linux-kernel - Re: [PATCH v2] gpio: 74x164: Enable output pins after registers are reset

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [day] [month] [year] [list]

Date: Thu, 29 Feb 2024 20:25:07 +0200
From: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To: Arturas Moskvinas <arturas.moskvinas@...il.com>
Cc: Bartosz Golaszewski <brgl@...ev.pl>, linus.walleij@...aro.org,
	u.kleine-koenig@...gutronix.de, linux-gpio@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] gpio: 74x164: Enable output pins after registers are
 reset

On Thu, Feb 29, 2024 at 07:24:09PM +0200, Arturas Moskvinas wrote:
> On 2/29/24 15:25, Bartosz Golaszewski wrote:
> > On Thu, Feb 29, 2024 at 1:23 PM Arturas Moskvinas
> > <arturas.moskvinas@...il.com>  wrote:
> > > Chip outputs are enabled[1] before actual reset is performed[2] which might
> > > cause pin output value to flip flop if previous pin value was set to 1
> > > in chip.
> > > Fix that behavior by making sure chip is fully reset before all outputs are
> > > enabled.
> > > 
> > > Bartosz, does this look better?
> > ... if previous pin value was set to 1 period
> Andriy, Bartosz, is commit message ok?

LGTM! Please, send a v3 with it.

-- 
With Best Regards,
Andy Shevchenko