| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240227005606.1107203-4-kcfeng0@nuvoton.com>
Date: Tue, 27 Feb 2024 08:56:06 +0800
From: baneric926@...il.com
To: jdelvare@...e.com,
linux@...ck-us.net,
robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org,
corbet@....net
Cc: linux-hwmon@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-doc@...r.kernel.org,
openbmc@...ts.ozlabs.org,
kwliu@...oton.com,
kcfeng0@...oton.com,
DELPHINE_CHIU@...ynn.com,
Bonnie_Lo@...ynn.com,
naresh.solanki@...ements.com,
billy_tsai@...eedtech.com
Subject: [PATCH v4 3/3] hwmon: Driver for Nuvoton NCT7363Y
From: Ban Feng <kcfeng0@...oton.com>
NCT7363Y is an I2C based hardware monitoring chip from Nuvoton.
Signed-off-by: Ban Feng <kcfeng0@...oton.com>
---
Documentation/hwmon/index.rst | 1 +
Documentation/hwmon/nct7363.rst | 33 +++
MAINTAINERS | 2 +
drivers/hwmon/Kconfig | 11 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/nct7363.c | 412 ++++++++++++++++++++++++++++++++
6 files changed, 460 insertions(+)
create mode 100644 Documentation/hwmon/nct7363.rst
create mode 100644 drivers/hwmon/nct7363.c
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index c7ed1f73ac06..302f954b45be 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -165,6 +165,7 @@ Hardware Monitoring Kernel Drivers
mp5990
nct6683
nct6775
+ nct7363
nct7802
nct7904
npcm750-pwm-fan
diff --git a/Documentation/hwmon/nct7363.rst b/Documentation/hwmon/nct7363.rst
new file mode 100644
index 000000000000..89699c95aa4b
--- /dev/null
+++ b/Documentation/hwmon/nct7363.rst
@@ -0,0 +1,33 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver nct7363
+=====================
+
+Supported chip:
+
+ * Nuvoton NCT7363Y
+
+ Prefix: nct7363
+
+ Addresses: I2C 0x20, 0x21, 0x22, 0x23
+
+Author: Ban Feng <kcfeng0@...oton.com>
+
+
+Description
+-----------
+
+The NCT7363Y is a Fan controller which provides up to 16 independent
+FAN input monitors, and up to 16 independent PWM output with SMBus interface.
+
+
+Sysfs entries
+-------------
+
+Currently, the driver supports the following features:
+
+======================= =======================================================
+fanX_input provide current fan rotation value in RPM
+
+pwmX get or set PWM fan control value.
+======================= =======================================================
diff --git a/MAINTAINERS b/MAINTAINERS
index 7b1efefed7c4..7ca66b713e30 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15089,6 +15089,8 @@ M: Ban Feng <kcfeng0@...oton.com>
L: linux-hwmon@...r.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/hwmon/nuvoton,nct7363.yaml
+F: Documentation/hwmon/nct7363.rst
+F: drivers/hwmon/nct7363.c
NETDEVSIM
M: Jakub Kicinski <kuba@...nel.org>
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index a608264da87d..a297b5409b04 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -1616,6 +1616,17 @@ config SENSORS_NCT6775_I2C
This driver can also be built as a module. If so, the module
will be called nct6775-i2c.
+config SENSORS_NCT7363
+ tristate "Nuvoton NCT7363Y"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ If you say yes here you get support for the Nuvoton NCT7363Y,
+ hardware monitoring chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called nct7363.
+
config SENSORS_NCT7802
tristate "Nuvoton NCT7802Y"
depends on I2C
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 47be39af5c03..d5e7531204df 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -167,6 +167,7 @@ obj-$(CONFIG_SENSORS_NCT6775_CORE) += nct6775-core.o
nct6775-objs := nct6775-platform.o
obj-$(CONFIG_SENSORS_NCT6775) += nct6775.o
obj-$(CONFIG_SENSORS_NCT6775_I2C) += nct6775-i2c.o
+obj-$(CONFIG_SENSORS_NCT7363) += nct7363.o
obj-$(CONFIG_SENSORS_NCT7802) += nct7802.o
obj-$(CONFIG_SENSORS_NCT7904) += nct7904.o
obj-$(CONFIG_SENSORS_NPCM7XX) += npcm750-pwm-fan.o
diff --git a/drivers/hwmon/nct7363.c b/drivers/hwmon/nct7363.c
new file mode 100644
index 000000000000..c79d3ca4f111
--- /dev/null
+++ b/drivers/hwmon/nct7363.c
@@ -0,0 +1,412 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2023 Nuvoton Technology corporation.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define NCT7363_REG_GPIO_0_3 0x20
+#define NCT7363_REG_GPIO_4_7 0x21
+#define NCT7363_REG_GPIO_10_13 0x22
+#define NCT7363_REG_GPIO_14_17 0x23
+#define NCT7363_REG_PWMEN_0_7 0x38
+#define NCT7363_REG_PWMEN_8_15 0x39
+#define NCT7363_REG_FANINEN_0_7 0x41
+#define NCT7363_REG_FANINEN_8_15 0x42
+#define NCT7363_REG_FANINX_HVAL(x) (0x48 + ((x) * 2))
+#define NCT7363_REG_FANINX_LVAL(x) (0x49 + ((x) * 2))
+#define NCT7363_REG_FSCPXDUTY(x) (0x90 + ((x) * 2))
+
+#define PWM_SEL(x) (BIT(0) << (((x) % 4) * 2))
+#define FANIN_SEL(x) (BIT(1) << (((x) % 4) * 2))
+
+#define NCT7363_FANINX_LVAL_MASK GENMASK(4, 0)
+#define NCT7363_FANIN_MASK GENMASK(12, 0)
+
+#define NCT7363_PWM_COUNT 16
+
+static inline unsigned long FAN_FROM_REG(u16 val)
+{
+ /* In case fan is stopped or divide by 0 */
+ if (val == NCT7363_FANIN_MASK || val == 0)
+ return 0;
+
+ return (1350000UL / val);
+}
+
+static const struct of_device_id nct7363_of_match[] = {
+ { .compatible = "nuvoton,nct7363" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, nct7363_of_match);
+
+struct nct7363_data {
+ struct regmap *regmap;
+ struct mutex lock; /* protect register access */
+
+ u16 fanin_mask;
+ u16 pwm_mask;
+};
+
+static int nct7363_read_fan(struct device *dev, u32 attr, int channel,
+ long *val)
+{
+ struct nct7363_data *data = dev_get_drvdata(dev);
+ unsigned int hi, lo;
+ u16 cnt, rpm;
+ int ret = 0;
+
+ switch (attr) {
+ case hwmon_fan_input:
+ /*
+ * High-byte register should be read first to latch
+ * synchronous low-byte value
+ */
+ ret = regmap_read(data->regmap,
+ NCT7363_REG_FANINX_HVAL(channel), &hi);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(data->regmap,
+ NCT7363_REG_FANINX_LVAL(channel), &lo);
+ if (ret)
+ return ret;
+
+ cnt = (hi << 5) | (lo & NCT7363_FANINX_LVAL_MASK);
+ rpm = FAN_FROM_REG(cnt);
+ *val = (long)rpm;
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static umode_t nct7363_fan_is_visible(const void *_data, u32 attr, int channel)
+{
+ const struct nct7363_data *data = _data;
+
+ switch (attr) {
+ case hwmon_fan_input:
+ if (data->fanin_mask & BIT(channel))
+ return 0444;
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int nct7363_read_pwm(struct device *dev, u32 attr, int channel,
+ long *val)
+{
+ struct nct7363_data *data = dev_get_drvdata(dev);
+ unsigned int regval;
+ u16 ret;
+
+ switch (attr) {
+ case hwmon_pwm_input:
+ ret = regmap_read(data->regmap,
+ NCT7363_REG_FSCPXDUTY(channel), ®val);
+ if (ret)
+ return ret;
+
+ *val = (long)regval;
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int nct7363_write_pwm(struct device *dev, u32 attr, int channel,
+ long val)
+{
+ struct nct7363_data *data = dev_get_drvdata(dev);
+ int ret;
+
+ switch (attr) {
+ case hwmon_pwm_input:
+ if (val < 0 || val > 255)
+ return -EINVAL;
+
+ mutex_lock(&data->lock);
+ ret = regmap_write(data->regmap,
+ NCT7363_REG_FSCPXDUTY(channel), val);
+ mutex_unlock(&data->lock);
+
+ return ret;
+
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static umode_t nct7363_pwm_is_visible(const void *_data, u32 attr, int channel)
+{
+ const struct nct7363_data *data = _data;
+
+ switch (attr) {
+ case hwmon_pwm_input:
+ if (data->pwm_mask & BIT(channel))
+ return 0644;
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int nct7363_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ switch (type) {
+ case hwmon_fan:
+ return nct7363_read_fan(dev, attr, channel, val);
+ case hwmon_pwm:
+ return nct7363_read_pwm(dev, attr, channel, val);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int nct7363_write(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long val)
+{
+ switch (type) {
+ case hwmon_pwm:
+ return nct7363_write_pwm(dev, attr, channel, val);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static umode_t nct7363_is_visible(const void *data,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ switch (type) {
+ case hwmon_fan:
+ return nct7363_fan_is_visible(data, attr, channel);
+ case hwmon_pwm:
+ return nct7363_pwm_is_visible(data, attr, channel);
+ default:
+ return 0;
+ }
+}
+
+static const struct hwmon_channel_info *nct7363_info[] = {
+ HWMON_CHANNEL_INFO(fan,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT,
+ HWMON_F_INPUT),
+ HWMON_CHANNEL_INFO(pwm,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT,
+ HWMON_PWM_INPUT),
+ NULL
+};
+
+static const struct hwmon_ops nct7363_hwmon_ops = {
+ .is_visible = nct7363_is_visible,
+ .read = nct7363_read,
+ .write = nct7363_write,
+};
+
+static const struct hwmon_chip_info nct7363_chip_info = {
+ .ops = &nct7363_hwmon_ops,
+ .info = nct7363_info,
+};
+
+static int nct7363_init_chip(struct nct7363_data *data)
+{
+ u8 i, gpio0_3 = 0, gpio4_7 = 0, gpio10_13 = 0, gpio14_17 = 0;
+ int ret;
+
+ for (i = 0; i < NCT7363_PWM_COUNT; i++) {
+ if (i < 4) {
+ if (data->pwm_mask & BIT(i))
+ gpio0_3 |= PWM_SEL(i);
+ if (data->fanin_mask & BIT(i))
+ gpio10_13 |= FANIN_SEL(i);
+ } else if (i < 8) {
+ if (data->pwm_mask & BIT(i))
+ gpio4_7 |= PWM_SEL(i);
+ if (data->fanin_mask & BIT(i))
+ gpio14_17 |= FANIN_SEL(i);
+ } else if (i < 12) {
+ if (data->pwm_mask & BIT(i))
+ gpio10_13 |= PWM_SEL(i);
+ if (data->fanin_mask & BIT(i))
+ gpio0_3 |= FANIN_SEL(i);
+ } else {
+ if (data->pwm_mask & BIT(i))
+ gpio14_17 |= PWM_SEL(i);
+ if (data->fanin_mask & BIT(i))
+ gpio4_7 |= FANIN_SEL(i);
+ }
+ }
+
+ /* Pin Function Configuration */
+ ret = regmap_write(data->regmap, NCT7363_REG_GPIO_0_3, gpio0_3);
+ if (ret < 0)
+ return ret;
+ ret = regmap_write(data->regmap, NCT7363_REG_GPIO_4_7, gpio4_7);
+ if (ret < 0)
+ return ret;
+ ret = regmap_write(data->regmap, NCT7363_REG_GPIO_10_13, gpio10_13);
+ if (ret < 0)
+ return ret;
+ ret = regmap_write(data->regmap, NCT7363_REG_GPIO_14_17, gpio14_17);
+ if (ret < 0)
+ return ret;
+
+ /* PWM and FANIN Monitoring Enable */
+ ret = regmap_write(data->regmap, NCT7363_REG_PWMEN_0_7,
+ data->pwm_mask & 0xff);
+ if (ret < 0)
+ return ret;
+ ret = regmap_write(data->regmap, NCT7363_REG_PWMEN_8_15,
+ (data->pwm_mask >> 8) & 0xff);
+ if (ret < 0)
+ return ret;
+ ret = regmap_write(data->regmap, NCT7363_REG_FANINEN_0_7,
+ data->fanin_mask & 0xff);
+ if (ret < 0)
+ return ret;
+ ret = regmap_write(data->regmap, NCT7363_REG_FANINEN_8_15,
+ (data->fanin_mask >> 8) & 0xff);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int nct7363_present_pwm_fanin(struct device *dev,
+ struct device_node *child,
+ struct nct7363_data *data)
+{
+ struct of_phandle_args args;
+ int ret, fanin_cnt;
+ u8 *fanin_ch;
+ u8 ch, index;
+
+ ret = of_parse_phandle_with_args(child, "pwms", "#pwm-cells",
+ 0, &args);
+ if (ret)
+ return ret;
+
+ data->pwm_mask |= BIT(args.args[0]);
+
+ fanin_cnt = of_property_count_u8_elems(child, "tach-ch");
+ if (fanin_cnt < 1)
+ return -EINVAL;
+
+ fanin_ch = devm_kcalloc(dev, fanin_cnt, sizeof(*fanin_ch), GFP_KERNEL);
+ if (!fanin_ch)
+ return -ENOMEM;
+
+ ret = of_property_read_u8_array(child, "tach-ch", fanin_ch, fanin_cnt);
+ if (ret)
+ return ret;
+
+ for (ch = 0; ch < fanin_cnt; ch++) {
+ index = fanin_ch[ch];
+ data->fanin_mask |= BIT(index);
+ }
+
+ return 0;
+}
+
+static const struct regmap_config nct7363_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static int nct7363_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct device_node *child;
+ struct nct7363_data *data;
+ struct device *hwmon_dev;
+ int ret;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->regmap = devm_regmap_init_i2c(client, &nct7363_regmap_config);
+ if (IS_ERR(data->regmap))
+ return PTR_ERR(data->regmap);
+
+ mutex_init(&data->lock);
+
+ for_each_child_of_node(dev->of_node, child) {
+ ret = nct7363_present_pwm_fanin(dev, child, data);
+ if (ret) {
+ of_node_put(child);
+ return ret;
+ }
+ }
+
+ /* Initialize the chip */
+ ret = nct7363_init_chip(data);
+ if (ret)
+ return ret;
+
+ hwmon_dev =
+ devm_hwmon_device_register_with_info(dev, client->name, data,
+ &nct7363_chip_info, NULL);
+ return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static struct i2c_driver nct7363_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = "nct7363",
+ .of_match_table = nct7363_of_match,
+ },
+ .probe = nct7363_probe,
+};
+
+module_i2c_driver(nct7363_driver);
+
+MODULE_AUTHOR("CW Ho <cwho@...oton.com>");
+MODULE_AUTHOR("Ban Feng <kcfeng0@...oton.com>");
+MODULE_DESCRIPTION("NCT7363 Hardware Monitoring Driver");
+MODULE_LICENSE("GPL");
--
2.34.1
Powered by blists - more mailing lists