[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240301084901.16656-1-eichest@gmail.com>
Date: Fri, 1 Mar 2024 09:48:59 +0100
From: Stefan Eichenberger <eichest@...il.com>
To: nm@...com,
vigneshr@...com,
kristo@...nel.org,
robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org
Cc: linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
francesco.dolcini@...adex.com,
Stefan Eichenberger <stefan.eichenberger@...adex.com>
Subject: [PATCH v1 0/2] arm64: dts: ti: k3-am62-verdin: add sleep-moci support
From: Stefan Eichenberger <stefan.eichenberger@...adex.com>
This patch series adds support for sleep-moci to the Verdin AM62 in
combination with the Dahlia carrier board. sleep-moci is a GPIO that
allows the system on module to turn off regulators that are not needed
in suspend mode on the carrier board.
Commit ba9d3cd71f15 ("dt-bindings: usb: microchip,usb5744: Remove
peer-hub as requirement") from linux-next is needed to make DTB_CHECK
pass without peer-hub set for the hub on the usb1 interface.
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@...adex.com>
Stefan Eichenberger (2):
arm64: dts: ti: k3-am62-verdin: replace sleep-moci hog with regulator
arm64: dts: ti: k3-am62-verdin-dahlia: support sleep-moci
.../boot/dts/ti/k3-am62-verdin-dahlia.dtsi | 22 +++++++++++++++++
arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi | 24 ++++++++++++-------
2 files changed, 38 insertions(+), 8 deletions(-)
--
2.40.1
Powered by blists - more mailing lists