lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <adb2956b-c600-4e86-8c56-87ceb70162d6@quicinc.com>
Date: Mon, 26 Feb 2024 19:19:05 -0800
From: Abhinav Kumar <quic_abhinavk@...cinc.com>
To: <quic_bjorande@...cinc.com>, Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...aro.org>,
        Ulf Hansson
	<ulf.hansson@...aro.org>,
        Stephen Boyd <swboyd@...omium.org>,
        Johan Hovold
	<johan+linaro@...nel.org>,
        Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
CC: <linux-arm-msm@...r.kernel.org>, <linux-pm@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>, Johan Hovold <johan@...nel.org>,
        <stable@...r.kernel.org>
Subject: Re: [PATCH] pmdomain: qcom: rpmhpd: Fix enabled_corner aggregation



On 2/26/2024 5:49 PM, Bjorn Andersson via B4 Relay wrote:
> From: Bjorn Andersson <quic_bjorande@...cinc.com>
> 
> Commit 'e3e56c050ab6 ("soc: qcom: rpmhpd: Make power_on actually enable
> the domain")' aimed to make sure that a power-domain that is being
> enabled without any particular performance-state requested will at least
> turn the rail on, to avoid filling DeviceTree with otherwise unnecessary
> required-opps properties.
> 
> But in the event that aggregation happens on a disabled power-domain, with
> an enabled peer without performance-state, both the local and peer
> corner are 0. The peer's enabled_corner is not considered, with the
> result that the underlying (shared) resource is disabled.
> 
> One case where this can be observed is when the display stack keeps mmcx
> enabled (but without a particular performance-state vote) in order to
> access registers and sync_state happens in the rpmhpd driver. As mmcx_ao
> is flushed the state of the peer (mmcx) is not considered and mmcx_ao
> ends up turning off "mmcx.lvl" underneath mmcx. This has been observed
> several times, but has been painted over in DeviceTree by adding an
> explicit vote for the lowest non-disabled performance-state.
> 
> Fixes: e3e56c050ab6 ("soc: qcom: rpmhpd: Make power_on actually enable the domain")
> Reported-by: Johan Hovold <johan@...nel.org>
> Closes: https://lore.kernel.org/linux-arm-msm/ZdMwZa98L23mu3u6@hovoldconsulting.com/
> Cc:  <stable@...r.kernel.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@...cinc.com>
> ---
> This issue is the root cause of a display regression on SC8280XP boards,
> resulting in the system often resetting during boot. It was exposed by
> the refactoring of the DisplayPort driver in v6.8-rc1.
> ---
>   drivers/pmdomain/qcom/rpmhpd.c | 7 +++++--
>   1 file changed, 5 insertions(+), 2 deletions(-)
> 

Reviewed-by: Abhinav Kumar <quic_abhinavk@...cinc.com>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ