[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240228163304.GI9863@pendragon.ideasonboard.com>
Date: Wed, 28 Feb 2024 18:33:04 +0200
From: Laurent Pinchart <laurent.pinchart@...asonboard.com>
To: Adam Ford <aford173@...il.com>
Cc: dri-devel@...ts.freedesktop.org, linux-arm-kernel@...ts.infradead.org,
aford@...conembedded.com, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
Andrzej Hajda <andrzej.hajda@...el.com>,
Neil Armstrong <neil.armstrong@...aro.org>,
Robert Foss <rfoss@...nel.org>, Jonas Karlman <jonas@...boo.se>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>,
devicetree@...r.kernel.org, imx@...ts.linux.dev,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/2] arm64: dts: imx8mp-beacon-kit: Enable HDMI bridge HPD
Hi Adam,
Thank you for the patch.
On Wed, Feb 28, 2024 at 05:37:36AM -0600, Adam Ford wrote:
> The DSI to HDMI bridge supports hot-plut-detect, but the
> driver didn't previously support a shared IRQ GPIO. With
> the driver updated, the interrupt can be added to the bridge.
You can reflow the commit message to 72 columns.
> Signed-off-by: Adam Ford <aford173@...il.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@...asonboard.com>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
> index 8de4dd268908..d854c94ec997 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-beacon-kit.dts
> @@ -405,6 +405,8 @@ adv_bridge: hdmi@3d {
> compatible = "adi,adv7535";
> reg = <0x3d>, <0x3c>, <0x3e>, <0x3f>;
> reg-names = "main", "cec", "edid", "packet";
> + interrupt-parent = <&gpio4>;
> + interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
> adi,dsi-lanes = <4>;
> #sound-dai-cells = <0>;
>
--
Regards,
Laurent Pinchart
Powered by blists - more mailing lists