linux-kernel - Re: [PATCH] pmdomain: qcom: rpmhpd: Fix enabled

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <Zd2oHl0cVQr3mhmd@hovoldconsulting.com>
Date: Tue, 27 Feb 2024 10:15:10 +0100
From: Johan Hovold <johan@...nel.org>
To: quic_bjorande@...cinc.com
Cc: Bjorn Andersson <andersson@...nel.org>,
	Konrad Dybcio <konrad.dybcio@...aro.org>,
	Ulf Hansson <ulf.hansson@...aro.org>,
	Stephen Boyd <swboyd@...omium.org>,
	Johan Hovold <johan+linaro@...nel.org>,
	Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
	linux-arm-msm@...r.kernel.org, linux-pm@...r.kernel.org,
	linux-kernel@...r.kernel.org, stable@...r.kernel.org
Subject: Re: [PATCH] pmdomain: qcom: rpmhpd: Fix enabled_corner aggregation

On Mon, Feb 26, 2024 at 05:49:57PM -0800, Bjorn Andersson via B4 Relay wrote:
> From: Bjorn Andersson <quic_bjorande@...cinc.com>
> 
> Commit 'e3e56c050ab6 ("soc: qcom: rpmhpd: Make power_on actually enable
> the domain")' aimed to make sure that a power-domain that is being
> enabled without any particular performance-state requested will at least
> turn the rail on, to avoid filling DeviceTree with otherwise unnecessary
> required-opps properties.
> 
> But in the event that aggregation happens on a disabled power-domain, with
> an enabled peer without performance-state, both the local and peer
> corner are 0. The peer's enabled_corner is not considered, with the
> result that the underlying (shared) resource is disabled.
> 
> One case where this can be observed is when the display stack keeps mmcx
> enabled (but without a particular performance-state vote) in order to
> access registers and sync_state happens in the rpmhpd driver. As mmcx_ao
> is flushed the state of the peer (mmcx) is not considered and mmcx_ao
> ends up turning off "mmcx.lvl" underneath mmcx. This has been observed
> several times, but has been painted over in DeviceTree by adding an
> explicit vote for the lowest non-disabled performance-state.
> 
> Fixes: e3e56c050ab6 ("soc: qcom: rpmhpd: Make power_on actually enable the domain")
> Reported-by: Johan Hovold <johan@...nel.org>
> Closes: https://lore.kernel.org/linux-arm-msm/ZdMwZa98L23mu3u6@hovoldconsulting.com/
> Cc:  <stable@...r.kernel.org>
> Signed-off-by: Bjorn Andersson <quic_bjorande@...cinc.com>
> ---
> This issue is the root cause of a display regression on SC8280XP boards,
> resulting in the system often resetting during boot. It was exposed by
> the refactoring of the DisplayPort driver in v6.8-rc1.

This fixes the hard resets I've been seeing since rc1 when initialising
the display subsystem of the Lenovo ThinkPad X13s at boot. With some
instrumentation added I can see the resets coinciding with the call to
rpmhpd_aggregate_corner() for 'mx_ao':

Tested-by: Johan Hovold <johan+linaro@...nel.org>