[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZdnIp8PPtfbuIzwP@linux-8mug>
Date: Sat, 24 Feb 2024 18:44:55 +0800
From: Chester Lin <chester62515@...il.com>
To: Ghennadi Procopciuc <ghennadi.procopciuc@....nxp.com>
Cc: Andreas Farber <afaerber@...e.de>, Matthias Brugger <mbrugger@...e.com>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>, NXP S32 Linux Team <s32@....com>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
NXP Linux Team <linux-imx@....com>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
Ghennadi Procopciuc <ghennadi.procopciuc@....com>,
Ciprian Costea <ciprianmarian.costea@....com>
Subject: Re: [PATCH v2 2/2] arm64: dts: s32g: add uSDHC node
Hi Ghennadi,
On Sat, Feb 24, 2024 at 04:22:30PM +0800, Chester Lin wrote:
> Hi Ghennadi,
>
> On Mon, Jan 22, 2024 at 04:06:01PM +0200, Ghennadi Procopciuc wrote:
> > From: Ghennadi Procopciuc <ghennadi.procopciuc@....com>
> >
> > Add the uSDHC node for the boards that are based on S32G SoCs.
> >
> > Signed-off-by: Ciprian Costea <ciprianmarian.costea@....com>
> > Signed-off-by: Ghennadi Procopciuc <ghennadi.procopciuc@....com>
> > ---
> > arch/arm64/boot/dts/freescale/s32g2.dtsi | 10 ++++++++++
> > arch/arm64/boot/dts/freescale/s32g274a-evb.dts | 6 +++++-
> > arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts | 6 +++++-
> > 3 files changed, 20 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
> > index ef1a1d61f2ba..fc19ae2e8d3b 100644
> > --- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
> > @@ -138,6 +138,16 @@ uart2: serial@...bc000 {
> > status = "disabled";
> > };
> >
> > + usdhc0: mmc@...f0000 {
> > + compatible = "nxp,s32g2-usdhc";
> > + reg = <0x402f0000 0x1000>;
> > + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&clks 32>, <&clks 31>, <&clks 33>;
>
> Same as I have mentioned in [PATCH v2 1/2], could we have fixed dt-bindings to
> replace with these raw clock id values (32, 31, 33)?
>
Just found the previous review discussion in v1:
https://lore.kernel.org/all/f54d947c-58dc-498f-8871-b472f97be4a8@oss.nxp.com/
What I'm worried is that, could these raw clock IDs be rearranged in the
downstream TF-A? If so it would cause ABI inconsistency and clock issues
since the kernel is not aware of any raw ID changes in downstream TF-A.
Chester
> > + clock-names = "ipg", "ahb", "per";
> > + bus-width = <8>;
> > + status = "disabled";
> > + };
> > +
> > gic: interrupt-controller@...00000 {
> > compatible = "arm,gic-v3";
> > reg = <0x50800000 0x10000>,
> > diff --git a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
> > index 9118d8d2ee01..00070c949e2a 100644
> > --- a/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
> > +++ b/arch/arm64/boot/dts/freescale/s32g274a-evb.dts
> > @@ -1,7 +1,7 @@
> > // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> > /*
> > * Copyright (c) 2021 SUSE LLC
> > - * Copyright (c) 2019-2021 NXP
> > + * Copyright 2019-2021, 2024 NXP
> > */
> >
> > /dts-v1/;
> > @@ -32,3 +32,7 @@ memory@...00000 {
> > &uart0 {
> > status = "okay";
> > };
> > +
> > +&usdhc0 {
> > + status = "okay";
> > +};
> > diff --git a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
> > index e05ee854cdf5..b3fc12899cae 100644
> > --- a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
> > +++ b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
> > @@ -1,7 +1,7 @@
> > // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
> > /*
> > * Copyright (c) 2021 SUSE LLC
> > - * Copyright (c) 2019-2021 NXP
> > + * Copyright 2019-2021, 2024 NXP
> > */
> >
> > /dts-v1/;
> > @@ -38,3 +38,7 @@ &uart0 {
> > &uart1 {
> > status = "okay";
> > };
> > +
> > +&usdhc0 {
> > + status = "okay";
> > +};
> > --
> > 2.43.0
> >
Powered by blists - more mailing lists