Message-ID: <20240226125226.705efef3@booty>
Date: Mon, 26 Feb 2024 12:52:26 +0100
From: Luca Ceresoli <luca.ceresoli@...tlin.com>
To: Saravana Kannan <saravanak@...gle.com>
Cc: Rob Herring <robh+dt@...nel.org>, Frank Rowand <frowand.list@...il.com>,
 Greg Kroah-Hartman <gregkh@...uxfoundation.org>, Xu Yang
 <xu.yang_2@....com>, kernel-team@...roid.com, devicetree@...r.kernel.org,
 linux-kernel@...r.kernel.org, Hervé Codina
 <herve.codina@...tlin.com>, Geert Uytterhoeven <geert@...ux-m68k.org>
Subject: [REGRESSION] Re: [PATCH v2 2/3] of: property: Improve finding the
 supplier of a remote-endpoint property

Hello Saravana,

On Fri, 23 Feb 2024 17:35:24 -0800
Saravana Kannan <saravanak@...gle.com> wrote:

> On Fri, Feb 23, 2024 at 8:18 AM Luca Ceresoli <luca.ceresoli@...tlin.com> wrote:
> >
> > Hello Saravana,
> >
> > [+cc Hervé Codina]
> >
> > On Tue,  6 Feb 2024 17:18:01 -0800
> > Saravana Kannan <saravanak@...gle.com> wrote:
> >  
> > > After commit 4a032827daa8 ("of: property: Simplify of_link_to_phandle()"),
> > > remote-endpoint properties created a fwnode link from the consumer device
> > > to the supplier endpoint. This is a tiny bit inefficient (not buggy) when
> > > trying to create device links or detecting cycles. So, improve this the
> > > same way we improved finding the consumer of a remote-endpoint property.
> > >
> > > Fixes: 4a032827daa8 ("of: property: Simplify of_link_to_phandle()")
> > > Signed-off-by: Saravana Kannan <saravanak@...gle.com>  
> >
> > After rebasing my own branch on v6.8-rc5 from v6.8-rc1 I started
> > getting unexpected warnings during device tree overlay removal. After a
> > somewhat painful bisection I identified this patch as the one that
> > triggers it all.  
> 
> Thanks for the report.
> 
> >  
> > > ---
> > > --- a/drivers/of/property.c
> > > +++ b/drivers/of/property.c
> > > @@ -1232,7 +1232,6 @@ DEFINE_SIMPLE_PROP(pinctrl5, "pinctrl-5", NULL)
> > >  DEFINE_SIMPLE_PROP(pinctrl6, "pinctrl-6", NULL)
> > >  DEFINE_SIMPLE_PROP(pinctrl7, "pinctrl-7", NULL)
> > >  DEFINE_SIMPLE_PROP(pinctrl8, "pinctrl-8", NULL)
> > > -DEFINE_SIMPLE_PROP(remote_endpoint, "remote-endpoint", NULL)
> > >  DEFINE_SIMPLE_PROP(pwms, "pwms", "#pwm-cells")
> > >  DEFINE_SIMPLE_PROP(resets, "resets", "#reset-cells")
> > >  DEFINE_SIMPLE_PROP(leds, "leds", NULL)
> > > @@ -1298,6 +1297,17 @@ static struct device_node *parse_interrupts(struct device_node *np,
> > >       return of_irq_parse_one(np, index, &sup_args) ? NULL : sup_argsnp;
> > >  }
> > >
> > > +static struct device_node *parse_remote_endpoint(struct device_node *np,
> > > +                                              const char *prop_name,
> > > +                                              int index)
> > > +{
> > > +     /* Return NULL for index > 0 to signify end of remote-endpoints */
> > > +     if (!index || strcmp(prop_name, "remote-endpoint"))  
> >
> > There seem to be a bug here: "!index" should be "index > 0", as the
> > comment suggests. Otherwise NULL is always returned.  
> 
> Ah crap, I think you are right. It should have been "index". Not
> "!index". But I tested this! Sigh. I probably screwed up my testing.
> 
> Please send out a Fix for this.
> 
> Geert, we got excited too soon. :(
> 
> > I am going to send a quick patch for that, but haven't done so yet
> > because it still won't solve the problem, so I wanted to open the topic
> > here without further delay.
> >
> > Even with the 'index > 0' fix I'm still getting pretty much the same:  
> 
> This part is confusing though. If I read your DT correctly, there's a
> cycle between platform:panel-dsi-lvds and i2c:13-002c. And fw_devlink
> should not be enforcing any ordering between those devices ever.
> 
> I'm surprised that in your "working" case, fw_devlink didn't detect
> any cycle. It should have. If there's any debugging to do, that's the
> one we need to debug.
> 
> >
> > [   34.836781] ------------[ cut here ]------------
> > [   34.841401] WARNING: CPU: 2 PID: 204 at drivers/base/devres.c:1064 devm_kfree+0x8c/0xfc
> > ...
> > [   35.024751] Call trace:
> > [   35.027199]  devm_kfree+0x8c/0xfc
> > [   35.030520]  devm_drm_panel_bridge_release+0x54/0x64 [drm_kms_helper]
> > [   35.036990]  devres_release_group+0xe0/0x164
> > [   35.041264]  i2c_device_remove+0x38/0x9c
> > [   35.045196]  device_remove+0x4c/0x80
> > [   35.048774]  device_release_driver_internal+0x1d4/0x230
> > [   35.054003]  device_release_driver+0x18/0x24
> > [   35.058279]  bus_remove_device+0xcc/0x10c
> > [   35.062292]  device_del+0x15c/0x41c
> > [   35.065786]  device_unregister+0x18/0x34
> > [   35.069714]  i2c_unregister_device+0x54/0x88
> > [   35.073988]  of_i2c_notify+0x98/0x224
> > [   35.077656]  blocking_notifier_call_chain+0x6c/0xa0
> > [   35.082543]  __of_changeset_entry_notify+0x100/0x16c
> > [   35.087515]  __of_changeset_revert_notify+0x44/0x78
> > [   35.092398]  of_overlay_remove+0x114/0x1c4
> > ...
> >
> > By comparing the two versions I found that before removing the overlay:
> >
> >  * in the "working" case (with this patch reverted) I have:
> >
> >    # ls /sys/class/devlink/ | grep 002c
> >    platform:hpbr--i2c:13-002c
> >    platform:panel-dsi-lvds--i2c:13-002c  
> 
> Can you check the "status" and "sync_state_only" file in this folder
> and tell me what it says?
> 
> Since these devices have a cyclic dependency between them, it should
> have been something other than "not tracked" and "sync_state_only"
> should be "1". But my guess is you'll see "active" and "0".
> 
> >    platform:regulator-sys-1v8--i2c:13-002c
> >    regulator:regulator.31--i2c:13-002c
> >    #
> >
> >  * in the "broken" case (v6.8-rc5 + s/!index/index > 0/ as mentioned):
> >
> >    # ls /sys/class/devlink/ | grep 002c
> >    platform:hpbr--i2c:13-002c
> >    platform:regulator-sys-1v8--i2c:13-002c
> >    regulator:regulator.30--i2c:13-002c
> >    #
> >
> > So in the latter case the panel-dsi-lvds--i2c:13-002c link is missing.
> > I think it gets created but later on removed. Here's a snippet of the
> > kernel log when that happens:
> >
> > [    9.578279] ----- cycle: start -----
> > [    9.578283] /soc@...us@...00000/i2c@...d0000/i2cmux@...i2c@...si-lvds-bridge@2c: cycle: depends on /panel-dsi-lvds
> > [    9.578308] /panel-dsi-lvds: cycle: depends on /soc@...us@...00000/i2c@...d0000/i2cmux@...i2c@...si-lvds-bridge@2c
> > [    9.578329] ----- cycle: end -----
> > [    9.578334] platform panel-dsi-lvds: Fixed dependency cycle(s) with /soc@...us@...00000/i2c@...d0000/i2cmux@...i2c@...si-lvds-bridge@2c
> > ...  
> 
> Somewhere in this area, I'm thinking you'll also see "device:
> 'i2c:13-002c--platform:panel-dsi-lvds': device_add" do you not? And if
> you enabled device link logs, you'll see that it was "sync state only"
> link.
> 
> > [    9.590620] /panel-dsi-lvds Dropping the fwnode link to /soc@...us@...00000/i2c@...d0000/i2cmux@...i2c@...si-lvds-bridge@2c
> > ...
> > [    9.597280] ----- cycle: start -----
> > [    9.597283] /panel-dsi-lvds: cycle: depends on /soc@...us@...00000/i2c@...d0000/i2cmux@...i2c@...si-lvds-bridge@2c
> > [    9.602781] /soc@...us@...00000/i2c@...d0000/i2cmux@...i2c@...si-lvds-bridge@2c: cycle: depends on /panel-dsi-lvds
> > [    9.607581] ----- cycle: end -----
> > [    9.607585] i2c 13-002c: Fixed dependency cycle(s) with /panel-dsi-lvds
> > [    9.614217] device: 'platform:panel-dsi-lvds--i2c:13-002c': device_add
> > ...
> > [    9.614277] /soc@...us@...00000/i2c@...d0000/i2cmux@...i2c@...si-lvds-bridge@2c Dropping the fwnode link to /panel-dsi-lvds
> > [    9.614369] /soc@...us@...00000/i2c@...d0000/i2cmux@...i2c@...si-lvds-bridge@2c Dropping the fwnode link to /regulator-dock-sys-1v8
> > ...
> > [    9.739840] panel-simple panel-dsi-lvds: Dropping the link to 13-002c
> > [    9.739846] device: 'i2c:13-002c--platform:panel-dsi-lvds': device_unregister  
> 
> Oh yeah, see. The "device_add" I expected earlier is getting removed here.
> 
> > [   10.247037] sn65dsi83 13-002c: Dropping the link to panel-dsi-lvds
> > [   10.247049] device: 'platform:panel-dsi-lvds--i2c:13-002c': device_unregister
> >
> > And here's the relevant portion of my device tree overlay:
> >
> > --------------------8<--------------------
> >  
> 
> I think the eventual fix would be this series + adding a
> "post-init-providers" property to the device that's supposed to probe
> first and point it to the device that's supposed to probe next. Do
> this at the device node level, not the endpoint level.
> https://lore.kernel.org/lkml/20240221233026.2915061-1-saravanak@google.com/

I'm certainly going to look at this series in more detail and at the
debugging you asked for, however I'm afraid I won't have access to the
hardware this week and it's not going to be a quick task anyway.

So in this moment I think it's quite clear that this specific patch
creates a regression and there is no clear fix that is reasonably
likely to get merged before 6.8.

I propose reverting this patch immediately, unless you have a better
short-term solution.

Luca

-- 
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Powered by blists - more mailing lists