lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <e16f7a6ce9f2271846f06184fb89cd5cc4ae0682.camel@mediatek.com>
Date: Fri, 23 Feb 2024 05:50:23 +0000
From: CK Hu (胡俊光) <ck.hu@...iatek.com>
To: Shawn Sung (宋孝謙) <Shawn.Sung@...iatek.com>,
	"chunkuang.hu@...nel.org" <chunkuang.hu@...nel.org>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"linux-mediatek@...ts.infradead.org" <linux-mediatek@...ts.infradead.org>,
	"daniel@...ll.ch" <daniel@...ll.ch>, "p.zabel@...gutronix.de"
	<p.zabel@...gutronix.de>, "dri-devel@...ts.freedesktop.org"
	<dri-devel@...ts.freedesktop.org>,
	"shawn.sung@...iatek.corp-partner.google.com"
	<shawn.sung@...iatek.corp-partner.google.com>, "airlied@...il.com"
	<airlied@...il.com>, "linux-arm-kernel@...ts.infradead.org"
	<linux-arm-kernel@...ts.infradead.org>, "matthias.bgg@...il.com"
	<matthias.bgg@...il.com>
Subject: Re: [PATCH v3 1/1] drm/mediatek: Filter modes according to hardware
 capability

Hi, Shawn:

On Tue, 2024-02-20 at 17:37 +0800, Shawn Sung wrote:
> From: Hsiao Chien Sung <shawn.sung@...iatek.corp-partner.google.com>
> 
> We found a stability issue on MT8188 when connecting an external
> monitor
> in 2560x1440@...Hz mode. Checked with the designer, there is a
> function
> called "prefetch" which is working during VBP (triggered by VSYNC).
> If the duration of VBP is too short, the throughput requirement could
> increase more than 3 times and lead to stability issues.
> 
> The mode settings that VDOSYS supports are mainly affected by clock
> rate and throughput, display driver should filter these settings
> according to the SoC's limitation to avoid unstable conditions.
> 
> Since currently the mode filter is only available on MT8195 and
> MT8188
> and they share the same compatible name, the reference number (8250)
> is hard coded instead of in the driver data.

Reviewed-by: CK Hu <ck.hu@...iatek.com>

> 
> Signed-off-by: Hsiao Chien Sung <
> shawn.sung@...iatek.corp-partner.google.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_disp_drv.h       |  4 ++
>  drivers/gpu/drm/mediatek/mtk_disp_merge.c     | 65
> +++++++++++++++++++
>  .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c   | 17 +++++
>  drivers/gpu/drm/mediatek/mtk_drm_crtc.c       | 17 +++++
>  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c   |  1 +
>  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h   | 12 ++++
>  6 files changed, 116 insertions(+)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> index eb738f14f09e3..4a5661334fb1a 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> @@ -72,6 +72,8 @@ void mtk_merge_advance_config(struct device *dev,
> unsigned int l_w, unsigned int
>  			      struct cmdq_pkt *cmdq_pkt);
>  void mtk_merge_start_cmdq(struct device *dev, struct cmdq_pkt
> *cmdq_pkt);
>  void mtk_merge_stop_cmdq(struct device *dev, struct cmdq_pkt
> *cmdq_pkt);
> +enum drm_mode_status mtk_merge_mode_valid(struct device *dev,
> +					  const struct drm_display_mode
> *mode);
>  
>  void mtk_ovl_bgclr_in_on(struct device *dev);
>  void mtk_ovl_bgclr_in_off(struct device *dev);
> @@ -130,6 +132,8 @@ unsigned int mtk_ovl_adaptor_layer_nr(struct
> device *dev);
>  struct device *mtk_ovl_adaptor_dma_dev_get(struct device *dev);
>  const u32 *mtk_ovl_adaptor_get_formats(struct device *dev);
>  size_t mtk_ovl_adaptor_get_num_formats(struct device *dev);
> +enum drm_mode_status mtk_ovl_adaptor_mode_valid(struct device *dev,
> +						const struct
> drm_display_mode *mode);
>  
>  void mtk_rdma_bypass_shadow(struct device *dev);
>  int mtk_rdma_clk_enable(struct device *dev);
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_merge.c
> b/drivers/gpu/drm/mediatek/mtk_disp_merge.c
> index c19fb1836034d..80953b3e8ace6 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_merge.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_merge.c
> @@ -223,6 +223,71 @@ void mtk_merge_clk_disable(struct device *dev)
>  	clk_disable_unprepare(priv->clk);
>  }
>  
> +enum drm_mode_status mtk_merge_mode_valid(struct device *dev,
> +					  const struct drm_display_mode
> *mode)
> +{
> +	struct mtk_disp_merge *priv = dev_get_drvdata(dev);
> +	unsigned long rate = 0;
> +
> +	rate = clk_get_rate(priv->clk);
> +
> +	/* Convert to KHz and round the number */
> +	rate = (rate + 500) / 1000;
> +
> +	if (rate && mode->clock > rate) {
> +		dev_dbg(dev, "invalid clock: %d (>%lu)\n", mode->clock, 
> rate);
> +		return MODE_CLOCK_HIGH;
> +	}
> +
> +	/*
> +	 * Measure the bandwidth requirement of hardware prefetch (per
> frame)
> +	 *
> +	 * let N = prefetch buffer size in lines
> +	 *         (ex. N=3, then prefetch buffer size = 3 lines)
> +	 *
> +	 * prefetch size = htotal * N (pixels)
> +	 * time per line = 1 / fps / vtotal (seconds)
> +	 * duration      = vbp * time per line
> +	 *               = vbp / fps / vtotal
> +	 *
> +	 * data rate = prefetch size / duration
> +	 *           = htotal * N / (vbp / fps / vtotal)
> +	 *           = htotal * vtotal * fps * N / vbp
> +	 *           = clk * N / vbp (pixels per second)
> +	 *
> +	 * Say 4K60 (CEA-861) is the maximum mode supported by the SoC
> +	 * data rate = 594000K * N / 72 = 8250 (standard)
> +	 * (remove K * N due to the same unit)
> +	 *
> +	 * For 2560x1440@144 (clk=583600K, vbp=17):
> +	 * data rate = 583600 / 17 ~= 34329 > 8250 (NG)
> +	 *
> +	 * For 2560x1440@120 (clk=497760K, vbp=77):
> +	 * data rate = 497760 / 77 ~= 6464 < 8250 (OK)
> +	 *
> +	 * A non-standard 4K60 timing (clk=521280K, vbp=54)
> +	 * data rate = 521280 / 54 ~= 9653 > 8250 (NG)
> +	 *
> +	 * Bandwidth requirement of hardware prefetch increases
> significantly
> +	 * when the VBP decreases (more than 4x in this example).
> +	 *
> +	 * The proposed formula is only one way to estimate whether our
> SoC
> +	 * supports the mode setting. The basic idea behind it is just
> to check
> +	 * if the data rate requirement is too high (directly
> proportional to
> +	 * pixel clock, inversely proportional to vbp). Please adjust
> the
> +	 * function if it doesn't fit your situation in the future.
> +	 */
> +	rate = mode->clock / (mode->vtotal - mode->vsync_end);
> +
> +	if (rate > 8250) {
> +		dev_dbg(dev, "invalid rate: %lu (>8250): " DRM_MODE_FMT
> "\n",
> +			rate, DRM_MODE_ARG(mode));
> +		return MODE_BAD;
> +	}
> +
> +	return MODE_OK;
> +}
> +
>  static int mtk_disp_merge_bind(struct device *dev, struct device
> *master,
>  			       void *data)
>  {
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> index 10d23e76acaa9..6d4334955e3d3 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> @@ -88,6 +88,7 @@ static const struct mtk_ddp_comp_funcs ethdr = {
>  static const struct mtk_ddp_comp_funcs merge = {
>  	.clk_enable = mtk_merge_clk_enable,
>  	.clk_disable = mtk_merge_clk_disable,
> +	.mode_valid = mtk_merge_mode_valid,
>  };
>  
>  static const struct mtk_ddp_comp_funcs padding = {
> @@ -341,6 +342,22 @@ void mtk_ovl_adaptor_clk_disable(struct device
> *dev)
>  	}
>  }
>  
> +enum drm_mode_status mtk_ovl_adaptor_mode_valid(struct device *dev,
> +						const struct
> drm_display_mode *mode)
> +
> +{
> +	int i;
> +	struct mtk_disp_ovl_adaptor *ovl_adaptor =
> dev_get_drvdata(dev);
> +
> +	for (i = 0; i < OVL_ADAPTOR_ID_MAX; i++) {
> +		dev = ovl_adaptor->ovl_adaptor_comp[i];
> +		if (!dev || !comp_matches[i].funcs->mode_valid)
> +			continue;
> +		return comp_matches[i].funcs->mode_valid(dev, mode);
> +	}
> +	return MODE_OK;
> +}
> +
>  unsigned int mtk_ovl_adaptor_layer_nr(struct device *dev)
>  {
>  	return MTK_OVL_ADAPTOR_LAYER_NUM;
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> index 1dac8d0fbc669..14cf75fa217f9 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> @@ -212,6 +212,22 @@ static void mtk_drm_crtc_destroy_state(struct
> drm_crtc *crtc,
>  	kfree(to_mtk_crtc_state(state));
>  }
>  
> +static enum drm_mode_status
> +mtk_drm_crtc_mode_valid(struct drm_crtc *crtc,
> +			const struct drm_display_mode *mode)
> +{
> +	struct mtk_drm_crtc *mtk_crtc = to_mtk_crtc(crtc);
> +	enum drm_mode_status status = MODE_OK;
> +	int i;
> +
> +	for (i = 0; i < mtk_crtc->ddp_comp_nr; i++) {
> +		status = mtk_ddp_comp_mode_valid(mtk_crtc->ddp_comp[i], 
> mode);
> +		if (status != MODE_OK)
> +			break;
> +	}
> +	return status;
> +}
> +
>  static bool mtk_drm_crtc_mode_fixup(struct drm_crtc *crtc,
>  				    const struct drm_display_mode
> *mode,
>  				    struct drm_display_mode
> *adjusted_mode)
> @@ -830,6 +846,7 @@ static const struct drm_crtc_funcs mtk_crtc_funcs
> = {
>  static const struct drm_crtc_helper_funcs mtk_crtc_helper_funcs = {
>  	.mode_fixup	= mtk_drm_crtc_mode_fixup,
>  	.mode_set_nofb	= mtk_drm_crtc_mode_set_nofb,
> +	.mode_valid	= mtk_drm_crtc_mode_valid,
>  	.atomic_begin	= mtk_drm_crtc_atomic_begin,
>  	.atomic_flush	= mtk_drm_crtc_atomic_flush,
>  	.atomic_enable	= mtk_drm_crtc_atomic_enable,
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> index 9633e860cc3ce..94590227c56a9 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> @@ -416,6 +416,7 @@ static const struct mtk_ddp_comp_funcs
> ddp_ovl_adaptor = {
>  	.remove = mtk_ovl_adaptor_remove_comp,
>  	.get_formats = mtk_ovl_adaptor_get_formats,
>  	.get_num_formats = mtk_ovl_adaptor_get_num_formats,
> +	.mode_valid = mtk_ovl_adaptor_mode_valid,
>  };
>  
>  static const char * const mtk_ddp_comp_stem[MTK_DDP_COMP_TYPE_MAX] =
> {
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> index f8c7e8d8ddc12..215b7234ff13c 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> @@ -12,6 +12,8 @@
>  #include <linux/soc/mediatek/mtk-mmsys.h>
>  #include <linux/soc/mediatek/mtk-mutex.h>
>  
> +#include <drm/drm_modes.h>
> +
>  struct device;
>  struct device_node;
>  struct drm_crtc;
> @@ -84,6 +86,7 @@ struct mtk_ddp_comp_funcs {
>  	void (*add)(struct device *dev, struct mtk_mutex *mutex);
>  	void (*remove)(struct device *dev, struct mtk_mutex *mutex);
>  	unsigned int (*encoder_index)(struct device *dev);
> +	enum drm_mode_status (*mode_valid)(struct device *dev, const
> struct drm_display_mode *mode);
>  };
>  
>  struct mtk_ddp_comp {
> @@ -125,6 +128,15 @@ static inline void
> mtk_ddp_comp_clk_disable(struct mtk_ddp_comp *comp)
>  		comp->funcs->clk_disable(comp->dev);
>  }
>  
> +static inline
> +enum drm_mode_status mtk_ddp_comp_mode_valid(struct mtk_ddp_comp
> *comp,
> +					     const struct
> drm_display_mode *mode)
> +{
> +	if (comp && comp->funcs && comp->funcs->mode_valid)
> +		return comp->funcs->mode_valid(comp->dev, mode);
> +	return MODE_OK;
> +}
> +
>  static inline void mtk_ddp_comp_config(struct mtk_ddp_comp *comp,
>  				       unsigned int w, unsigned int h,
>  				       unsigned int vrefresh, unsigned
> int bpc,

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ