| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240301112638.990045-1-quic_msavaliy@quicinc.com>
Date: Fri, 1 Mar 2024 16:56:38 +0530
From: Mukesh Kumar Savaliya <quic_msavaliy@...cinc.com>
To: konrad.dybcio@...aro.org, bjorn.andersson@...aro.org, vkoul@...nel.org,
andi.shyti@...nel.org, wsa@...nel.org, linux-arm-msm@...r.kernel.org,
dmaengine@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-i2c@...r.kernel.org
Cc: quic_vdadhani@...cinc.com,
Mukesh Kumar Savaliya <quic_msavaliy@...cinc.com>
Subject: [PATCH v1] i2c: i2c-qcom-geni: Parse Error correctly in i2c GSI mode
we are seeing protocol errors like NACK as transfer failure but
ideally it should report exact error like NACK, BUS_PROTO or ARB_LOST.
Hence we are adding such error support in GSI mode and reporting it
accordingly by adding respective error logs.
geni_i2c_gpi_xfer() needed to allocate heap based memory instead of
stack memory to handle and store the geni_i2c_dev handle.
Copy event status from GSI driver to the i2c device status and parse
error when callback comes from gsi driver to the i2c driver. In the
gpi.c, we need to store callback param into i2c config data structure
so that inside the i2c driver, we can check what exactly the error is
and parse it accordingly.
Fixes: d8703554f4de ("i2c: qcom-geni: Add support for GPI DMA")
Co-developed-by: Viken Dadhaniya <quic_vdadhani@...cinc.com>
Signed-off-by: Viken Dadhaniya <quic_vdadhani@...cinc.com>
Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@...cinc.com>
---
drivers/dma/qcom/gpi.c | 12 +++++++-
drivers/i2c/busses/i2c-qcom-geni.c | 46 +++++++++++++++++++-----------
include/linux/dma/qcom-gpi-dma.h | 4 +++
3 files changed, 44 insertions(+), 18 deletions(-)
diff --git a/drivers/dma/qcom/gpi.c b/drivers/dma/qcom/gpi.c
index 1c93864e0e4d..6d718916fba4 100644
--- a/drivers/dma/qcom/gpi.c
+++ b/drivers/dma/qcom/gpi.c
@@ -1076,7 +1076,17 @@ static void gpi_process_xfer_compl_event(struct gchan *gchan,
dev_dbg(gpii->gpi_dev->dev, "Residue %d\n", result.residue);
dma_cookie_complete(&vd->tx);
- dmaengine_desc_get_callback_invoke(&vd->tx, &result);
+ if (gchan->protocol == QCOM_GPI_I2C) {
+ struct dmaengine_desc_callback cb;
+ struct gpi_i2c_config *i2c;
+
+ dmaengine_desc_get_callback(&vd->tx, &cb);
+ i2c = cb.callback_param;
+ i2c->status = compl_event->status;
+ dmaengine_desc_callback_invoke(&cb, &result);
+ } else {
+ dmaengine_desc_get_callback_invoke(&vd->tx, &result);
+ }
gpi_free_desc:
spin_lock_irqsave(&gchan->vc.lock, flags);
diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index da94df466e83..5092d10e8f47 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -484,9 +484,16 @@ static int geni_i2c_tx_one_msg(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
static void i2c_gpi_cb_result(void *cb, const struct dmaengine_result *result)
{
- struct geni_i2c_dev *gi2c = cb;
-
- if (result->result != DMA_TRANS_NOERROR) {
+ struct gpi_i2c_config *i2c = cb;
+ struct geni_i2c_dev *gi2c = i2c->gi2c;
+
+ if (i2c->status & (BIT(NACK) << 5)) {
+ geni_i2c_err(gi2c, NACK);
+ } else if (i2c->status & (BIT(BUS_PROTO) << 5)) {
+ geni_i2c_err(gi2c, BUS_PROTO);
+ } else if (i2c->status & (BIT(ARB_LOST) << 5)) {
+ geni_i2c_err(gi2c, ARB_LOST);
+ } else if (result->result != DMA_TRANS_NOERROR) {
dev_err(gi2c->se.dev, "DMA txn failed:%d\n", result->result);
gi2c->err = -EIO;
} else if (result->residue) {
@@ -568,7 +575,7 @@ static int geni_i2c_gpi(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
}
desc->callback_result = i2c_gpi_cb_result;
- desc->callback_param = gi2c;
+ desc->callback_param = peripheral;
dmaengine_submit(desc);
*buf = dma_buf;
@@ -585,33 +592,38 @@ static int geni_i2c_gpi(struct geni_i2c_dev *gi2c, struct i2c_msg *msg,
static int geni_i2c_gpi_xfer(struct geni_i2c_dev *gi2c, struct i2c_msg msgs[], int num)
{
struct dma_slave_config config = {};
- struct gpi_i2c_config peripheral = {};
+ struct gpi_i2c_config *peripheral;
int i, ret = 0, timeout;
dma_addr_t tx_addr, rx_addr;
void *tx_buf = NULL, *rx_buf = NULL;
const struct geni_i2c_clk_fld *itr = gi2c->clk_fld;
- config.peripheral_config = &peripheral;
- config.peripheral_size = sizeof(peripheral);
+ peripheral = devm_kzalloc(gi2c->se.dev, sizeof(*peripheral), GFP_KERNEL);
+ if (!peripheral)
+ return -ENOMEM;
+
+ config.peripheral_config = peripheral;
+ config.peripheral_size = sizeof(struct gpi_i2c_config);
- peripheral.pack_enable = I2C_PACK_TX | I2C_PACK_RX;
- peripheral.cycle_count = itr->t_cycle_cnt;
- peripheral.high_count = itr->t_high_cnt;
- peripheral.low_count = itr->t_low_cnt;
- peripheral.clk_div = itr->clk_div;
- peripheral.set_config = 1;
- peripheral.multi_msg = false;
+ peripheral->gi2c = gi2c;
+ peripheral->pack_enable = I2C_PACK_TX | I2C_PACK_RX;
+ peripheral->cycle_count = itr->t_cycle_cnt;
+ peripheral->high_count = itr->t_high_cnt;
+ peripheral->low_count = itr->t_low_cnt;
+ peripheral->clk_div = itr->clk_div;
+ peripheral->set_config = 1;
+ peripheral->multi_msg = false;
for (i = 0; i < num; i++) {
gi2c->cur = &msgs[i];
gi2c->err = 0;
dev_dbg(gi2c->se.dev, "msg[%d].len:%d\n", i, gi2c->cur->len);
- peripheral.stretch = 0;
+ peripheral->stretch = 0;
if (i < num - 1)
- peripheral.stretch = 1;
+ peripheral->stretch = 1;
- peripheral.addr = msgs[i].addr;
+ peripheral->addr = msgs[i].addr;
ret = geni_i2c_gpi(gi2c, &msgs[i], &config,
&tx_addr, &tx_buf, I2C_WRITE, gi2c->tx_c);
diff --git a/include/linux/dma/qcom-gpi-dma.h b/include/linux/dma/qcom-gpi-dma.h
index 6680dd1a43c6..af264f769344 100644
--- a/include/linux/dma/qcom-gpi-dma.h
+++ b/include/linux/dma/qcom-gpi-dma.h
@@ -64,6 +64,8 @@ enum i2c_op {
* @set_config: set peripheral config
* @rx_len: receive length for buffer
* @op: i2c cmd
+ * @status: stores gpi event status based on interrupt
+ * @gi2c: pointer to i2c device handle
* @muli-msg: is part of multi i2c r-w msgs
*/
struct gpi_i2c_config {
@@ -78,6 +80,8 @@ struct gpi_i2c_config {
u32 rx_len;
enum i2c_op op;
bool multi_msg;
+ u32 status;
+ struct geni_i2c_dev *gi2c;
};
#endif /* QCOM_GPI_DMA_H */
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
Powered by blists - more mailing lists