[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240227201807.GA3552737@hu-bjorande-lv.qualcomm.com>
Date: Tue, 27 Feb 2024 12:18:07 -0800
From: Bjorn Andersson <quic_bjorande@...cinc.com>
To: Abel Vesa <abel.vesa@...aro.org>
CC: Rob Clark <robdclark@...il.com>,
Abhinav Kumar
<quic_abhinavk@...cinc.com>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
Sean Paul <sean@...rly.run>,
Marijn Suijten <marijn.suijten@...ainline.org>,
David Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>,
"Maarten
Lankhorst" <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard
<mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
Rob Herring
<robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Kuogee Hsieh <quic_khsieh@...cinc.com>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio
<konrad.dybcio@...aro.org>,
Johan Hovold <johan@...nel.org>, <linux-arm-msm@...r.kernel.org>,
<dri-devel@...ts.freedesktop.org>, <freedreno@...ts.freedesktop.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 2/3] drm/msm/dp: Add support for setting the eDP mode
from devicetree
On Thu, Feb 22, 2024 at 05:55:07PM +0200, Abel Vesa wrote:
> Instead of relying on different compatibles for eDP and DP, use
> the is-edp property from DT to figure out the connector type and
> then pass on that information to the PHY.
>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
> Signed-off-by: Abel Vesa <abel.vesa@...aro.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@...cinc.com>
Regards,
Bjorn
> ---
> drivers/gpu/drm/msm/dp/dp_ctrl.c | 11 +++++++++++
> drivers/gpu/drm/msm/dp/dp_ctrl.h | 1 +
> drivers/gpu/drm/msm/dp/dp_display.c | 17 ++++++++++++++---
> 3 files changed, 26 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.c b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> index 320f17fce9a6..bd81cc6bd5e3 100644
> --- a/drivers/gpu/drm/msm/dp/dp_ctrl.c
> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.c
> @@ -1533,6 +1533,17 @@ void dp_ctrl_set_psr(struct dp_ctrl *dp_ctrl, bool enter)
> }
> }
>
> +int dp_ctrl_phy_set_mode(struct dp_ctrl *dp_ctrl, int submode)
> +{
> + struct dp_ctrl_private *ctrl;
> + struct phy *phy;
> +
> + ctrl = container_of(dp_ctrl, struct dp_ctrl_private, dp_ctrl);
> + phy = ctrl->phy;
> +
> + return phy_set_mode_ext(phy, PHY_MODE_DP, submode);
> +}
> +
> void dp_ctrl_phy_init(struct dp_ctrl *dp_ctrl)
> {
> struct dp_ctrl_private *ctrl;
> diff --git a/drivers/gpu/drm/msm/dp/dp_ctrl.h b/drivers/gpu/drm/msm/dp/dp_ctrl.h
> index fa014cee7e21..a10d1b19d172 100644
> --- a/drivers/gpu/drm/msm/dp/dp_ctrl.h
> +++ b/drivers/gpu/drm/msm/dp/dp_ctrl.h
> @@ -32,6 +32,7 @@ struct dp_ctrl *dp_ctrl_get(struct device *dev, struct dp_link *link,
> struct phy *phy);
>
> void dp_ctrl_reset_irq_ctrl(struct dp_ctrl *dp_ctrl, bool enable);
> +int dp_ctrl_phy_set_mode(struct dp_ctrl *dp_ctrl, int mode);
> void dp_ctrl_phy_init(struct dp_ctrl *dp_ctrl);
> void dp_ctrl_phy_exit(struct dp_ctrl *dp_ctrl);
> void dp_ctrl_irq_phy_exit(struct dp_ctrl *dp_ctrl);
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index e4433891becb..e01b41ad2e2a 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -1229,6 +1229,7 @@ static int dp_display_probe(struct platform_device *pdev)
> int rc = 0;
> struct dp_display_private *dp;
> const struct msm_dp_desc *desc;
> + bool is_edp;
>
> if (!pdev || !pdev->dev.of_node) {
> DRM_ERROR("pdev not found\n");
> @@ -1243,13 +1244,17 @@ static int dp_display_probe(struct platform_device *pdev)
> if (!desc)
> return -EINVAL;
>
> + is_edp = (desc->connector_type == DRM_MODE_CONNECTOR_eDP) ||
> + of_property_read_bool(pdev->dev.of_node, "is-edp");
> +
> dp->dp_display.pdev = pdev;
> dp->name = "drm_dp";
> dp->id = desc->id;
> - dp->dp_display.connector_type = desc->connector_type;
> + dp->dp_display.connector_type = is_edp ?
> + DRM_MODE_CONNECTOR_eDP :
> + DRM_MODE_CONNECTOR_DisplayPort;
> dp->wide_bus_en = desc->wide_bus_en;
> - dp->dp_display.is_edp =
> - (dp->dp_display.connector_type == DRM_MODE_CONNECTOR_eDP);
> + dp->dp_display.is_edp = is_edp;
>
> rc = dp_init_sub_modules(dp);
> if (rc) {
> @@ -1257,6 +1262,12 @@ static int dp_display_probe(struct platform_device *pdev)
> return -EPROBE_DEFER;
> }
>
> + rc = dp_ctrl_phy_set_mode(dp->ctrl, is_edp ? PHY_SUBMODE_EDP : PHY_SUBMODE_DP);
> + if (rc) {
> + DRM_ERROR("setting PHY submode failed\n");
> + goto err;
> + }
> +
> /* setup event q */
> mutex_init(&dp->event_mutex);
> init_waitqueue_head(&dp->event_q);
>
> --
> 2.34.1
>
Powered by blists - more mailing lists