -231,6 +254,13 @@ static bool imsic_init_dev_msi_info(struct device *dev,
>> >
>> > /* Is the target supported? */
>> > switch (info->bus_token) {
>> > +#ifdef CONFIG_RISCV_IMSIC_PCI
>> > + case DOMAIN_BUS_PCI_DEVICE_MSI:
>> > + case DOMAIN_BUS_PCI_DEVICE_MSIX:
>> > + info->chip->irq_mask = imsic_pci_mask_irq;
>> > + info->chip->irq_unmask = imsic_pci_unmask_irq;
>>
>> irq_set_affinity()?
>
> It's already set by the switch-case above.
Ah, right -- the new .bus_select_token! Thank you!
Powered by blists - more mailing lists