[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Zd4bLZb2z4TEoR1a@lizhi-Precision-Tower-5810>
Date: Tue, 27 Feb 2024 12:26:05 -0500
From: Frank Li <Frank.li@....com>
To: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Cc: Jingoo Han <jingoohan1@...il.com>,
Gustavo Pimentel <gustavo.pimentel@...opsys.com>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof Wilczyński <kw@...ux.com>,
Rob Herring <robh@...nel.org>, Bjorn Helgaas <bhelgaas@...gle.com>,
Marek Vasut <marek.vasut+renesas@...il.com>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Kishon Vijay Abraham I <kishon@...com>,
Vidya Sagar <vidyas@...dia.com>,
Vignesh Raghavendra <vigneshr@...com>,
Richard Zhu <hongxing.zhu@....com>,
Lucas Stach <l.stach@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Minghuan Lian <minghuan.Lian@....com>,
Mingkai Hu <mingkai.hu@....com>, Roy Zang <roy.zang@....com>,
Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>,
Masami Hiramatsu <mhiramat@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-renesas-soc@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-tegra@...r.kernel.org, linux-omap@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linuxppc-dev@...ts.ozlabs.org,
Niklas Cassel <cassel@...nel.org>
Subject: Re: [PATCH v8 08/10] PCI: dwc: ep: Add a generic
dw_pcie_ep_linkdown() API to handle LINK_DOWN event
On Tue, Feb 27, 2024 at 06:00:24PM +0530, Manivannan Sadhasivam wrote:
> On Mon, Feb 26, 2024 at 12:18:18PM -0500, Frank Li wrote:
> > On Sat, Feb 24, 2024 at 12:24:14PM +0530, Manivannan Sadhasivam wrote:
> > > The PCIe link can go to LINK_DOWN state in one of the following scenarios:
> > >
> > > 1. Fundamental (PERST#)/hot/warm reset
> > > 2. Link transition from L2/L3 to L0
> >
> > From L0 to L2/l3
> >
>
> I don't understand what you mean here. Link down won't happen while moving from
> L0 to L2/L3, it is the opposite.
Strange, why there are not linkdown from L0 to L2/l3. But have linkdown
from L2/l3 to L0? when linkup happen? Any document show these?
Frank
>
> > >
> > > In those cases, LINK_DOWN causes some non-sticky DWC registers to loose the
> > > state (like REBAR, PTM_CAP etc...). So the drivers need to reinitialize
> > > them to function properly once the link comes back again.
> > >
> > > This is not a problem for drivers supporting PERST# IRQ, since they can
> > > reinitialize the registers in the PERST# IRQ callback. But for the drivers
> > > not supporting PERST#, there is no way they can reinitialize the registers
> > > other than relying on LINK_DOWN IRQ received when the link goes down. So
> > > let's add a DWC generic API dw_pcie_ep_linkdown() that reinitializes the
> > > non-sticky registers and also notifies the EPF drivers about link going
> > > down.
> > >
> > > This API can also be used by the drivers supporting PERST# to handle the
> > > scenario (2) mentioned above.
> > >
> > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
> > > ---
> > > drivers/pci/controller/dwc/pcie-designware-ep.c | 111 ++++++++++++++----------
> > > drivers/pci/controller/dwc/pcie-designware.h | 5 ++
> > > 2 files changed, 72 insertions(+), 44 deletions(-)
> > >
> > > diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > index 278bdc9b2269..fed4c2936c78 100644
> > > --- a/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
> > > @@ -14,14 +14,6 @@
> > > #include <linux/pci-epc.h>
> > > #include <linux/pci-epf.h>
> > >
> > > -void dw_pcie_ep_linkup(struct dw_pcie_ep *ep)
> > > -{
> > > - struct pci_epc *epc = ep->epc;
> > > -
> > > - pci_epc_linkup(epc);
> > > -}
> > > -EXPORT_SYMBOL_GPL(dw_pcie_ep_linkup);
> > > -
> >
> > No sure why git remove this block and add these back.
> >
>
> Because, we are adding dw_pcie_ep_linkdown() API way below and it makes sense to
> move this API also to keep it ordered. Maybe I should've described it in commit
> message.
>
> - Mani
>
> >
> > > void dw_pcie_ep_init_notify(struct dw_pcie_ep *ep)
> > > {
> > > struct pci_epc *epc = ep->epc;
> > > @@ -603,19 +595,56 @@ static unsigned int dw_pcie_ep_find_ext_capability(struct dw_pcie *pci, int cap)
> > > return 0;
> > > }
> > >
> > > +static void dw_pcie_ep_init_non_sticky_registers(struct dw_pcie *pci)
> > > +{
> > > + unsigned int offset, ptm_cap_base;
> > > + unsigned int nbars;
> > > + u32 reg, i;
> > > +
> > > + offset = dw_pcie_ep_find_ext_capability(pci, PCI_EXT_CAP_ID_REBAR);
> > > + ptm_cap_base = dw_pcie_ep_find_ext_capability(pci, PCI_EXT_CAP_ID_PTM);
> > > +
> > > + dw_pcie_dbi_ro_wr_en(pci);
> > > +
> > > + if (offset) {
> > > + reg = dw_pcie_readl_dbi(pci, offset + PCI_REBAR_CTRL);
> > > + nbars = (reg & PCI_REBAR_CTRL_NBAR_MASK) >>
> > > + PCI_REBAR_CTRL_NBAR_SHIFT;
> > > +
> > > + for (i = 0; i < nbars; i++, offset += PCI_REBAR_CTRL)
> > > + dw_pcie_writel_dbi(pci, offset + PCI_REBAR_CAP, 0x0);
> > > + }
> > > +
> > > + /*
> > > + * PTM responder capability can be disabled only after disabling
> > > + * PTM root capability.
> > > + */
> > > + if (ptm_cap_base) {
> > > + dw_pcie_dbi_ro_wr_en(pci);
> > > + reg = dw_pcie_readl_dbi(pci, ptm_cap_base + PCI_PTM_CAP);
> > > + reg &= ~PCI_PTM_CAP_ROOT;
> > > + dw_pcie_writel_dbi(pci, ptm_cap_base + PCI_PTM_CAP, reg);
> > > +
> > > + reg = dw_pcie_readl_dbi(pci, ptm_cap_base + PCI_PTM_CAP);
> > > + reg &= ~(PCI_PTM_CAP_RES | PCI_PTM_GRANULARITY_MASK);
> > > + dw_pcie_writel_dbi(pci, ptm_cap_base + PCI_PTM_CAP, reg);
> > > + dw_pcie_dbi_ro_wr_dis(pci);
> > > + }
> > > +
> > > + dw_pcie_setup(pci);
> > > + dw_pcie_dbi_ro_wr_dis(pci);
> > > +}
> > > +
> > > int dw_pcie_ep_init_registers(struct dw_pcie_ep *ep)
> > > {
> > > struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > struct dw_pcie_ep_func *ep_func;
> > > struct device *dev = pci->dev;
> > > struct pci_epc *epc = ep->epc;
> > > - unsigned int offset, ptm_cap_base;
> > > - unsigned int nbars;
> > > u8 hdr_type;
> > > u8 func_no;
> > > - int i, ret;
> > > void *addr;
> > > - u32 reg;
> > > + int ret;
> > >
> > > hdr_type = dw_pcie_readb_dbi(pci, PCI_HEADER_TYPE) &
> > > PCI_HEADER_TYPE_MASK;
> > > @@ -678,38 +707,7 @@ int dw_pcie_ep_init_registers(struct dw_pcie_ep *ep)
> > > if (ep->ops->init)
> > > ep->ops->init(ep);
> > >
> > > - offset = dw_pcie_ep_find_ext_capability(pci, PCI_EXT_CAP_ID_REBAR);
> > > - ptm_cap_base = dw_pcie_ep_find_ext_capability(pci, PCI_EXT_CAP_ID_PTM);
> > > -
> > > - dw_pcie_dbi_ro_wr_en(pci);
> > > -
> > > - if (offset) {
> > > - reg = dw_pcie_readl_dbi(pci, offset + PCI_REBAR_CTRL);
> > > - nbars = (reg & PCI_REBAR_CTRL_NBAR_MASK) >>
> > > - PCI_REBAR_CTRL_NBAR_SHIFT;
> > > -
> > > - for (i = 0; i < nbars; i++, offset += PCI_REBAR_CTRL)
> > > - dw_pcie_writel_dbi(pci, offset + PCI_REBAR_CAP, 0x0);
> > > - }
> > > -
> > > - /*
> > > - * PTM responder capability can be disabled only after disabling
> > > - * PTM root capability.
> > > - */
> > > - if (ptm_cap_base) {
> > > - dw_pcie_dbi_ro_wr_en(pci);
> > > - reg = dw_pcie_readl_dbi(pci, ptm_cap_base + PCI_PTM_CAP);
> > > - reg &= ~PCI_PTM_CAP_ROOT;
> > > - dw_pcie_writel_dbi(pci, ptm_cap_base + PCI_PTM_CAP, reg);
> > > -
> > > - reg = dw_pcie_readl_dbi(pci, ptm_cap_base + PCI_PTM_CAP);
> > > - reg &= ~(PCI_PTM_CAP_RES | PCI_PTM_GRANULARITY_MASK);
> > > - dw_pcie_writel_dbi(pci, ptm_cap_base + PCI_PTM_CAP, reg);
> > > - dw_pcie_dbi_ro_wr_dis(pci);
> > > - }
> > > -
> > > - dw_pcie_setup(pci);
> > > - dw_pcie_dbi_ro_wr_dis(pci);
> > > + dw_pcie_ep_init_non_sticky_registers(pci);
> > >
> > > return 0;
> > >
> > > @@ -720,6 +718,31 @@ int dw_pcie_ep_init_registers(struct dw_pcie_ep *ep)
> > > }
> > > EXPORT_SYMBOL_GPL(dw_pcie_ep_init_registers);
> > >
> > > +void dw_pcie_ep_linkup(struct dw_pcie_ep *ep)
> > > +{
> > > + struct pci_epc *epc = ep->epc;
> > > +
> > > + pci_epc_linkup(epc);
> > > +}
> > > +EXPORT_SYMBOL_GPL(dw_pcie_ep_linkup);
> > > +
> > > +void dw_pcie_ep_linkdown(struct dw_pcie_ep *ep)
> > > +{
> > > + struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> > > + struct pci_epc *epc = ep->epc;
> > > +
> > > + /*
> > > + * Initialize the non-sticky DWC registers as they would've reset post
> > > + * LINK_DOWN. This is specifically needed for drivers not supporting
> > > + * PERST# as they have no way to reinitialize the registers before the
> > > + * link comes back again.
> > > + */
> > > + dw_pcie_ep_init_non_sticky_registers(pci);
> > > +
> > > + pci_epc_linkdown(epc);
> > > +}
> > > +EXPORT_SYMBOL_GPL(dw_pcie_ep_linkdown);
> > > +
> > > int dw_pcie_ep_init(struct dw_pcie_ep *ep)
> > > {
> > > int ret;
> > > diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> > > index f8e5431a207b..152969545b0a 100644
> > > --- a/drivers/pci/controller/dwc/pcie-designware.h
> > > +++ b/drivers/pci/controller/dwc/pcie-designware.h
> > > @@ -668,6 +668,7 @@ static inline void __iomem *dw_pcie_own_conf_map_bus(struct pci_bus *bus,
> > >
> > > #ifdef CONFIG_PCIE_DW_EP
> > > void dw_pcie_ep_linkup(struct dw_pcie_ep *ep);
> > > +void dw_pcie_ep_linkdown(struct dw_pcie_ep *ep);
> > > int dw_pcie_ep_init(struct dw_pcie_ep *ep);
> > > int dw_pcie_ep_init_registers(struct dw_pcie_ep *ep);
> > > void dw_pcie_ep_init_notify(struct dw_pcie_ep *ep);
> > > @@ -688,6 +689,10 @@ static inline void dw_pcie_ep_linkup(struct dw_pcie_ep *ep)
> > > {
> > > }
> > >
> > > +static inline void dw_pcie_ep_linkdown(struct dw_pcie_ep *ep)
> > > +{
> > > +}
> > > +
> > > static inline int dw_pcie_ep_init(struct dw_pcie_ep *ep)
> > > {
> > > return 0;
> > >
> > > --
> > > 2.25.1
> > >
>
> --
> மணிவண்ணன் சதாசிவம்
Powered by blists - more mailing lists