lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <693c8801-498d-42e0-bb4e-8a5bc07d9131@gmail.com>
Date: Thu, 22 Feb 2024 20:51:31 -0800
From: Florian Fainelli <f.fainelli@...il.com>
To: Oleksij Rempel <o.rempel@...gutronix.de>, Wei Fang <wei.fang@....com>,
 "David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
 Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
 Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>,
 Russell King <linux@...linux.org.uk>
Cc: kernel@...gutronix.de, linux-kernel@...r.kernel.org,
 netdev@...r.kernel.org, Shenwei Wang <shenwei.wang@....com>,
 Clark Wang <xiaoning.wang@....com>, NXP Linux Team <linux-imx@....com>
Subject: Re: [PATCH net-next v5 5/8] net: phy: Immediately call adjust_link if
 only tx_lpi_enabled changes



On 2/20/2024 10:21 PM, Oleksij Rempel wrote:
> From: Andrew Lunn <andrew@...n.ch>
> 
> The MAC driver changes its EEE hardware configuration in its
> adjust_link callback. This is called when auto-neg
> completes. Disabling EEE via eee_enabled false will trigger an
> autoneg, and as a result the adjust_link callback will be called with
> phydev->enable_tx_lpi set to false. Similarly, eee_enabled set to true
> and with a change of advertised link modes will result in a new
> autoneg, and a call the adjust_link call.
> 
> If set_eee is called with only a change to tx_lpi_enabled which does
> not trigger an auto-neg, it is necessary to call the adjust_link
> callback so that the MAC is reconfigured to take this change into
> account.
> 
> When setting phydev->enable_tx_lpi, take both eee_enabled and
> tx_lpi_enabled into account, so the MAC drivers just needs to act on
> phydev->enable_tx_lpi and not the whole EEE configuration.
> 
> Signed-off-by: Andrew Lunn <andrew@...n.ch>
> Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>

Reviewed-by: Florian Fainelli <florian.fainelli@...adcom.com>

Definitively an improvement! Minor nits below

> ---
>   drivers/net/phy/phy-c45.c | 11 ++++++++---
>   drivers/net/phy/phy.c     | 25 ++++++++++++++++++++++---
>   2 files changed, 30 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
> index c69568e7695e..217d4df59eb6 100644
> --- a/drivers/net/phy/phy-c45.c
> +++ b/drivers/net/phy/phy-c45.c
> @@ -1549,6 +1549,8 @@ EXPORT_SYMBOL(genphy_c45_ethtool_get_eee);
>    * advertised, but the previously advertised link modes are
>    * retained. This allows EEE to be enabled/disabled in a
>    * non-destructive way.
> + * Returns either error code, 0 if there was no change, or positive
> + * value if there was a change which triggered auto-neg.
>    */
>   int genphy_c45_ethtool_set_eee(struct phy_device *phydev,
>   			       struct ethtool_keee *data)
> @@ -1580,9 +1582,12 @@ int genphy_c45_ethtool_set_eee(struct phy_device *phydev,
>   	ret = genphy_c45_an_config_eee_aneg(phydev);
>   	if (ret < 0)
>   		return ret;
> -	if (ret > 0)
> -		return phy_restart_aneg(phydev);
> -
> +	if (ret > 0) {
> +		ret = phy_restart_aneg(phydev);
> +		if (ret < 0)
> +			return ret;
> +		return 1;
> +	}
>   	return 0;
>   }
>   EXPORT_SYMBOL(genphy_c45_ethtool_set_eee);
> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
> index 7f3629d56503..dad827717ad9 100644
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
> @@ -988,7 +988,8 @@ static int phy_check_link_status(struct phy_device *phydev)
>   		if (err < 0)
>   			phydev->enable_tx_lpi = false;
>   		else
> -			phydev->enable_tx_lpi = err;
> +			phydev->enable_tx_lpi = (err & phydev->eee_cfg.tx_lpi_enabled);
> +
>   		phy_link_up(phydev);
>   	} else if (!phydev->link && phydev->state != PHY_NOLINK) {
>   		phydev->state = PHY_NOLINK;
> @@ -1679,6 +1680,21 @@ int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_keee *data)
>   }
>   EXPORT_SYMBOL(phy_ethtool_get_eee);
>   
> +/* auto-neg not triggered, directly inform the MAC if something
> + * changed'

Stray ' character at the end here.

> + */
> +static void phy_ethtool_set_eee_noneg(struct phy_device *phydev,
> +				      struct ethtool_keee *data)
> +{
> +	if (phydev->eee_cfg.tx_lpi_enabled !=
> +	    data->tx_lpi_enabled) {
> +		eee_to_eeecfg(data, &phydev->eee_cfg);
> +		phydev->enable_tx_lpi = eeecfg_mac_can_tx_lpi(&phydev->eee_cfg);
> +		if (phydev->link)
> +			phy_link_up(phydev);
> +	}
> +}
> +
>   /**
>    * phy_ethtool_set_eee - set EEE supported and status
>    * @phydev: target phy_device struct
> @@ -1695,11 +1711,14 @@ int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_keee *data)
>   
>   	mutex_lock(&phydev->lock);
>   	ret = genphy_c45_ethtool_set_eee(phydev, data);
> -	if (!ret)
> +	if (ret >= 0) {
> +		if (ret == 0)
> +			phy_ethtool_set_eee_noneg(phydev, data);
>   		eee_to_eeecfg(data, &phydev->eee_cfg);
> +	}
>   	mutex_unlock(&phydev->lock);
>   
> -	return ret;
> +	return (ret < 0 ? ret : 0);

Don't think the parenthesis are needed but does not hurt.
-- 
Florian

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ