| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <9b5cf569-bbff-4520-8815-70b6f4c41625@tuxon.dev>
Date: Sun, 3 Mar 2024 14:24:03 +0200
From: claudiu beznea <claudiu.beznea@...on.dev>
To: Varshini Rajendran <varshini.rajendran@...rochip.com>,
robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org,
nicolas.ferre@...rochip.com, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 37/39] ARM: dts: at91: sam9x7: add device tree for SoC
On 23.02.2024 19:30, Varshini Rajendran wrote:
> Add device tree file for SAM9X7 SoC family.
>
> Co-developed-by: Nicolas Ferre <nicolas.ferre@...rochip.com>
> Signed-off-by: Nicolas Ferre <nicolas.ferre@...rochip.com>
> Signed-off-by: Varshini Rajendran <varshini.rajendran@...rochip.com>
> ---
> Changes in v4:
> - Added pwm node support
> - Added microchip,nr-irqs to the interrupt-controller node for the
> driver to fetch the NIRQs
> - Dropped USB nodes owing to the discussion here
> https://lore.kernel.org/linux-devicetree/CAL_JsqJ9PrX6fj-EbffeJce09MXs=B7t+KS_kOinxaRx38=WxA@mail.gmail.com/
> (Explained elaborartely in the cover letter)
> ---
> arch/arm/boot/dts/microchip/sam9x7.dtsi | 1214 +++++++++++++++++++++++
> 1 file changed, 1214 insertions(+)
> create mode 100644 arch/arm/boot/dts/microchip/sam9x7.dtsi
>
> diff --git a/arch/arm/boot/dts/microchip/sam9x7.dtsi b/arch/arm/boot/dts/microchip/sam9x7.dtsi
> new file mode 100644
> index 000000000000..ddbeb456bb59
> --- /dev/null
> +++ b/arch/arm/boot/dts/microchip/sam9x7.dtsi
> @@ -0,0 +1,1214 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * sam9x7.dtsi - Device Tree Include file for Microchip SAM9X7 SoC family
> + *
> + * Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries
> + *
> + * Author: Varshini Rajendran <varshini.rajendran@...rochip.com>
> + */
> +
> +#include <dt-bindings/clock/at91.h>
> +#include <dt-bindings/dma/at91.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/mfd/at91-usart.h>
> +#include <dt-bindings/mfd/atmel-flexcom.h>
> +#include <dt-bindings/pinctrl/at91.h>
> +
> +/ {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + model = "Microchip SAM9X7 SoC";
> + compatible = "microchip,sam9x7";
> + interrupt-parent = <&aic>;
> +
> + aliases {
> + serial0 = &dbgu;
> + gpio0 = &pioA;
> + gpio1 = &pioB;
> + gpio2 = &pioC;
> + gpio3 = &pioD;
> + };
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu@0 {
> + compatible = "arm,arm926ej-s";
> + device_type = "cpu";
> + reg = <0>;
> + };
> + };
> +
> + clocks {
> + slow_xtal: clock-slowxtal {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + main_xtal: clock-mainxtal {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> + };
> +
> + sram: sram@...000 {
> + compatible = "mmio-sram";
> + reg = <0x300000 0x10000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0x300000 0x10000>;
As of [1] the order should be something like:
1/ compatible
2/ reg
3/ ranges
4/ #address-cells
#size-cells
Please check the rest of the file to comply with this [1]
[1]
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/dts-coding-style.rst#n115
> + };
> +
> + ahb {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + sdmmc0: mmc@...00000 {
> + compatible = "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci";
> + reg = <0x80000000 0x300>;
> + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>, <&pmc PMC_TYPE_GCK 12>;
> + clock-names = "hclock", "multclk";
> + assigned-clocks = <&pmc PMC_TYPE_GCK 12>;
> + assigned-clock-rates = <100000000>;
> + status = "disabled";
> + };
> +
> + sdmmc1: mmc@...00000 {
> + compatible = "microchip,sam9x7-sdhci", "microchip,sam9x60-sdhci";
> + reg = <0x90000000 0x300>;
> + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&pmc PMC_TYPE_GCK 26>;
> + clock-names = "hclock", "multclk";
> + assigned-clocks = <&pmc PMC_TYPE_GCK 26>;
> + assigned-clock-rates = <100000000>;
> + status = "disabled";
> + };
> + };
> +
> + apb {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + flx4: flexcom@...00000 {
> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
> + reg = <0xf0000000 0x200>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xf0000000 0x800>;
> + status = "disabled";
> +
> + uart4: serial@200 {
> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
> + reg = <0x200 0x200>;
> + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
> + dmas = <&dma0
This one ^
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(8))>,
> + <&dma0
and this one ^ should be alligned as of coding
style (see [1] above). Same for the rest of occurencies I will not comment on.
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(9))>;
> + dma-names = "tx", "rx";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
> + clock-names = "usart";
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + spi4: spi@400 {
> + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
> + reg = <0x400 0x200>;
> + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
> + clock-names = "spi_clk";
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(8))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(9))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + i2c4: i2c@600 {
> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(8))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(9))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> + };
> +
> + flx5: flexcom@...04000 {
> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
> + reg = <0xf0004000 0x200>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xf0004000 0x800>;
> + status = "disabled";
> +
> + uart5: serial@200 {
> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
> + reg = <0x200 0x200>;
> + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(10))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(11))>;
> + dma-names = "tx", "rx";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
> + clock-names = "usart";
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + spi5: spi@400 {
> + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
> + reg = <0x400 0x200>;
> + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
> + clock-names = "spi_clk";
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(10))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(11))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + i2c5: i2c@600 {
> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(10))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(11))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> + };
> +
> + dma0: dma-controller@...08000 {
> + compatible = "microchip,sam9x7-dma", "atmel,sama5d4-dma";
> + reg = <0xf0008000 0x1000>;
> + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
> + #dma-cells = <1>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
> + clock-names = "dma_clk";
> + status = "disabled";
> + };
> +
> + ssc: ssc@...10000 {
> + compatible = "microchip,sam9x7-ssc", "atmel,at91sam9g45-ssc";
> + reg = <0xf0010000 0x4000>;
> + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(38))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(39))>;
> + dma-names = "tx", "rx";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
> + clock-names = "pclk";
> + status = "disabled";
> + };
> +
> + i2s: i2s@...1c000 {
> + compatible = "microchip,sam9x7-i2smcc", "microchip,sam9x60-i2smcc";
> + reg = <0xf001c000 0x100>;
> + interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(36))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(37))>;
> + dma-names = "tx", "rx";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_GCK 34>;
> + clock-names = "pclk", "gclk";
> + status = "disabled";
> + };
> +
> + flx11: flexcom@...20000 {
> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
> + reg = <0xf0020000 0x200>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xf0020000 0x800>;
> + status = "disabled";
> +
> + uart11: serial@200 {
> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
> + reg = <0x200 0x200>;
> + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(22))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(23))>;
> + dma-names = "tx", "rx";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
> + clock-names = "usart";
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + i2c11: i2c@600 {
> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <32 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(22))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(23))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> + };
> +
> + flx12: flexcom@...24000 {
> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
> + reg = <0xf0024000 0x200>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xf0024000 0x800>;
> + status = "disabled";
> +
> + uart12: serial@200 {
> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
> + reg = <0x200 0x200>;
> + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(24))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(25))>;
> + dma-names = "tx", "rx";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
> + clock-names = "usart";
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + i2c12: i2c@600 {
> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <33 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(24))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(25))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> + };
> +
> + pit64b0: timer@...28000 {
> + compatible = "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b";
> + reg = <0xf0028000 0x100>;
> + interrupts = <37 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 37>, <&pmc PMC_TYPE_GCK 37>;
> + clock-names = "pclk", "gclk";
> + };
> +
> + sha: crypto@...2c000 {
> + compatible = "microchip,sam9x7-sha", "atmel,at91sam9g46-sha";
> + reg = <0xf002c000 0x100>;
> + interrupts = <41 IRQ_TYPE_LEVEL_HIGH 0>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(34))>;
> + dma-names = "tx";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
> + clock-names = "sha_clk";
> + };
> +
> + trng: rng@...30000 {
> + compatible = "microchip,sam9x7-trng", "microchip,sam9x60-trng";
> + reg = <0xf0030000 0x100>;
> + interrupts = <38 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
> + status = "disabled";
> + };
> +
> + aes: crypto@...34000 {
> + compatible = "microchip,sam9x7-aes", "atmel,at91sam9g46-aes";
> + reg = <0xf0034000 0x100>;
> + interrupts = <39 IRQ_TYPE_LEVEL_HIGH 0>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(32))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(33))>;
> + dma-names = "tx", "rx";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
> + clock-names = "aes_clk";
> + };
> +
> + tdes: crypto@...38000 {
> + compatible = "microchip,sam9x7-tdes", "atmel,at91sam9g46-tdes";
> + reg = <0xf0038000 0x100>;
> + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 0>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(31))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(30))>;
> + dma-names = "tx", "rx";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
> + clock-names = "tdes_clk";
> + };
> +
> + classd: classd@...3c000 {
>From documentation I get that node name should be sound
> + compatible = "microchip,sam9x7-classd", "atmel,sama5d2-classd";
> + reg = <0xf003c000 0x100>;
> + interrupts = <42 IRQ_TYPE_LEVEL_HIGH 7>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(35))>;
> + dma-names = "tx";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_GCK 42>;
> + clock-names = "pclk", "gclk";
> + status = "disabled";
> + };
> +
> + pit64b1: timer@...40000 {
> + compatible = "microchip,sam9x7-pit64b", "microchip,sam9x60-pit64b";
> + reg = <0xf0040000 0x100>;
> + interrupts = <58 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 58>, <&pmc PMC_TYPE_GCK 58>;
> + clock-names = "pclk", "gclk";
> + };
> +
> + can0: can@...00000 {
> + compatible = "bosch,m_can";
> + reg = <0xf8000000 0x100>, <0x300000 0x7800>;
> + reg-names = "m_can", "message_ram";
> + interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0
> + 68 IRQ_TYPE_LEVEL_HIGH 0>;
>From [1]: Each entry in arrays with multiple cells, e.g. "reg" with two IO
addresses, shall be enclosed in <>.
> + interrupt-names = "int0", "int1";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 29>, <&pmc PMC_TYPE_GCK 29>;
> + clock-names = "hclk", "cclk";
> + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 29>;
> + assigned-clock-rates = <480000000>, <40000000>;
> + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
> + bosch,mram-cfg = <0x3400 0 0 64 0 0 32 32>;
> + status = "disabled";
> + };
> +
> + can1: can@...04000 {
> + compatible = "bosch,m_can";
> + reg = <0xf8004000 0x100>, <0x300000 0xbc00>;
> + reg-names = "m_can", "message_ram";
> + interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0
> + 69 IRQ_TYPE_LEVEL_HIGH 0>;
> + interrupt-names = "int0", "int1";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 30>, <&pmc PMC_TYPE_GCK 30>;
> + clock-names = "hclk", "cclk";
> + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_GCK 30>;
> + assigned-clock-rates = <480000000>, <40000000>;
> + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
> + bosch,mram-cfg = <0x7800 0 0 64 0 0 32 32>;
> + status = "disabled";
> + };
> +
> + tcb: timer@...08000 {
> + compatible = "microchip,sam9x7-tcb","atmel,sama5d2-tcb", "simple-mfd", "syscon";
> + reg = <0xf8008000 0x100>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_GCK 17>, <&clk32k 0>;
> + clock-names = "t0_clk", "gclk", "slow_clk";
> + status = "disabled";
> + };
> +
> + flx6: flexcom@...10000 {
> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
> + reg = <0xf8010000 0x200>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xf8010000 0x800>;
> + status = "disabled";
> +
> + uart6: serial@200 {
> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
> + reg = <0x200 0x200>;
> + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(12))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(13))>;
> + dma-names = "tx", "rx";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
> + clock-names = "usart";
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + i2c6: i2c@600 {
> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(12))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(13))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> + };
> +
> + flx7: flexcom@...14000 {
> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
> + reg = <0xf8014000 0x200>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xf8014000 0x800>;
> + status = "disabled";
> +
> + uart7: serial@200 {
> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
> + reg = <0x200 0x200>;
> + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(14))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(15))>;
> + dma-names = "tx", "rx";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
> + clock-names = "usart";
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + i2c7: i2c@600 {
> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(14))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(15))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> + };
> +
> + flx8: flexcom@...18000 {
> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
> + reg = <0xf8018000 0x200>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xf8018000 0x800>;
> + status = "disabled";
> +
> + uart8: serial@200 {
> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
> + reg = <0x200 0x200>;
> + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(16))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(17))>;
> + dma-names = "tx", "rx";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
> + clock-names = "usart";
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + i2c8: i2c@600 {
> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(16))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(17))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> + };
> +
> + flx0: flexcom@...1c000 {
> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
> + reg = <0xf801c000 0x200>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xf801c000 0x800>;
> + status = "disabled";
> +
> + uart0: serial@200 {
> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
> + reg = <0x200 0x200>;
> + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(0))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(1))>;
> + dma-names = "tx", "rx";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
> + clock-names = "usart";
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + spi0: spi@400 {
> + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
> + reg = <0x400 0x200>;
> + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
> + clock-names = "spi_clk";
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(0))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(1))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + i2c0: i2c@600 {
> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <5 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(0))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(1))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> + };
> +
> + flx1: flexcom@...20000 {
> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
> + reg = <0xf8020000 0x200>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xf8020000 0x800>;
> + status = "disabled";
> +
> + uart1: serial@200 {
> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
> + reg = <0x200 0x200>;
> + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(2))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(3))>;
> + dma-names = "tx", "rx";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
> + clock-names = "usart";
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + spi1: spi@400 {
> + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
> + reg = <0x400 0x200>;
> + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
> + clock-names = "spi_clk";
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(2))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(3))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c@600 {
> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(2))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(3))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> + };
> +
> + flx2: flexcom@...24000 {
> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
> + reg = <0xf8024000 0x200>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xf8024000 0x800>;
> + status = "disabled";
> +
> + uart2: serial@200 {
> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
> + reg = <0x200 0x200>;
> + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(4))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(5))>;
> + dma-names = "tx", "rx";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
> + clock-names = "usart";
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + spi2: spi@400 {
> + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
> + reg = <0x400 0x200>;
> + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
> + clock-names = "spi_clk";
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(4))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(5))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c@600 {
> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(4))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(5))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> + };
> +
> + flx3: flexcom@...28000 {
> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
> + reg = <0xf8028000 0x200>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xf8028000 0x800>;
> + status = "disabled";
> +
> + uart3: serial@200 {
> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
> + reg = <0x200 0x200>;
> + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(6))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(7))>;
> + dma-names = "tx", "rx";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
> + clock-names = "usart";
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + spi3: spi@400 {
> + compatible = "microchip,sam9x7-spi", "atmel,at91rm9200-spi";
> + reg = <0x400 0x200>;
> + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
> + clock-names = "spi_clk";
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(6))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(7))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + i2c3: i2c@600 {
> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(6))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(7))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> + };
> +
> + gmac: ethernet@...2c000 {
> + compatible = "microchip,sam9x7-gem", "microchip,sama7g5-gem" ;
There is a space at the end of the line.
> + reg = <0xf802c000 0x1000>;
> + interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 0 */
Same here: add array entry with <>
> + 60 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 1 */
> + 61 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 2 */
> + 62 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 3 */
> + 63 IRQ_TYPE_LEVEL_HIGH 3 /* Queue 4 */
> + 64 IRQ_TYPE_LEVEL_HIGH 3>; /* Queue 5 */
You have spaces here ^
for queue1..5 but not for q0
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_GCK 24>, <&pmc PMC_TYPE_GCK 67>;
> + clock-names = "hclk", "pclk", "tx_clk", "tsu_clk";
> + assigned-clocks = <&pmc PMC_TYPE_GCK 67>;
> + status = "disabled";
> + };
> +
> + pwm0: pwm@...34000 {
> + compatible = "microchip,sam9x7-pwm", "microchip,sam9x60-pwm";
> + reg = <0xf8034000 0x300>;
> + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
> + #pwm-cells = <3>;
> + status= "disabled";
space after status
> + };
> +
> + flx9: flexcom@...40000 {
> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
> + reg = <0xf8040000 0x200>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xf8040000 0x800>;
> + status = "disabled";
> +
> + uart9: serial@200 {
> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
> + reg = <0x200 0x200>;
> + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(18))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(19))>;
> + dma-names = "tx", "rx";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
> + clock-names = "usart";
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + i2c9: i2c@600 {
> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(18))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(19))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> + };
> +
> + flx10: flexcom@...44000 {
> + compatible = "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom";
> + reg = <0xf8044000 0x200>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0x0 0xf8044000 0x800>;
> + status = "disabled";
> +
> + uart10: serial@200 {
> + compatible = "microchip,sam9x7-usart", "atmel,at91sam9260-usart";
> + reg = <0x200 0x200>;
> + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(20))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(21))>;
> + dma-names = "tx", "rx";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
> + clock-names = "usart";
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> +
> + i2c10: i2c@600 {
> + compatible = "microchip,sam9x7-i2c", "microchip,sam9x60-i2c";
> + reg = <0x600 0x200>;
> + interrupts = <16 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(20))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) |
> + AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(21))>;
> + dma-names = "tx", "rx";
> + atmel,fifo-size = <16>;
> + status = "disabled";
> + };
> + };
> +
> + sfr: sfr@...50000 {
> + compatible = "microchip,sam9x7-sfr", "microchip,sam9x60-sfr", "syscon";
> + reg = <0xf8050000 0x100>;
> + };
> +
> + matrix: matrix@...fde00 {
> + compatible = "microchip,sam9x7-matrix", "atmel,at91sam9x5-matrix", "syscon";
> + reg = <0xffffde00 0x200>;
> + };
> +
> + pmecc: ecc-engine@...fe000 {
> + compatible = "microchip,sam9x7-pmecc", "atmel,at91sam9g45-pmecc";
> + reg = <0xffffe000 0x300>,
> + <0xffffe600 0x100>;
These may fit on a single line.
> + };
> +
> + mpddrc: mpddrc@...fe800 {
> + compatible = "microchip,sam9x7-ddramc", "atmel,sama5d3-ddramc";
> + reg = <0xffffe800 0x200>;
> + clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_CORE PMC_MCK>;
> + clock-names = "ddrck", "mpddr";
> + };
> +
> + smc: smc@...fea00 {
> + compatible = "microchip,sam9x7-smc", "atmel,at91sam9260-smc", "syscon";
> + reg = <0xffffea00 0x100>;
> + };
> +
> + aic: interrupt-controller@...ff100 {
> + compatible = "microchip,sam9x7-aic", "microchip,sam9x60-aic";
microchip,sam9x7-aic looks undocumented
> + reg = <0xfffff100 0x100>;
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + atmel,external-irqs = <31>;
> + microchip,nr-irqs = <70>;
> + };
> +
> + dbgu: serial@...ff200 {
> + compatible = "microchip,sam9x7-dbgu", "microchip,sam9x7-usart", "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
> + reg = <0xfffff200 0x200>;
> + atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
> + interrupts = <47 IRQ_TYPE_LEVEL_HIGH 7>;
> + dmas = <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(28))>,
> + <&dma0
> + (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> + AT91_XDMAC_DT_PERID(29))>;
> + dma-names = "tx", "rx";
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
> + clock-names = "usart";
> + status = "disabled";
> + };
> +
> + pinctrl: pinctrl@...ff400 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "microchip,sam9x7-pinctrl", "microchip,sam9x60-pinctrl", "simple-mfd";
> + ranges = <0xfffff400 0xfffff400 0x800>;
> +
> + /* mux-mask corresponding to sam9x7 SoC in TFBGA228L package */
> + atmel,mux-mask = <
> + /* A B C D */
> + 0xffffffff 0xffffefc0 0xc0ffd000 0x00000000 /* pioA */
> + 0x07ffffff 0x0805fe7f 0x01ff9f80 0x06078000 /* pioB */
> + 0xffffffff 0x07dfffff 0xfa3fffff 0x00000000 /* pioC */
> + 0x00003fff 0x00003fe0 0x0000003f 0x00000000 /* pioD */
> + >;
> +
> + pioA: gpio@...ff400 {
> + compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
> + reg = <0xfffff400 0x200>;
> + interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
> + };
> +
> + pioB: gpio@...ff600 {
> + compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
> + reg = <0xfffff600 0x200>;
> + interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + #gpio-lines = <26>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
> + };
> +
> + pioC: gpio@...ff800 {
> + compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
> + reg = <0xfffff800 0x200>;
> + interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
> + };
> +
> + pioD: gpio@...ffa00 {
> + compatible = "microchip,sam9x7-gpio", "microchip,sam9x60-gpio", "atmel,at91rm9200-gpio";
> + reg = <0xfffffa00 0x200>;
> + interrupts = <44 IRQ_TYPE_LEVEL_HIGH 1>;
> + #gpio-cells = <2>;
> + gpio-controller;
> + #gpio-lines = <22>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
> + };
> + };
> +
> + pmc: clock-controller@...ffc00 {
> + compatible = "microchip,sam9x7-pmc", "syscon";
> + reg = <0xfffffc00 0x200>;
> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
> + #clock-cells = <2>;
> + clocks = <&clk32k 1>, <&clk32k 0>, <&main_xtal>;
> + clock-names = "td_slck", "md_slck", "main_xtal";
> + };
> +
> + reset_controller: reset-controller@...ffe00 {
> + compatible = "microchip,sam9x7-rstc", "microchip,sam9x60-rstc";
> + reg = <0xfffffe00 0x10>;
> + clocks = <&clk32k 0>;
> + };
> +
> + power_management: power-management@...ffe10 {
Usually the node name for this is poweroff. Any reason you changed it like
this?
> + compatible = "microchip,sam9x7-shdwc", "microchip,sam9x60-shdwc";
> + reg = <0xfffffe10 0x10>;
> + clocks = <&clk32k 0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + atmel,wakeup-rtc-timer;
> + atmel,wakeup-rtt-timer;
> + status = "disabled";
> + };
> +
> + rtt: rtc@...ffe20 {
> + compatible = "microchip,sam9x7-rtt", "atmel,at91sam9260-rtt";
> + reg = <0xfffffe20 0x20>;
> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&clk32k 0>;
> + };
> +
> + clk32k: sckc@...ffe50 {
Node name should be generic, e.g. clock-controller
> + compatible = "microchip,sam9x7-sckc", "microchip,sam9x60-sckc";
> + reg = <0xfffffe50 0x4>;
> + clocks = <&slow_xtal>;
> + #clock-cells = <1>;
> + };
> +
> + gpbr: syscon@...ffe60 {
> + compatible = "microchip,sam9x7-gbpr", "atmel,at91sam9260-gpbr", "syscon";
microchip,sam9x7-gbpr seems undocummented.
> + reg = <0xfffffe60 0x10>;
> + };
> +
> + rtc: rtc@...ffea8 {
> + compatible = "microchip,sam9x7-rtc", "microchip,sam9x60-rtc";
> + reg = <0xfffffea8 0x100>;
> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
> + clocks = <&clk32k 0>;
> + };
> +
> + watchdog: watchdog@...fff80 {
> + compatible = "microchip,sam9x7-wdt", "microchip,sam9x60-wdt";
> + reg = <0xffffff80 0x24>;
> + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
> + status = "disabled";
> + };
> + };
> +};
Powered by blists - more mailing lists