linux-kernel - [PATCH v6 13/13] mtd: rawnand: brcmnand: Support write protection setting from dts

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date: Thu, 22 Feb 2024 19:47:58 -0800
From: William Zhang <william.zhang@...adcom.com>
To: Linux MTD List <linux-mtd@...ts.infradead.org>,
	Linux ARM List <linux-arm-kernel@...ts.infradead.org>,
	Broadcom Kernel List <bcm-kernel-feedback-list@...adcom.com>
Cc: f.fainelli@...il.com,
	kursad.oney@...adcom.com,
	joel.peshkin@...adcom.com,
	anand.gore@...adcom.com,
	dregan@...l.com,
	kamal.dasu@...adcom.com,
	tomer.yacoby@...adcom.com,
	dan.beygelman@...adcom.com,
	William Zhang <william.zhang@...adcom.com>,
	Florian Fainelli <florian.fainelli@...adcom.com>,
	David Regan <dregan@...adcom.com>,
	Miquel Raynal <miquel.raynal@...tlin.com>,
	linux-kernel@...r.kernel.org,
	Vignesh Raghavendra <vigneshr@...com>,
	Brian Norris <computersforpeace@...il.com>,
	Richard Weinberger <richard@....at>
Subject: [PATCH v6 13/13] mtd: rawnand: brcmnand: Support write protection setting from dts

The write protection feature is controlled by the module parameter wp_on
with default set to enabled. But not all the board use this feature
especially in BCMBCA broadband board. And module parameter is not
sufficient as different board can have different option.  Add a device
tree property and allow this feature to be configured through the board
dts on per board basis.

Signed-off-by: William Zhang <william.zhang@...adcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@...adcom.com>
Reviewed-by: Kamal Dasu <kamal.dasu@...adcom.com>
Reviewed-by: David Regan <dregan@...adcom.com>

---

Changes in v6: None
Changes in v5: None
Changes in v4:
- Use the new brcm,wp-not-connected property based on the dts binding
change

Changes in v3: None
Changes in v2: None

 drivers/mtd/nand/raw/brcmnand/brcmnand.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index e8ffc283b365..4810345d0d8a 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -3223,6 +3223,10 @@ int brcmnand_probe(struct platform_device *pdev, struct brcmnand_soc *soc)
 	/* Disable XOR addressing */
 	brcmnand_rmw_reg(ctrl, BRCMNAND_CS_XOR, 0xff, 0, 0);
 
+	/* Check if the board connects the WP pin */
+	if (of_property_read_bool(dn, "brcm,wp-not-connected"))
+		wp_on = 0;
+
 	if (ctrl->features & BRCMNAND_HAS_WP) {
 		/* Permanently disable write protection */
 		if (wp_on == 2)
-- 
2.37.3