[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240223172531.671993-1-varshini.rajendran@microchip.com>
Date: Fri, 23 Feb 2024 22:55:31 +0530
From: Varshini Rajendran <varshini.rajendran@...rochip.com>
To: <linus.walleij@...aro.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <conor+dt@...nel.org>,
<nicolas.ferre@...rochip.com>, <alexandre.belloni@...tlin.com>,
<claudiu.beznea@...on.dev>, <linux-gpio@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
CC: <varshini.rajendran@...rochip.com>, Krzysztof Kozlowski
<krzysztof.kozlowski@...aro.org>
Subject: [PATCH v4 09/39] dt-bindings: pinctrl: at91: add sam9x7
Add device tree binding for SAM9X7 pin controller.
Signed-off-by: Varshini Rajendran <varshini.rajendran@...rochip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
Changes in v4:
- Updated Acked-by tag
---
.../devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
index e8abbdad7b5d..0aa1a53012d6 100644
--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
@@ -20,6 +20,7 @@ such as pull-up, multi drive, etc.
Required properties for iomux controller:
- compatible: "atmel,at91rm9200-pinctrl" or "atmel,at91sam9x5-pinctrl"
or "atmel,sama5d3-pinctrl" or "microchip,sam9x60-pinctrl"
+ or "microchip,sam9x7-pinctrl", "microchip,sam9x60-pinctrl"
- atmel,mux-mask: array of mask (periph per bank) to describe if a pin can be
configured in this periph mode. All the periph and bank need to be describe.
@@ -120,6 +121,7 @@ Some requirements for using atmel,at91rm9200-pinctrl binding:
For each bank the required properties are:
- compatible: "atmel,at91sam9x5-gpio" or "atmel,at91rm9200-gpio" or
"microchip,sam9x60-gpio"
+ or "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio"
- reg: physical base address and length of the controller's registers
- interrupts: interrupt outputs from the controller
- interrupt-controller: marks the device node as an interrupt controller
--
2.25.1
Powered by blists - more mailing lists