| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240227163758.198133-5-jiajie.ho@starfivetech.com>
Date: Wed, 28 Feb 2024 00:37:56 +0800
From: Jia Jie Ho <jiajie.ho@...rfivetech.com>
To: Herbert Xu <herbert@...dor.apana.org.au>,
"David S . Miller" <davem@...emloft.net>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Eugeniy Paltsev <Eugeniy.Paltsev@...opsys.com>,
Vinod Koul <vkoul@...nel.org>,
linux-crypto@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
dmaengine@...r.kernel.org
Subject: [PATCH v3 4/6] dmaengine: dw-axi-dmac: Support hardware quirks
Adds separate dma hardware descriptor setup for JH8100 hardware quirks.
JH8100 engine uses AXI1 master for data transfer but current dma driver
is hardcoded to use AXI0 only. The FIFO offset needs to be incremented due
to hardware limitations.
Signed-off-by: Jia Jie Ho <jiajie.ho@...rfivetech.com>
---
.../dma/dw-axi-dmac/dw-axi-dmac-platform.c | 32 ++++++++++++++++---
drivers/dma/dw-axi-dmac/dw-axi-dmac.h | 2 ++
include/linux/dma/dw_axi.h | 11 +++++++
3 files changed, 40 insertions(+), 5 deletions(-)
create mode 100644 include/linux/dma/dw_axi.h
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index 2a4747917a3e..056b6ee1963b 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -647,6 +647,7 @@ static void set_desc_dest_master(struct axi_dma_hw_desc *hw_desc,
static int dw_axi_dma_set_hw_desc(struct axi_dma_chan *chan,
struct axi_dma_hw_desc *hw_desc,
+ struct axi_dma_desc *desc,
dma_addr_t mem_addr, size_t len)
{
unsigned int data_width = BIT(chan->chip->dw->hdata->m_data_width);
@@ -655,6 +656,8 @@ static int dw_axi_dma_set_hw_desc(struct axi_dma_chan *chan,
dma_addr_t device_addr;
size_t axi_block_ts;
size_t block_ts;
+ bool hw_quirks = chan->quirks & DWAXIDMAC_STARFIVE_SM_ALGO;
+ u32 val;
u32 ctllo, ctlhi;
u32 burst_len, src_burst_trans_len, dst_burst_trans_len;
@@ -675,7 +678,8 @@ static int dw_axi_dma_set_hw_desc(struct axi_dma_chan *chan,
device_addr = chan->config.dst_addr;
ctllo = reg_width << CH_CTL_L_DST_WIDTH_POS |
mem_width << CH_CTL_L_SRC_WIDTH_POS |
- DWAXIDMAC_CH_CTL_L_NOINC << CH_CTL_L_DST_INC_POS |
+ (hw_quirks ? DWAXIDMAC_CH_CTL_L_INC << CH_CTL_L_DST_INC_POS :
+ DWAXIDMAC_CH_CTL_L_NOINC << CH_CTL_L_DST_INC_POS) |
DWAXIDMAC_CH_CTL_L_INC << CH_CTL_L_SRC_INC_POS;
block_ts = len >> mem_width;
break;
@@ -685,7 +689,8 @@ static int dw_axi_dma_set_hw_desc(struct axi_dma_chan *chan,
ctllo = reg_width << CH_CTL_L_SRC_WIDTH_POS |
mem_width << CH_CTL_L_DST_WIDTH_POS |
DWAXIDMAC_CH_CTL_L_INC << CH_CTL_L_DST_INC_POS |
- DWAXIDMAC_CH_CTL_L_NOINC << CH_CTL_L_SRC_INC_POS;
+ (hw_quirks ? DWAXIDMAC_CH_CTL_L_INC << CH_CTL_L_SRC_INC_POS :
+ DWAXIDMAC_CH_CTL_L_NOINC << CH_CTL_L_SRC_INC_POS);
block_ts = len >> reg_width;
break;
default:
@@ -738,6 +743,17 @@ static int dw_axi_dma_set_hw_desc(struct axi_dma_chan *chan,
set_desc_src_master(hw_desc);
+ if (hw_quirks) {
+ if (chan->direction == DMA_MEM_TO_DEV) {
+ set_desc_dest_master(hw_desc, desc);
+ } else {
+ /* Select AXI1 for src master */
+ val = le32_to_cpu(hw_desc->lli->ctl_lo);
+ val |= CH_CTL_L_SRC_MAST;
+ hw_desc->lli->ctl_lo = cpu_to_le32(val);
+ }
+ }
+
hw_desc->len = len;
return 0;
}
@@ -814,8 +830,8 @@ dw_axi_dma_chan_prep_cyclic(struct dma_chan *dchan, dma_addr_t dma_addr,
for (i = 0; i < total_segments; i++) {
hw_desc = &desc->hw_desc[i];
- status = dw_axi_dma_set_hw_desc(chan, hw_desc, src_addr,
- segment_len);
+ status = dw_axi_dma_set_hw_desc(chan, hw_desc, NULL,
+ src_addr, segment_len);
if (status < 0)
goto err_desc_get;
@@ -897,7 +913,8 @@ dw_axi_dma_chan_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
do {
hw_desc = &desc->hw_desc[loop++];
- status = dw_axi_dma_set_hw_desc(chan, hw_desc, mem, segment_len);
+ status = dw_axi_dma_set_hw_desc(chan, hw_desc, desc,
+ mem, segment_len);
if (status < 0)
goto err_desc_get;
@@ -1035,8 +1052,13 @@ static int dw_axi_dma_chan_slave_config(struct dma_chan *dchan,
struct dma_slave_config *config)
{
struct axi_dma_chan *chan = dchan_to_axi_dma_chan(dchan);
+ struct dw_axi_peripheral_config *periph = config->peripheral_config;
memcpy(&chan->config, config, sizeof(*config));
+ if (config->peripheral_size == sizeof(*periph))
+ chan->quirks = periph->quirks;
+ else
+ chan->quirks = 0;
return 0;
}
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
index 652e983409ba..f0ab5b692b21 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
@@ -14,6 +14,7 @@
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/dmaengine.h>
+#include <linux/dma/dw_axi.h>
#include <linux/types.h>
#include "../virt-dma.h"
@@ -50,6 +51,7 @@ struct axi_dma_chan {
struct dma_slave_config config;
enum dma_transfer_direction direction;
bool cyclic;
+ u32 quirks;
/* these other elements are all protected by vc.lock */
bool is_paused;
};
diff --git a/include/linux/dma/dw_axi.h b/include/linux/dma/dw_axi.h
new file mode 100644
index 000000000000..fd49152869a4
--- /dev/null
+++ b/include/linux/dma/dw_axi.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __LINUX_DMA_DW_AXI_H
+#define __LINUX_DMA_DW_AXI_H
+
+#include <linux/types.h>
+
+struct dw_axi_peripheral_config {
+#define DWAXIDMAC_STARFIVE_SM_ALGO BIT(0)
+ u32 quirks;
+};
+#endif /* __LINUX_DMA_DW_AXI_H */
--
2.34.1
Powered by blists - more mailing lists