| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <6b6ce007-4527-494f-8d03-079f7bf139f9@paulmck-laptop>
Date: Wed, 28 Feb 2024 07:10:21 -0800
From: "Paul E. McKenney" <paulmck@...nel.org>
To: Toke Høiland-Jørgensen <toke@...hat.com>
Cc: Eric Dumazet <edumazet@...gle.com>, Yan Zhai <yan@...udflare.com>,
netdev@...r.kernel.org, "David S. Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Jiri Pirko <jiri@...nulli.us>, Simon Horman <horms@...nel.org>,
Daniel Borkmann <daniel@...earbox.net>,
Lorenzo Bianconi <lorenzo@...nel.org>,
Coco Li <lixiaoyan@...gle.com>, Wei Wang <weiwan@...gle.com>,
Alexander Duyck <alexanderduyck@...com>,
Hannes Frederic Sowa <hannes@...essinduktion.org>,
linux-kernel@...r.kernel.org, rcu@...r.kernel.org,
bpf@...r.kernel.org, kernel-team@...udflare.com
Subject: Re: [PATCH] net: raise RCU qs after each threaded NAPI poll
On Wed, Feb 28, 2024 at 12:50:53PM +0100, Toke Høiland-Jørgensen wrote:
> "Paul E. McKenney" <paulmck@...nel.org> writes:
>
> > On Tue, Feb 27, 2024 at 05:44:17PM +0100, Eric Dumazet wrote:
> >> On Tue, Feb 27, 2024 at 4:44 PM Yan Zhai <yan@...udflare.com> wrote:
> >> >
> >> > We noticed task RCUs being blocked when threaded NAPIs are very busy in
> >> > production: detaching any BPF tracing programs, i.e. removing a ftrace
> >> > trampoline, will simply block for very long in rcu_tasks_wait_gp. This
> >> > ranges from hundreds of seconds to even an hour, severely harming any
> >> > observability tools that rely on BPF tracing programs. It can be
> >> > easily reproduced locally with following setup:
> >> >
> >> > ip netns add test1
> >> > ip netns add test2
> >> >
> >> > ip -n test1 link add veth1 type veth peer name veth2 netns test2
> >> >
> >> > ip -n test1 link set veth1 up
> >> > ip -n test1 link set lo up
> >> > ip -n test2 link set veth2 up
> >> > ip -n test2 link set lo up
> >> >
> >> > ip -n test1 addr add 192.168.1.2/31 dev veth1
> >> > ip -n test1 addr add 1.1.1.1/32 dev lo
> >> > ip -n test2 addr add 192.168.1.3/31 dev veth2
> >> > ip -n test2 addr add 2.2.2.2/31 dev lo
> >> >
> >> > ip -n test1 route add default via 192.168.1.3
> >> > ip -n test2 route add default via 192.168.1.2
> >> >
> >> > for i in `seq 10 210`; do
> >> > for j in `seq 10 210`; do
> >> > ip netns exec test2 iptables -I INPUT -s 3.3.$i.$j -p udp --dport 5201
> >> > done
> >> > done
> >> >
> >> > ip netns exec test2 ethtool -K veth2 gro on
> >> > ip netns exec test2 bash -c 'echo 1 > /sys/class/net/veth2/threaded'
> >> > ip netns exec test1 ethtool -K veth1 tso off
> >> >
> >> > Then run an iperf3 client/server and a bpftrace script can trigger it:
> >> >
> >> > ip netns exec test2 iperf3 -s -B 2.2.2.2 >/dev/null&
> >> > ip netns exec test1 iperf3 -c 2.2.2.2 -B 1.1.1.1 -u -l 1500 -b 3g -t 100 >/dev/null&
> >> > bpftrace -e 'kfunc:__napi_poll{@...unt();} interval:s:1{exit();}'
> >> >
> >> > Above reproduce for net-next kernel with following RCU and preempt
> >> > configuraitons:
> >> >
> >> > # RCU Subsystem
> >> > CONFIG_TREE_RCU=y
> >> > CONFIG_PREEMPT_RCU=y
> >> > # CONFIG_RCU_EXPERT is not set
> >> > CONFIG_SRCU=y
> >> > CONFIG_TREE_SRCU=y
> >> > CONFIG_TASKS_RCU_GENERIC=y
> >> > CONFIG_TASKS_RCU=y
> >> > CONFIG_TASKS_RUDE_RCU=y
> >> > CONFIG_TASKS_TRACE_RCU=y
> >> > CONFIG_RCU_STALL_COMMON=y
> >> > CONFIG_RCU_NEED_SEGCBLIST=y
> >> > # end of RCU Subsystem
> >> > # RCU Debugging
> >> > # CONFIG_RCU_SCALE_TEST is not set
> >> > # CONFIG_RCU_TORTURE_TEST is not set
> >> > # CONFIG_RCU_REF_SCALE_TEST is not set
> >> > CONFIG_RCU_CPU_STALL_TIMEOUT=21
> >> > CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
> >> > # CONFIG_RCU_TRACE is not set
> >> > # CONFIG_RCU_EQS_DEBUG is not set
> >> > # end of RCU Debugging
> >> >
> >> > CONFIG_PREEMPT_BUILD=y
> >> > # CONFIG_PREEMPT_NONE is not set
> >> > CONFIG_PREEMPT_VOLUNTARY=y
> >> > # CONFIG_PREEMPT is not set
> >> > CONFIG_PREEMPT_COUNT=y
> >> > CONFIG_PREEMPTION=y
> >> > CONFIG_PREEMPT_DYNAMIC=y
> >> > CONFIG_PREEMPT_RCU=y
> >> > CONFIG_HAVE_PREEMPT_DYNAMIC=y
> >> > CONFIG_HAVE_PREEMPT_DYNAMIC_CALL=y
> >> > CONFIG_PREEMPT_NOTIFIERS=y
> >> > # CONFIG_DEBUG_PREEMPT is not set
> >> > # CONFIG_PREEMPT_TRACER is not set
> >> > # CONFIG_PREEMPTIRQ_DELAY_TEST is not set
> >> >
> >> > An interesting observation is that, while tasks RCUs are blocked,
> >> > related NAPI thread is still being scheduled (even across cores)
> >> > regularly. Looking at the gp conditions, I am inclining to cond_resched
> >> > after each __napi_poll being the problem: cond_resched enters the
> >> > scheduler with PREEMPT bit, which does not account as a gp for tasks
> >> > RCUs. Meanwhile, since the thread has been frequently resched, the
> >> > normal scheduling point (no PREEMPT bit, accounted as a task RCU gp)
> >> > seems to have very little chance to kick in. Given the nature of "busy
> >> > polling" program, such NAPI thread won't have task->nvcsw or task->on_rq
> >> > updated (other gp conditions), the result is that such NAPI thread is
> >> > put on RCU holdouts list for indefinitely long time.
> >> >
> >> > This is simply fixed by mirroring the ksoftirqd behavior: after
> >> > NAPI/softirq work, raise a RCU QS to help expedite the RCU period. No
> >> > more blocking afterwards for the same setup.
> >> >
> >> > Fixes: 29863d41bb6e ("net: implement threaded-able napi poll loop support")
> >> > Signed-off-by: Yan Zhai <yan@...udflare.com>
> >> > ---
> >> > net/core/dev.c | 4 ++++
> >> > 1 file changed, 4 insertions(+)
> >> >
> >> > diff --git a/net/core/dev.c b/net/core/dev.c
> >> > index 275fd5259a4a..6e41263ff5d3 100644
> >> > --- a/net/core/dev.c
> >> > +++ b/net/core/dev.c
> >> > @@ -6773,6 +6773,10 @@ static int napi_threaded_poll(void *data)
> >> > net_rps_action_and_irq_enable(sd);
> >> > }
> >> > skb_defer_free_flush(sd);
> >
> > Please put a comment here stating that RCU readers cannot cross
> > this point.
> >
> > I need to add lockdep to rcu_softirq_qs() to catch placing this in an
> > RCU read-side critical section. And a header comment noting that from
> > an RCU perspective, it acts as a momentary enabling of preemption.
>
> OK, so one question here: for XDP, we're basically treating
> local_bh_disable/enable() as the RCU critical section, cf the discussion
> we had a few years ago that led to this being documented[0]. So why is
> it OK to have the rcu_softirq_qs() inside the bh disable/enable pair,
> but not inside an rcu_read_lock() section?
In general, it is not OK. And it is not OK in this case if this happens
to be one of the local_bh_disable() regions that XDP is waiting on.
Except that that region ends right after the rcu_softirq_qs(), so that
should not be a problem.
But you are quite right, that is an accident waiting to happen, so it
would be better if the patch did something like this:
local_bh_enable();
if (!IS_ENABLED(CONFIG_PREEMPT_RT)) {
preempt_disable();
rcu_softirq_qs();
preempt_enable();
}
Though maybe something like this would be better:
local_bh_enable();
if (!IS_ENABLED(CONFIG_PREEMPT_RT))
rcu_softirq_qs_enable(local_bh_enable());
else
local_bh_enable();
A bit ugly, but it does allow exact checking of the rules and also
avoids extra overhead.
I could imagine pulling the CONFIG_PREEMPT_RT check into the body of
rcu_softirq_qs_enable().
But is there a better way?
> Also, looking at the patch in question:
>
> >> > + if (!IS_ENABLED(CONFIG_PREEMPT_RT))
> >> > + rcu_softirq_qs();
> >> > +
> >> > local_bh_enable();
>
> Why does that local_bh_enable() not accomplish the same thing as the qs?
In this case, because it does not create the appearance of a voluntary
context switch needed by RCU Tasks. So the wait for trampoline evacuation
could still take a very long time.
Thanx, Paul
> -Toke
>
> [0] https://lore.kernel.org/bpf/20210624160609.292325-6-toke@redhat.com/
>
Powered by blists - more mailing lists