lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <86edcz2vrz.wl-maz@kernel.org>
Date: Mon, 26 Feb 2024 13:35:28 +0000
From: Marc Zyngier <maz@...nel.org>
To: James Clark <james.clark@....com>
Cc: coresight@...ts.linaro.org,
	linux-arm-kernel@...ts.infradead.org,
	kvmarm@...ts.linux.dev,
	suzuki.poulose@....com,
	acme@...nel.org,
	oliver.upton@...ux.dev,
	broonie@...nel.org,
	James Morse <james.morse@....com>,
	Zenghui Yu <yuzenghui@...wei.com>,
	Catalin Marinas <catalin.marinas@....com>,
	Will Deacon <will@...nel.org>,
	Mike Leach <mike.leach@...aro.org>,
	Alexander Shishkin <alexander.shishkin@...ux.intel.com>,
	Anshuman Khandual <anshuman.khandual@....com>,
	Miguel Luis <miguel.luis@...cle.com>,
	Joey Gouly <joey.gouly@....com>,
	Ard Biesheuvel <ardb@...nel.org>,
	Quentin Perret <qperret@...gle.com>,
	Javier Martinez Canillas <javierm@...hat.com>,
	Mark Rutland <mark.rutland@....com>,
	Arnd Bergmann <arnd@...db.de>,
	Vincent Donnefort <vdonnefort@...gle.com>,
	Ryan Roberts <ryan.roberts@....com>,
	Fuad Tabba <tabba@...gle.com>,
	Jing Zhang <jingzhangos@...gle.com>,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH v6 5/8] arm64: KVM: Add iflag for FEAT_TRF

On Mon, 26 Feb 2024 11:30:33 +0000,
James Clark <james.clark@....com> wrote:
> 
> Add an extra iflag to signify if the TRFCR register is accessible.

That's not what this flag means: it indicates whether TRFCR needs to
be saved. At lease that's what the name suggests.

> Because TRBE requires FEAT_TRF, DEBUG_STATE_SAVE_TRBE still has the same
> behavior even though it's only set when FEAT_TRF is present.

This sentence seems completely out of context, because you didn't
explain that you were making TRBE *conditional* on TRF being
implemented, as per the architecture requirements.

> 
> The following holes are left in struct kvm_vcpu_arch, but there aren't
> enough other 8 bit fields to rearrange it to leave any hole smaller than
> 7 bytes:
> 
>   u8                         cflags;               /*  2292     1 */
>   /* XXX 1 byte hole, try to pack */
>   u16                        iflags;               /*  2294     2 */
>   u8                         sflags;               /*  2296     1 */
>   bool                       pause;                /*  2297     1 */
>   /* XXX 6 bytes hole, try to pack */

I don't think that's particularly useful in a commit message, but more
relevant to the cover letter. However, see below.

> 
> Reviewed-by: Suzuki K Poulose <suzuki.poulose@....com>
> Signed-off-by: James Clark <james.clark@....com>
> ---
>  arch/arm64/include/asm/kvm_host.h |  4 +++-
>  arch/arm64/kvm/debug.c            | 24 ++++++++++++++++++++----
>  2 files changed, 23 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
> index 21c57b812569..85b5477bd1b4 100644
> --- a/arch/arm64/include/asm/kvm_host.h
> +++ b/arch/arm64/include/asm/kvm_host.h
> @@ -569,7 +569,7 @@ struct kvm_vcpu_arch {
>  	u8 cflags;
>  
>  	/* Input flags to the hypervisor code, potentially cleared after use */
> -	u8 iflags;
> +	u16 iflags;
>  
>  	/* State flags for kernel bookkeeping, unused by the hypervisor code */
>  	u8 sflags;
> @@ -779,6 +779,8 @@ struct kvm_vcpu_arch {
>  #define DEBUG_STATE_SAVE_TRBE	__vcpu_single_flag(iflags, BIT(6))
>  /* vcpu running in HYP context */
>  #define VCPU_HYP_CONTEXT	__vcpu_single_flag(iflags, BIT(7))
> +/* Save trace filter controls */
> +#define DEBUG_STATE_SAVE_TRFCR	__vcpu_single_flag(iflags, BIT(8))

I'd rather you cherry-pick [1] and avoid expanding the iflags.

[1] https://lore.kernel.org/r/20240226100601.2379693-4-maz@kernel.org

Now, I think the whole SPE/TRBE/TRCR flag management should be
improved, see below.

>
>  /* SVE enabled for host EL0 */
>  #define HOST_SVE_ENABLED	__vcpu_single_flag(sflags, BIT(0))
> diff --git a/arch/arm64/kvm/debug.c b/arch/arm64/kvm/debug.c
> index ce8886122ed3..49a13e72ddd2 100644
> --- a/arch/arm64/kvm/debug.c
> +++ b/arch/arm64/kvm/debug.c
> @@ -332,14 +332,30 @@ void kvm_arch_vcpu_load_debug_state_flags(struct kvm_vcpu *vcpu)
>  	    !(read_sysreg_s(SYS_PMBIDR_EL1) & BIT(PMBIDR_EL1_P_SHIFT)))
>  		vcpu_set_flag(vcpu, DEBUG_STATE_SAVE_SPE);
>  
> -	/* Check if we have TRBE implemented and available at the host */
> -	if (cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_EL1_TraceBuffer_SHIFT) &&
> -	    !(read_sysreg_s(SYS_TRBIDR_EL1) & TRBIDR_EL1_P))
> -		vcpu_set_flag(vcpu, DEBUG_STATE_SAVE_TRBE);
> +	/*
> +	 * Set SAVE_TRFCR flag if FEAT_TRF (TraceFilt) exists. This flag
> +	 * signifies that the exclude_host/exclude_guest settings of any active
> +	 * host Perf session on a core running a VCPU can be written into
> +	 * TRFCR_EL1 on guest switch.
> +	 */
> +	if (cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_EL1_TraceFilt_SHIFT)) {
> +		vcpu_set_flag(vcpu, DEBUG_STATE_SAVE_TRFCR);

Can we avoid doing this unconditionally? It only makes sense to save
the trace crud if it is going to be changed, right?

> +		/*
> +		 * Check if we have TRBE implemented and available at the host.
> +		 * If it's in use at the time of guest switch then trace will
> +		 * need to be completely disabled. The architecture mandates
> +		 * FEAT_TRF with TRBE, so we only need to check for TRBE after
> +		 * TRF.
> +		 */
> +		if (cpuid_feature_extract_unsigned_field(dfr0, ID_AA64DFR0_EL1_TraceBuffer_SHIFT) &&
> +		    !(read_sysreg_s(SYS_TRBIDR_EL1) & TRBIDR_EL1_P))
> +			vcpu_set_flag(vcpu, DEBUG_STATE_SAVE_TRBE);
> +	}
>  }
>  
>  void kvm_arch_vcpu_put_debug_state_flags(struct kvm_vcpu *vcpu)
>  {
>  	vcpu_clear_flag(vcpu, DEBUG_STATE_SAVE_SPE);
>  	vcpu_clear_flag(vcpu, DEBUG_STATE_SAVE_TRBE);
> +	vcpu_clear_flag(vcpu, DEBUG_STATE_SAVE_TRFCR);
>  }

Dealing with flags that are strongly coupled in a disjoined way a
pretty bad idea. Look at the generated code, and realise we flip the
preempt flag on each access.

Can we do better? You bet. The vcpu_{set,clear}_flags infrastructure
is capable of dealing with multiple flags at once, as demonstrated by
the way we deal with exception encoding.

Something like:

diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index addf79ba8fa0..3e50e535fdd4 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -885,6 +885,10 @@ struct kvm_vcpu_arch {
 #define DEBUG_STATE_SAVE_SPE	__vcpu_single_flag(iflags, BIT(5))
 /* Save TRBE context if active  */
 #define DEBUG_STATE_SAVE_TRBE	__vcpu_single_flag(iflags, BIT(6))
+/* Save Trace Filter Controls  */
+#define DEBUG_STATE_SAVE_TRFCR	__vcpu_single_flag(iflags, BIT(7))
+/* Global debug mask */
+#define DEBUG_STATE_SAVE_MASK	__vcpu_single_flag(iflags, GENMASK(7, 5))
 
 /* SVE enabled for host EL0 */
 #define HOST_SVE_ENABLED	__vcpu_single_flag(sflags, BIT(0))
diff --git a/arch/arm64/kvm/debug.c b/arch/arm64/kvm/debug.c
index 8725291cb00a..f9b197a00582 100644
--- a/arch/arm64/kvm/debug.c
+++ b/arch/arm64/kvm/debug.c
@@ -339,6 +339,6 @@ void kvm_arch_vcpu_load_debug_state_flags(struct kvm_vcpu *vcpu)
 
 void kvm_arch_vcpu_put_debug_state_flags(struct kvm_vcpu *vcpu)
 {
-	vcpu_clear_flag(vcpu, DEBUG_STATE_SAVE_SPE);
-	vcpu_clear_flag(vcpu, DEBUG_STATE_SAVE_TRBE);
+	if (!has_vhe())
+	    vcpu_clear_flag(vcpu, DEBUG_STATE_SAVE_MASK);
 }

Thanks,

	M.

-- 
Without deviation from the norm, progress is not possible.

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ