| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240229203933.2861006-18-sashal@kernel.org>
Date: Thu, 29 Feb 2024 15:39:11 -0500
From: Sasha Levin <sashal@...nel.org>
To: linux-kernel@...r.kernel.org,
stable@...r.kernel.org
Cc: Rob Herring <robh@...nel.org>,
Andrew Jeffery <andrew@...econstruct.com.au>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Florian Fainelli <florian.fainelli@...adcom.com>,
Thierry Reding <treding@...dia.com>,
Arnd Bergmann <arnd@...db.de>,
Sasha Levin <sashal@...nel.org>,
tsahee@...apurnalabs.com,
atenart@...nel.org,
robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org,
joel@....id.au,
rjui@...adcom.com,
sbranden@...adcom.com,
andrew@...n.ch,
gregory.clement@...tlin.com,
sebastian.hesselbarth@...il.com,
j.neuschaefer@....net,
thierry.reding@...il.com,
jonathanh@...dia.com,
shawnguo@...nel.org,
mcoquelin.stm32@...il.com,
bcousson@...libre.com,
tony@...mide.com,
andre.przywara@....com,
hayashi.kunihiko@...ionext.com,
linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org,
linux-aspeed@...ts.ozlabs.org,
openbmc@...ts.ozlabs.org,
linux-tegra@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-omap@...r.kernel.org
Subject: [PATCH AUTOSEL 6.6 18/22] arm: dts: Fix dtc interrupt_provider warnings
From: Rob Herring <robh@...nel.org>
[ Upstream commit 96fd598e9c34cfa68402a4da3020c9236cfacf35 ]
The dtc interrupt_provider warning is off by default. Fix all the warnings
so it can be enabled.
Signed-off-by: Rob Herring <robh@...nel.org>
Reviewed-by: Andrew Jeffery <andrew@...econstruct.com.au>
Reviewed-by: Alexandre Torgue <alexandre.torgue@...s.st.com>
Acked-by: Florian Fainelli <florian.fainelli@...adcom.com> #Broadcom
Acked-by: Thierry Reding <treding@...dia.com>
Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-2-f2dee1292525@kernel.org
Signed-off-by: Arnd Bergmann <arnd@...db.de>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
arch/arm/boot/dts/amazon/alpine.dtsi | 1 -
arch/arm/boot/dts/aspeed/aspeed-g4.dtsi | 14 --------------
arch/arm/boot/dts/aspeed/aspeed-g5.dtsi | 15 +--------------
arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 18 ++----------------
arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi | 3 +++
arch/arm/boot/dts/broadcom/bcm-hr2.dtsi | 1 +
arch/arm/boot/dts/broadcom/bcm-nsp.dtsi | 2 ++
arch/arm/boot/dts/marvell/kirkwood-l-50.dts | 2 ++
arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi | 2 ++
.../boot/dts/nvidia/tegra30-apalis-v1.1.dtsi | 1 -
arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi | 1 -
arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi | 1 -
arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts | 3 ---
arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi | 2 +-
arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi | 1 -
arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi | 1 -
arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi | 1 -
.../dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi | 1 +
.../nxp/imx/imx6qdl-phytec-phycore-som.dtsi | 1 +
arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts | 1 +
.../boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts | 1 +
arch/arm/boot/dts/st/stm32429i-eval.dts | 1 -
arch/arm/boot/dts/st/stm32mp157c-dk2.dts | 1 -
.../boot/dts/ti/omap/am5729-beagleboneai.dts | 1 -
24 files changed, 18 insertions(+), 58 deletions(-)
diff --git a/arch/arm/boot/dts/amazon/alpine.dtsi b/arch/arm/boot/dts/amazon/alpine.dtsi
index ff68dfb4eb787..90bd12feac010 100644
--- a/arch/arm/boot/dts/amazon/alpine.dtsi
+++ b/arch/arm/boot/dts/amazon/alpine.dtsi
@@ -167,7 +167,6 @@ pcie@...00000 {
msix: msix@...00000 {
compatible = "al,alpine-msix";
reg = <0x0 0xfbe00000 0x0 0x100000>;
- interrupt-controller;
msi-controller;
al,msi-base-spi = <96>;
al,msi-num-spis = <64>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
index 530491ae5eb26..857cb26ed6d7e 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
@@ -466,7 +466,6 @@ i2c_ic: interrupt-controller@0 {
i2c0: i2c-bus@40 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x40 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
@@ -482,7 +481,6 @@ i2c0: i2c-bus@40 {
i2c1: i2c-bus@80 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x80 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
@@ -498,7 +496,6 @@ i2c1: i2c-bus@80 {
i2c2: i2c-bus@c0 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0xc0 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
@@ -515,7 +512,6 @@ i2c2: i2c-bus@c0 {
i2c3: i2c-bus@100 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x100 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
@@ -532,7 +528,6 @@ i2c3: i2c-bus@100 {
i2c4: i2c-bus@140 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x140 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
@@ -549,7 +544,6 @@ i2c4: i2c-bus@140 {
i2c5: i2c-bus@180 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x180 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
@@ -566,7 +560,6 @@ i2c5: i2c-bus@180 {
i2c6: i2c-bus@1c0 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x1c0 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
@@ -583,7 +576,6 @@ i2c6: i2c-bus@1c0 {
i2c7: i2c-bus@300 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x300 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
@@ -600,7 +592,6 @@ i2c7: i2c-bus@300 {
i2c8: i2c-bus@340 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x340 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
@@ -617,7 +608,6 @@ i2c8: i2c-bus@340 {
i2c9: i2c-bus@380 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x380 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
@@ -634,7 +624,6 @@ i2c9: i2c-bus@380 {
i2c10: i2c-bus@3c0 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x3c0 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
@@ -651,7 +640,6 @@ i2c10: i2c-bus@3c0 {
i2c11: i2c-bus@400 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x400 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
@@ -668,7 +656,6 @@ i2c11: i2c-bus@400 {
i2c12: i2c-bus@440 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x440 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
@@ -685,7 +672,6 @@ i2c12: i2c-bus@440 {
i2c13: i2c-bus@480 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x480 0x40>;
compatible = "aspeed,ast2400-i2c-bus";
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
index 04f98d1dbb97c..e6f3cf3c721e5 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
@@ -363,6 +363,7 @@ sgpio: sgpio@...80200 {
interrupts = <40>;
reg = <0x1e780200 0x0100>;
clocks = <&syscon ASPEED_CLK_APB>;
+ #interrupt-cells = <2>;
interrupt-controller;
bus-frequency = <12000000>;
pinctrl-names = "default";
@@ -594,7 +595,6 @@ i2c_ic: interrupt-controller@0 {
i2c0: i2c-bus@40 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x40 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
@@ -610,7 +610,6 @@ i2c0: i2c-bus@40 {
i2c1: i2c-bus@80 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x80 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
@@ -626,7 +625,6 @@ i2c1: i2c-bus@80 {
i2c2: i2c-bus@c0 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0xc0 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
@@ -643,7 +641,6 @@ i2c2: i2c-bus@c0 {
i2c3: i2c-bus@100 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x100 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
@@ -660,7 +657,6 @@ i2c3: i2c-bus@100 {
i2c4: i2c-bus@140 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x140 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
@@ -677,7 +673,6 @@ i2c4: i2c-bus@140 {
i2c5: i2c-bus@180 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x180 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
@@ -694,7 +689,6 @@ i2c5: i2c-bus@180 {
i2c6: i2c-bus@1c0 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x1c0 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
@@ -711,7 +705,6 @@ i2c6: i2c-bus@1c0 {
i2c7: i2c-bus@300 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x300 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
@@ -728,7 +721,6 @@ i2c7: i2c-bus@300 {
i2c8: i2c-bus@340 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x340 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
@@ -745,7 +737,6 @@ i2c8: i2c-bus@340 {
i2c9: i2c-bus@380 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x380 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
@@ -762,7 +753,6 @@ i2c9: i2c-bus@380 {
i2c10: i2c-bus@3c0 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x3c0 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
@@ -779,7 +769,6 @@ i2c10: i2c-bus@3c0 {
i2c11: i2c-bus@400 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x400 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
@@ -796,7 +785,6 @@ i2c11: i2c-bus@400 {
i2c12: i2c-bus@440 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x440 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
@@ -813,7 +801,6 @@ i2c12: i2c-bus@440 {
i2c13: i2c-bus@480 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x480 0x40>;
compatible = "aspeed,ast2500-i2c-bus";
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index c4d1faade8be3..29f94696d8b18 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -474,6 +474,7 @@ sgpiom0: sgpiom@...80500 {
reg = <0x1e780500 0x100>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&syscon ASPEED_CLK_APB2>;
+ #interrupt-cells = <2>;
interrupt-controller;
bus-frequency = <12000000>;
pinctrl-names = "default";
@@ -488,6 +489,7 @@ sgpiom1: sgpiom@...80600 {
reg = <0x1e780600 0x100>;
interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&syscon ASPEED_CLK_APB2>;
+ #interrupt-cells = <2>;
interrupt-controller;
bus-frequency = <12000000>;
pinctrl-names = "default";
@@ -902,7 +904,6 @@ &i2c {
i2c0: i2c-bus@80 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x80 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@@ -917,7 +918,6 @@ i2c0: i2c-bus@80 {
i2c1: i2c-bus@100 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x100 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@@ -932,7 +932,6 @@ i2c1: i2c-bus@100 {
i2c2: i2c-bus@180 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x180 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@@ -947,7 +946,6 @@ i2c2: i2c-bus@180 {
i2c3: i2c-bus@200 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x200 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@@ -962,7 +960,6 @@ i2c3: i2c-bus@200 {
i2c4: i2c-bus@280 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x280 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@@ -977,7 +974,6 @@ i2c4: i2c-bus@280 {
i2c5: i2c-bus@300 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x300 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@@ -992,7 +988,6 @@ i2c5: i2c-bus@300 {
i2c6: i2c-bus@380 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x380 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1007,7 +1002,6 @@ i2c6: i2c-bus@380 {
i2c7: i2c-bus@400 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x400 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1022,7 +1016,6 @@ i2c7: i2c-bus@400 {
i2c8: i2c-bus@480 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x480 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1037,7 +1030,6 @@ i2c8: i2c-bus@480 {
i2c9: i2c-bus@500 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x500 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1052,7 +1044,6 @@ i2c9: i2c-bus@500 {
i2c10: i2c-bus@580 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x580 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1067,7 +1058,6 @@ i2c10: i2c-bus@580 {
i2c11: i2c-bus@600 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x600 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1082,7 +1072,6 @@ i2c11: i2c-bus@600 {
i2c12: i2c-bus@680 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x680 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1097,7 +1086,6 @@ i2c12: i2c-bus@680 {
i2c13: i2c-bus@700 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x700 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1112,7 +1100,6 @@ i2c13: i2c-bus@700 {
i2c14: i2c-bus@780 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x780 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
@@ -1127,7 +1114,6 @@ i2c14: i2c-bus@780 {
i2c15: i2c-bus@800 {
#address-cells = <1>;
#size-cells = <0>;
- #interrupt-cells = <1>;
reg = <0x800 0x80>;
compatible = "aspeed,ast2600-i2c-bus";
clocks = <&syscon ASPEED_CLK_APB2>;
diff --git a/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
index f9f79ed825181..07ca0d993c9fd 100644
--- a/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-cygnus.dtsi
@@ -167,6 +167,7 @@ gpio_crmu: gpio@...4800 {
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
interrupt-parent = <&mailbox>;
interrupts = <0>;
};
@@ -247,6 +248,7 @@ gpio_ccm: gpio@...0a000 {
gpio-controller;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
+ #interrupt-cells = <2>;
};
i2c1: i2c@...0b000 {
@@ -518,6 +520,7 @@ gpio_asiu: gpio@...a5000 {
gpio-controller;
interrupt-controller;
+ #interrupt-cells = <2>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
gpio-ranges = <&pinctrl 0 42 1>,
<&pinctrl 1 44 3>,
diff --git a/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
index 788a6806191a3..75545b10ef2fa 100644
--- a/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-hr2.dtsi
@@ -200,6 +200,7 @@ gpiob: gpio@...00 {
gpio-controller;
ngpios = <4>;
interrupt-controller;
+ #interrupt-cells = <2>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
};
diff --git a/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
index 9d20ba3b1ffb1..6a4482c931674 100644
--- a/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/broadcom/bcm-nsp.dtsi
@@ -180,6 +180,7 @@ gpioa: gpio@20 {
gpio-controller;
ngpios = <32>;
interrupt-controller;
+ #interrupt-cells = <2>;
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
gpio-ranges = <&pinctrl 0 0 32>;
};
@@ -352,6 +353,7 @@ gpiob: gpio@...00 {
gpio-controller;
ngpios = <4>;
interrupt-controller;
+ #interrupt-cells = <2>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
};
diff --git a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
index dffb9f84e67c5..c841eb8e7fb1d 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts
@@ -65,6 +65,7 @@ i2c@...00 {
gpio2: gpio-expander@20 {
#gpio-cells = <2>;
#interrupt-cells = <2>;
+ interrupt-controller;
compatible = "semtech,sx1505q";
reg = <0x20>;
@@ -79,6 +80,7 @@ gpio2: gpio-expander@20 {
gpio3: gpio-expander@21 {
#gpio-cells = <2>;
#interrupt-cells = <2>;
+ interrupt-controller;
compatible = "semtech,sx1505q";
reg = <0x21>;
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
index fd671c7a1e5d6..6e1f0f164cb4f 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-wpcm450.dtsi
@@ -120,6 +120,7 @@ gpio0: gpio@0 {
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>,
<3 IRQ_TYPE_LEVEL_HIGH>,
<4 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
interrupt-controller;
};
@@ -128,6 +129,7 @@ gpio1: gpio@1 {
gpio-controller;
#gpio-cells = <2>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
interrupt-controller;
};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
index 1640763fd4af2..ff0d684622f74 100644
--- a/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-apalis-v1.1.dtsi
@@ -997,7 +997,6 @@ touchscreen@41 {
compatible = "st,stmpe811";
reg = <0x41>;
irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
- interrupt-controller;
id = <0>;
blocks = <0x5>;
irq-trigger = <0x1>;
diff --git a/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi b/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
index 3b6fad273cabf..d38f1dd38a906 100644
--- a/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-apalis.dtsi
@@ -980,7 +980,6 @@ touchscreen@41 {
compatible = "st,stmpe811";
reg = <0x41>;
irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
- interrupt-controller;
id = <0>;
blocks = <0x5>;
irq-trigger = <0x1>;
diff --git a/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi b/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
index 4eb526fe9c558..81c8a5fd92cce 100644
--- a/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra30-colibri.dtsi
@@ -861,7 +861,6 @@ touchscreen@41 {
compatible = "st,stmpe811";
reg = <0x41>;
irq-gpio = <&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
- interrupt-controller;
id = <0>;
blocks = <0x5>;
irq-trigger = <0x1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
index db8c332df6a1d..cad112e054758 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
@@ -227,7 +227,6 @@ bridge@1,0 {
#address-cells = <3>;
#size-cells = <2>;
- #interrupt-cells = <1>;
bridge@2,1 {
compatible = "pci10b5,8605";
@@ -235,7 +234,6 @@ bridge@2,1 {
#address-cells = <3>;
#size-cells = <2>;
- #interrupt-cells = <1>;
/* Intel Corporation I210 Gigabit Network Connection */
ethernet@3,0 {
@@ -250,7 +248,6 @@ bridge@2,2 {
#address-cells = <3>;
#size-cells = <2>;
- #interrupt-cells = <1>;
/* Intel Corporation I210 Gigabit Network Connection */
switch_nic: ethernet@4,0 {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
index 99f4f6ac71d4a..c1ae7c47b4422 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
@@ -245,6 +245,7 @@ pca9539: pca9539@74 {
reg = <0x74>;
gpio-controller;
#gpio-cells = <2>;
+ #interrupt-cells = <2>;
interrupt-controller;
interrupt-parent = <&gpio2>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
@@ -390,7 +391,6 @@ pci_root: root@0,0 {
#address-cells = <3>;
#size-cells = <2>;
- #interrupt-cells = <1>;
};
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
index 4cc965277c521..dcb4f6a32f809 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
@@ -619,7 +619,6 @@ stmpe811@41 {
blocks = <0x5>;
id = <0>;
interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
interrupt-parent = <&gpio4>;
irq-trigger = <0x1>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
index 11d9c7a2dacb1..6cc4d6fd5f28b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
@@ -543,7 +543,6 @@ stmpe811@41 {
blocks = <0x5>;
interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&gpio6>;
- interrupt-controller;
id = <0>;
irq-trigger = <0x1>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
index a63e73adc1fc5..42b2ba23aefc9 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
@@ -225,7 +225,6 @@ da9063: pmic@58 {
pinctrl-0 = <&pinctrl_pmic>;
interrupt-parent = <&gpio2>;
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
- interrupt-controller;
onkey {
compatible = "dlg,da9063-onkey";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
index 113974520d544..c0c47adc5866e 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-pfla02.dtsi
@@ -124,6 +124,7 @@ pmic@58 {
reg = <0x58>;
interrupt-parent = <&gpio2>;
interrupts = <9 IRQ_TYPE_LEVEL_LOW>; /* active-low GPIO2_9 */
+ #interrupt-cells = <2>;
interrupt-controller;
regulators {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
index 86b4269e0e011..85e278eb20161 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-phycore-som.dtsi
@@ -100,6 +100,7 @@ pmic: pmic@58 {
interrupt-parent = <&gpio1>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
+ #interrupt-cells = <2>;
gpio-controller;
#gpio-cells = <2>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
index 12361fcbe24af..1b965652291bf 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-pico-dwarf.dts
@@ -63,6 +63,7 @@ pca9554: io-expander@25 {
gpio-controller;
#gpio-cells = <2>;
#interrupt-cells = <2>;
+ interrupt-controller;
reg = <0x25>;
};
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
index 16b4e06c4efad..a248b8a453421 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
@@ -338,6 +338,7 @@ gpio6: io-expander@22 {
reg = <0x22>;
gpio-controller;
#gpio-cells = <2>;
+ #interrupt-cells = <2>;
interrupt-controller;
interrupt-parent = <&gpio3>;
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm/boot/dts/st/stm32429i-eval.dts b/arch/arm/boot/dts/st/stm32429i-eval.dts
index 576235ec3c516..afa417b34b25f 100644
--- a/arch/arm/boot/dts/st/stm32429i-eval.dts
+++ b/arch/arm/boot/dts/st/stm32429i-eval.dts
@@ -222,7 +222,6 @@ stmpe1600: stmpe1600@42 {
reg = <0x42>;
interrupts = <8 3>;
interrupt-parent = <&gpioi>;
- interrupt-controller;
wakeup-source;
stmpegpio: stmpe_gpio {
diff --git a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
index 510cca5acb79c..7a701f7ef0c70 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
@@ -64,7 +64,6 @@ touchscreen@38 {
reg = <0x38>;
interrupts = <2 2>;
interrupt-parent = <&gpiof>;
- interrupt-controller;
touchscreen-size-x = <480>;
touchscreen-size-y = <800>;
status = "okay";
diff --git a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
index 9a234dc1431d1..5b240769d300e 100644
--- a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
+++ b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts
@@ -415,7 +415,6 @@ stmpe811@41 {
reg = <0x41>;
interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
interrupt-parent = <&gpio2>;
- interrupt-controller;
id = <0>;
blocks = <0x5>;
irq-trigger = <0x1>;
--
2.43.0
Powered by blists - more mailing lists