| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240227172852.2386358-7-tj@kernel.org>
Date: Tue, 27 Feb 2024 07:28:17 -1000
From: Tejun Heo <tj@...nel.org>
To: jiangshanlai@...il.com
Cc: torvalds@...ux-foundation.org,
linux-kernel@...r.kernel.org,
allen.lkml@...il.com,
kernel-team@...a.com,
boqun.feng@...il.com,
tglx@...utronix.de,
peterz@...radead.org,
romain.perier@...il.com,
mingo@...nel.org,
Tejun Heo <tj@...nel.org>
Subject: [PATCH 6/6] r8152: Convert from tasklet to BH workqueue
tasklet is being replaced by BH workqueue. No noticeable behavior or
performance changes are expected. The following is how the two APIs map:
- tasklet_setup/init() -> INIT_WORK()
- tasklet_schedule() -> queue_work(system_bh_wq, ...)
- tasklet_hi_schedule() -> queue_work(system_bh_highpri_wq, ...)
- tasklet_disable_nosync() -> disable_work()
- tasklet_disable[_in_atomic]() -> disable_work_sync()
- tasklet_enable() -> enable_work() + queue_work()
- tasklet_kill() -> cancel_work_sync()
Note that unlike tasklet_enable(), enable_work() doesn't queue the work item
automatically according to whether the work item was queued while disabled.
While the caller can track this separately, unconditionally scheduling the
work item after enable_work() returns %true should work for most users.
r8152 conversion has been tested by repeatedly forcing the device to go
through resets using usbreset under iperf3 generated traffic.
Signed-off-by: Tejun Heo <tj@...nel.org>
---
drivers/net/usb/r8152.c | 44 ++++++++++++++++++++++-------------------
1 file changed, 24 insertions(+), 20 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 9bf2140fd0a1..24e284b9eb38 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -882,7 +882,7 @@ struct r8152 {
#ifdef CONFIG_PM_SLEEP
struct notifier_block pm_notifier;
#endif
- struct tasklet_struct tx_tl;
+ struct work_struct tx_work;
struct rtl_ops {
void (*init)(struct r8152 *tp);
@@ -1948,7 +1948,7 @@ static void write_bulk_callback(struct urb *urb)
return;
if (!skb_queue_empty(&tp->tx_queue))
- tasklet_schedule(&tp->tx_tl);
+ queue_work(system_bh_wq, &tp->tx_work);
}
static void intr_callback(struct urb *urb)
@@ -2746,9 +2746,9 @@ static void tx_bottom(struct r8152 *tp)
} while (res == 0);
}
-static void bottom_half(struct tasklet_struct *t)
+static void bottom_half(struct work_struct *work)
{
- struct r8152 *tp = from_tasklet(tp, t, tx_tl);
+ struct r8152 *tp = container_of(work, struct r8152, tx_work);
if (test_bit(RTL8152_INACCESSIBLE, &tp->flags))
return;
@@ -2942,7 +2942,7 @@ static netdev_tx_t rtl8152_start_xmit(struct sk_buff *skb,
schedule_delayed_work(&tp->schedule, 0);
} else {
usb_mark_last_busy(tp->udev);
- tasklet_schedule(&tp->tx_tl);
+ queue_work(system_bh_wq, &tp->tx_work);
}
} else if (skb_queue_len(&tp->tx_queue) > tp->tx_qlen) {
netif_stop_queue(netdev);
@@ -6824,11 +6824,12 @@ static void set_carrier(struct r8152 *tp)
} else {
if (netif_carrier_ok(netdev)) {
netif_carrier_off(netdev);
- tasklet_disable(&tp->tx_tl);
+ disable_work_sync(&tp->tx_work);
napi_disable(napi);
tp->rtl_ops.disable(tp);
napi_enable(napi);
- tasklet_enable(&tp->tx_tl);
+ enable_work(&tp->tx_work);
+ queue_work(system_bh_wq, &tp->tx_work);
netif_info(tp, link, netdev, "carrier off\n");
}
}
@@ -6864,7 +6865,7 @@ static void rtl_work_func_t(struct work_struct *work)
/* don't schedule tasket before linking */
if (test_and_clear_bit(SCHEDULE_TASKLET, &tp->flags) &&
netif_carrier_ok(tp->netdev))
- tasklet_schedule(&tp->tx_tl);
+ queue_work(system_bh_wq, &tp->tx_work);
if (test_and_clear_bit(RX_EPROTO, &tp->flags) &&
!list_empty(&tp->rx_done))
@@ -6971,7 +6972,7 @@ static int rtl8152_open(struct net_device *netdev)
goto out_unlock;
}
napi_enable(&tp->napi);
- tasklet_enable(&tp->tx_tl);
+ enable_work(&tp->tx_work);
mutex_unlock(&tp->control);
@@ -6999,7 +7000,7 @@ static int rtl8152_close(struct net_device *netdev)
#ifdef CONFIG_PM_SLEEP
unregister_pm_notifier(&tp->pm_notifier);
#endif
- tasklet_disable(&tp->tx_tl);
+ disable_work_sync(&tp->tx_work);
clear_bit(WORK_ENABLE, &tp->flags);
usb_kill_urb(tp->intr_urb);
cancel_delayed_work_sync(&tp->schedule);
@@ -8421,7 +8422,7 @@ static int rtl8152_pre_reset(struct usb_interface *intf)
return 0;
netif_stop_queue(netdev);
- tasklet_disable(&tp->tx_tl);
+ disable_work_sync(&tp->tx_work);
clear_bit(WORK_ENABLE, &tp->flags);
usb_kill_urb(tp->intr_urb);
cancel_delayed_work_sync(&tp->schedule);
@@ -8466,7 +8467,8 @@ static int rtl8152_post_reset(struct usb_interface *intf)
}
napi_enable(&tp->napi);
- tasklet_enable(&tp->tx_tl);
+ enable_work(&tp->tx_work);
+ queue_work(system_bh_wq, &tp->tx_work);
netif_wake_queue(netdev);
usb_submit_urb(tp->intr_urb, GFP_KERNEL);
@@ -8625,12 +8627,13 @@ static int rtl8152_system_suspend(struct r8152 *tp)
clear_bit(WORK_ENABLE, &tp->flags);
usb_kill_urb(tp->intr_urb);
- tasklet_disable(&tp->tx_tl);
+ disable_work_sync(&tp->tx_work);
napi_disable(napi);
cancel_delayed_work_sync(&tp->schedule);
tp->rtl_ops.down(tp);
napi_enable(napi);
- tasklet_enable(&tp->tx_tl);
+ enable_work(&tp->tx_work);
+ queue_work(system_bh_wq, &tp->tx_work);
}
return 0;
@@ -9387,11 +9390,12 @@ static int rtl8152_change_mtu(struct net_device *dev, int new_mtu)
if (netif_carrier_ok(dev)) {
netif_stop_queue(dev);
napi_disable(&tp->napi);
- tasklet_disable(&tp->tx_tl);
+ disable_work_sync(&tp->tx_work);
tp->rtl_ops.disable(tp);
tp->rtl_ops.enable(tp);
rtl_start_rx(tp);
- tasklet_enable(&tp->tx_tl);
+ enable_work(&tp->tx_work);
+ queue_work(system_bh_wq, &tp->tx_work);
napi_enable(&tp->napi);
rtl8152_set_rx_mode(dev);
netif_wake_queue(dev);
@@ -9819,8 +9823,8 @@ static int rtl8152_probe_once(struct usb_interface *intf,
mutex_init(&tp->control);
INIT_DELAYED_WORK(&tp->schedule, rtl_work_func_t);
INIT_DELAYED_WORK(&tp->hw_phy_work, rtl_hw_phy_work_func_t);
- tasklet_setup(&tp->tx_tl, bottom_half);
- tasklet_disable(&tp->tx_tl);
+ INIT_WORK(&tp->tx_work, bottom_half);
+ disable_work(&tp->tx_work);
netdev->netdev_ops = &rtl8152_netdev_ops;
netdev->watchdog_timeo = RTL8152_TX_TIMEOUT;
@@ -9954,7 +9958,7 @@ static int rtl8152_probe_once(struct usb_interface *intf,
unregister_netdev(netdev);
out1:
- tasklet_kill(&tp->tx_tl);
+ cancel_work_sync(&tp->tx_work);
cancel_delayed_work_sync(&tp->hw_phy_work);
if (tp->rtl_ops.unload)
tp->rtl_ops.unload(tp);
@@ -10010,7 +10014,7 @@ static void rtl8152_disconnect(struct usb_interface *intf)
rtl_set_unplug(tp);
unregister_netdev(tp->netdev);
- tasklet_kill(&tp->tx_tl);
+ cancel_work_sync(&tp->tx_work);
cancel_delayed_work_sync(&tp->hw_phy_work);
if (tp->rtl_ops.unload)
tp->rtl_ops.unload(tp);
--
2.43.2
Powered by blists - more mailing lists