[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <c990453c-f43a-48a7-9285-f8b391604f57@foss.st.com>
Date: Thu, 29 Feb 2024 09:59:14 +0100
From: Alexandre TORGUE <alexandre.torgue@...s.st.com>
To: Dario Binacchi <dario.binacchi@...rulasolutions.com>,
<linux-kernel@...r.kernel.org>
CC: <linux-amarula@...rulasolutions.com>,
Raphael Gallais-Pou
<raphael.gallais-pou@...s.st.com>,
Lee Jones <lee@...nel.org>, Andre Przywara
<andre.przywara@....com>,
Conor Dooley <conor+dt@...nel.org>,
Krzysztof
Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Leonard Göhrs
<l.goehrs@...gutronix.de>,
Linus Walleij <linus.walleij@...aro.org>,
Maxime
Coquelin <mcoquelin.stm32@...il.com>,
Rob Herring <robh+dt@...nel.org>, Sean
Nyekjaer <sean@...nix.com>,
<devicetree@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
<linux-stm32@...md-mailman.stormreply.com>
Subject: Re: [PATCH v10 0/5] Add display support for stm32f769-disco board
Hi Dario
On 1/27/24 16:28, Dario Binacchi wrote:
> The series adds display support for the stm32f769-disco board. It has been
> tested on hardware revisions MB1225-B03 and MB1166-A09. This required
> modifications to the nt35510 driver that have already been applied.
>
> Changes in v10:
> - Drop backlight. From a closer analysis of the schematics
> en.MB1225-F769I-B01_Schematic.pdf and en.mb1166-default-a09-schematic.pdf,
> it is noticed that the GPIO I14 is connected to an unmounted
> resistor (n/a), making the backlight functionality via GPIO unusable.
> - Drop backlight references
>
> Changes in v9:
> - Drop 'interrupts' property to fix yaml checks
> - Rename vcc_3v3 to to vcc-3v3
> - Rename panel-dsi@0 to panel@0 to fix yaml warnings
> - Change commit message
> - Rename stm32f769-disco-mb1225-revb03-mb1166-reva09 to
> stm32f769-disco-mb1166-reva09
>
> Changes in v8:
> - Add Acked-by tag of Lee Jones
> - Add Reviewed-by tag of Raphael Gallais-Pou
> - Add Reviewed-by tag of Raphael Gallais-Pou
> - Remove unit name from 'ltdc/port/endpoint@0' to fix the compiling
> warning:
> ../arch/arm/boot/dts/st/stm32f769-disco.dts:189.28-191.5: Warning
> (unit_address_vs_reg): /soc/display-controller@...16800/port/endpoint@0: node
> has a unit name, but no reg or ranges property
> - Add Reviewed-by tag of Linus Walleij
> - Add Reviewed-by tag of Raphael Gallais-Pou
>
> Changes in v7:
> - Replace .dts with .dtb in the Makefile
>
> Changes in v6:
> - Drop patches
> - [5/8] dt-bindings: nt35510: add compatible for FRIDA FRD400B25025-A-CTK
> - [7/8] drm/panel: nt35510: move hardwired parameters to configuration
> - [8/8] drm/panel: nt35510: support FRIDA FRD400B25025-A-CTK
> because applied by the maintainer Linus Walleij
>
> Changes in v5:
> - Replace GPIOD_ASIS with GPIOD_OUT_HIGH in the call to devm_gpiod_get_optional().
>
> Changes in v2:
> - Add Acked-by tag of Conor Dooley
> - Change the status of panel_backlight node to "disabled"
> - Delete backlight property from panel0 node.
> - Re-write the patch [8/8] "drm/panel: nt35510: support FRIDA FRD400B25025-A-CTK"
> in the same style as the original driver.
>
> Dario Binacchi (5):
> dt-bindings: mfd: stm32f7: Add binding definition for DSI
> ARM: dts: stm32: add DSI support on stm32f769
> ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f769-disco
> ARM: dts: stm32: add display support on stm32f769-disco
> ARM: dts: add stm32f769-disco-mb1166-reva09
>
> arch/arm/boot/dts/st/Makefile | 1 +
> .../dts/st/stm32f769-disco-mb1166-reva09.dts | 13 ++++
> arch/arm/boot/dts/st/stm32f769-disco.dts | 70 +++++++++++++++++--
> arch/arm/boot/dts/st/stm32f769.dtsi | 20 ++++++
> include/dt-bindings/mfd/stm32f7-rcc.h | 1 +
> 5 files changed, 101 insertions(+), 4 deletions(-)
> create mode 100644 arch/arm/boot/dts/st/stm32f769-disco-mb1166-reva09.dts
> create mode 100644 arch/arm/boot/dts/st/stm32f769.dtsi
>
Series applied on stm32-next.
Thanks for your efforts.
Alex
Powered by blists - more mailing lists