linux-kernel - [PATCH v4 0/2] Add JH7110 MIPI DPHY TX support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240301012406.92589-1-shengyang.chen@starfivetech.com>
Date: Fri,  1 Mar 2024 09:24:04 +0800
From: Shengyang Chen <shengyang.chen@...rfivetech.com>
To: devicetree@...r.kernel.org,
	linux-phy@...ts.infradead.org
Cc: vkoul@...nel.org,
	kishon@...nel.org,
	robh+dt@...nel.org,
	krzysztof.kozlowski+dt@...aro.org,
	conor+dt@...nel.org,
	p.zabel@...gutronix.de,
	minda.chen@...rfivetech.com,
	changhuang.liang@...rfivetech.com,
	rogerq@...nel.org,
	geert+renesas@...der.be,
	keith.zhao@...rfivetech.com,
	shengyang.chen@...rfivetech.com,
	linux-kernel@...r.kernel.org
Subject: [PATCH v4 0/2] Add JH7110 MIPI DPHY TX support

This patchset adds mipi dphy tx support for the StarFive JH7110 SoC.
It is used to transfer DSI data. The series has been tested on
the VisionFive 2 board.


change since v3:
- Rebased on tag v6.8-rc6.

patch 2:
- Lower case for hex value.
- Replace bit shifts operation with macro definitions.
- Drop delay in stf_dphy_hw_reset().
- Change variable declarations order in stf_dphy_configure().

v3: https://patchwork.kernel.org/project/linux-phy/cover/20240206061921.107372-1-shengyang.chen@starfivetech.com/


change since v2:
- Rebased on tag v6.8-rc3.

patch 2:
- Drop regulator operation.

v2: https://patchwork.kernel.org/project/linux-phy/cover/20240109071246.24065-1-shengyang.chen@starfivetech.com/


changes since v1:
- Rebased on tag v6.7.

patch 1:
- Drop 'dphy_'prefix.
- Drop DSI reset.
- Drop unnecessary resets.


patch 2:
- Changed the commit message.
- Use dev_err_probe() and PTR_ERR() in probing.
- Drop DSI reset operation.
- Drop unnecessary resets operation.
- Add configs in array for full support of the module
- Changed 'void *io_addr' to 'void __iomem *io_addr'.

v1: https://patchwork.kernel.org/project/linux-phy/cover/20231117130421.79261-1-shengyang.chen@starfivetech.com/


Shengyang Chen (2):
  dt-bindings: phy: Add starfive,jh7110-dphy-tx
  phy: starfive: Add mipi dphy tx support

 .../bindings/phy/starfive,jh7110-dphy-tx.yaml |  68 ++
 MAINTAINERS                                   |   7 +
 drivers/phy/starfive/Kconfig                  |  10 +
 drivers/phy/starfive/Makefile                 |   1 +
 drivers/phy/starfive/phy-jh7110-dphy-tx.c     | 702 ++++++++++++++++++
 5 files changed, 788 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-tx.yaml
 create mode 100644 drivers/phy/starfive/phy-jh7110-dphy-tx.c

-- 
2.17.1