[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240228-mbly-gpio-v2-5-3ba757474006@bootlin.com>
Date: Wed, 28 Feb 2024 12:28:03 +0100
From: Théo Lebrun <theo.lebrun@...tlin.com>
To: Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Philipp Zabel <p.zabel@...gutronix.de>,
Thomas Bogendoerfer <tsbogend@...ha.franken.de>
Cc: linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mips@...r.kernel.org, Gregory CLEMENT <gregory.clement@...tlin.com>,
Vladimir Kondratiev <vladimir.kondratiev@...ileye.com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Tawfik Bayouk <tawfik.bayouk@...ileye.com>,
Théo Lebrun <theo.lebrun@...tlin.com>
Subject: [PATCH v2 05/30] gpio: nomadik: fix offset bug in nmk_pmx_set()
Previously, the statement looked like:
slpm[x] &= ~BIT(g->grp.pins[i]);
Where:
- slpm is a unsigned int pointer;
- g->grp.pins[i] is a pin number. It can grow to more than 32.
The expected shift amount is a pin bank offset.
This bug does not occur on every group or pin: the altsetting must be
NMK_GPIO_ALT_C and the pin must be 32 or above. It might have occured.
For example, in pinctrl-nomadik-db8500.c, pin group i2c3_c_2 has the
right altsetting and pins 229 and 230.
Fixes: dbfe8ca259e1 ("pinctrl/nomadik: implement pin multiplexing")
Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@...tlin.com>
---
drivers/pinctrl/nomadik/pinctrl-nomadik.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/nomadik/pinctrl-nomadik.c b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
index 7911353ac97d..4f7c4af4f93c 100644
--- a/drivers/pinctrl/nomadik/pinctrl-nomadik.c
+++ b/drivers/pinctrl/nomadik/pinctrl-nomadik.c
@@ -1579,8 +1579,10 @@ static int nmk_pmx_set(struct pinctrl_dev *pctldev, unsigned function,
* Then mask the pins that need to be sleeping now when we're
* switching to the ALT C function.
*/
- for (i = 0; i < g->grp.npins; i++)
- slpm[g->grp.pins[i] / NMK_GPIO_PER_CHIP] &= ~BIT(g->grp.pins[i]);
+ for (i = 0; i < g->grp.npins; i++) {
+ unsigned int bit = g->grp.pins[i] % NMK_GPIO_PER_CHIP;
+ slpm[g->grp.pins[i] / NMK_GPIO_PER_CHIP] &= ~BIT(bit);
+ }
nmk_gpio_glitch_slpm_init(slpm);
}
--
2.44.0
Powered by blists - more mailing lists