[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20240227182346.6e67cc88@booty>
Date: Tue, 27 Feb 2024 18:23:46 +0100
From: Luca Ceresoli <luca.ceresoli@...tlin.com>
To: Adam Ford <aford173@...il.com>
Cc: Marco Felsch <m.felsch@...gutronix.de>,
linux-arm-kernel@...ts.infradead.org, linux-phy@...ts.infradead.org, Marek
Vasut <marex@...x.de>, Kishon Vijay Abraham I <kishon@...nel.org>, Conor
Dooley <conor+dt@...nel.org>, Fabio Estevam <festevam@...il.com>,
Pengutronix Kernel Team <kernel@...gutronix.de>, Will Deacon
<will@...nel.org>, Rob Herring <robh@...nel.org>, imx@...ts.linux.dev,
Sascha Hauer <s.hauer@...gutronix.de>, aford@...conembedded.com,
linux-kernel@...r.kernel.org, Vinod Koul <vkoul@...nel.org>, Krzysztof
Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Catalin Marinas
<catalin.marinas@....com>, Shawn Guo <shawnguo@...nel.org>,
devicetree@...r.kernel.org, Lucas Stach <l.stach@...gutronix.de>
Subject: Re: [PATCH V6 5/6] arm64: dts: imx8mp: add HDMI display pipeline
On Tue, 27 Feb 2024 07:51:58 -0600
Adam Ford <aford173@...il.com> wrote:
> On Tue, Feb 27, 2024 at 2:33 AM Marco Felsch <m.felsch@...gutronix.de> wrote:
> >
> > Hi Adam,
> >
> > thanks a lot for pushing this topic.
> >
> > On 24-02-26, Adam Ford wrote:
> > > From: Lucas Stach <l.stach@...gutronix.de>
> > >
> > > This adds the DT nodes for all the peripherals that make up the
> > > HDMI display pipeline.
> > >
> > > Signed-off-by: Lucas Stach <l.stach@...gutronix.de>
> > > Signed-off-by: Adam Ford <aford173@...il.com>
> > > Tested-by: Marek Vasut <marex@...x.de>
> > > Tested-by: Luca Ceresoli <luca.ceresoli@...tlin.com>
> > > ---
> > > V6: Make LCDIF3 disabled by default
> > >
> > > V5: No change
> > >
> > > V3: Re-ordered the HDMI parts to properly come after irqstree_hdmi
> > > inside AIPS4. Change size of LCDIF3 and PVI to match TRM sizes
> > > of 4KB.
> > >
> > > V2: I took this from Lucas' original submission with the following:
> > > Removed extra clock from HDMI-TX since it is now part of the
> > > power domain
> > > Added interrupt-parent to PVI
> > > Changed the name of the HDMI tranmitter to fsl,imx8mp-hdmi-tx
> > > Added ports to HDMI-tx
> > > ---
> > > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 95 +++++++++++++++++++++++
> > > 1 file changed, 95 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > index 18bfa7d9aa7f..637b0265b0f1 100644
> > > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > > @@ -1940,6 +1940,101 @@ irqsteer_hdmi: interrupt-controller@...c2000 {
> > > clock-names = "ipg";
> > > power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_IRQSTEER>;
> > > };
> > > +
> > > + hdmi_pvi: display-bridge@...c4000 {
> > > + compatible = "fsl,imx8mp-hdmi-pvi";
> > > + reg = <0x32fc4000 0x1000>;
> > > + interrupt-parent = <&irqsteer_hdmi>;
> > > + interrupts = <12>;
> > > + power-domains = <&hdmi_blk_ctrl IMX8MP_HDMIBLK_PD_PVI>;
> >
> > this node should be 'status = "disabled";' as reported by Luca else this
> > node will EPROBE_DEFER. With that beeing fixed you can add my:
>
> sorry I missed that one...and I though I was done...sigh. I hope it's
> not too late to get this into the next release.
> >
> > Tested-by: Marco Felsch <m.felsch@...gutronix.de>
> >
>
> I'll push a V7 tonight and add your tested-by. Thanks for testing.
And with that fixed you can add to v7:
Reviewed-by: Luca Ceresoli <luca.ceresoli@...tlin.com>
Luca
--
Luca Ceresoli, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Powered by blists - more mailing lists