Message-ID: <j3krazypdc7gsvnp4kcocaftxsbjrfhj6nr2kf2cieo4bjxbv7@bqdfbirk5tei>
Date: Mon, 4 Mar 2024 18:50:59 +0100
From: Sebastian Reichel <sebastian.reichel@...labora.com>
To: Alexey Charkov <alchark@...il.com>
Cc: Rob Herring <robh+dt@...nel.org>, 
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>, 
	Heiko Stuebner <heiko@...ech.de>, Daniel Lezcano <daniel.lezcano@...aro.org>, 
	Dragan Simic <dsimic@...jaro.org>, Viresh Kumar <viresh.kumar@...aro.org>, 
	Chen-Yu Tsai <wens@...nel.org>, devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, 
	linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 0/5] RK3588 and Rock 5B dts additions: thermal, OPP
 and fan

Hi,

On Thu, Feb 29, 2024 at 11:26:31PM +0400, Alexey Charkov wrote:
> This enables thermal monitoring and CPU DVFS on RK3588(s), as well as
> active cooling on Radxa Rock 5B via the provided PWM fan.
> 
> Some RK3588 boards use separate regulators to supply CPUs and their
> respective memory interfaces, so this is handled by coupling those
> regulators in affected boards' device trees to ensure that their
> voltage is adjusted in step.
> 
> In this revision of the series I chose to enable TSADC for all boards
> at .dtsi level, because:
>  - The defaults already in .dtsi should work for all users, given that
>    the CRU based resets don't need any out-of-chip components, and
>    the CRU vs. PMIC reset is pretty much the only thing a board might
>    have to configure / override there
>  - The boards that have TSADC_SHUT signal wired to the PMIC reset line
>    can still choose to override the reset logic in their .dts. Or stay
>    with CRU based resets, as downstream kernels do anyway
>  - The on-by-default approach helps ensure thermal protections are in
>    place (emergency reset and throttling) for any board even with a
>    rudimentary .dts, and thus lets us introduce CPU DVFS with better
>    peace of mind
> 
> Fan control on Rock 5B has been split into two intervals: let it spin
> at the minimum cooling state between 55C and 65C, and then accelerate
> if the system crosses the 65C mark - thanks to Dragan for suggesting.
> This lets some cooling setups with beefier heatsinks and/or larger
> fan fins to stay in the quietest non-zero fan state while still
> gaining potential benefits from the airflow it generates, and
> possibly avoiding noisy speeds altogether for some workloads.
> 
> OPPs help actually scale CPU frequencies up and down for both cooling
> and performance - tested on Rock 5B under varied loads. I've split
> the patch into two parts: the first containing those OPPs that seem
> to be no-regret with general consensus during v1 review [2], while
> the second contains OPPs that cause frequency reductions without
> accompanying decrease in CPU voltage. There seems to be a slight
> performance gain in some workload scenarios when using these, but
> previous discussion was inconclusive as to whether they should be
> included or not. Having them as separate patches enables easier
> comparison and partial reversion if people want to test it under
> their workloads, and also enables the first 'no-regret' part to be
> merged to -next while the jury is still out on the second one.
> 
> [1] https://lore.kernel.org/linux-rockchip/1824717.EqSB1tO5pr@bagend/T/#ma2ab949da2235a8e759eab22155fb2bc397d8aea
> [2] https://lore.kernel.org/linux-rockchip/CABjd4YxqarUCbZ-a2XLe3TWJ-qjphGkyq=wDnctnEhdoSdPPpw@mail.gmail.com/T/#m49d2b94e773f5b532a0bb5d3d7664799ff28cc2c
> 
> Signed-off-by: Alexey Charkov <alchark@...il.com>
> ---
> Changes in v3:
> - Added regulator coupling for EVB1 and QuartzPro64
> - Enabled the TSADC for all boards in .dtsi, not just Rock 5B (thanks ChenYu)
> - Added comments regarding two passive cooling trips in each zone (thanks Dragan)
> - Fixed active cooling map numbering for Radxa Rock 5B (thanks Dragan)
> - Dropped Daniel's Acked-by tag from the Rock 5B fan patch, as there's been quite some
>   churn there since the version he acknowledged
> - Link to v2: https://lore.kernel.org/r/20240130-rk-dts-additions-v2-0-c6222c4c78df@gmail.com
> 
> Changes in v2:
> - Dropped the rfkill patch which Heiko has already applied
> - Set higher 'polling-delay-passive' (100 instead of 20)
> - Name all cooling maps starting from map0 in each respective zone
> - Drop 'contribution' properties from passive cooling maps
> - Link to v1: https://lore.kernel.org/r/20240125-rk-dts-additions-v1-0-5879275db36f@gmail.com
> 
> ---
> Alexey Charkov (5):
>       arm64: dts: rockchip: enable built-in thermal monitoring on RK3588
>       arm64: dts: rockchip: enable automatic active cooling on Rock 5B
>       arm64: dts: rockchip: Add CPU/memory regulator coupling for RK3588
>       arm64: dts: rockchip: Add OPP data for CPU cores on RK3588
>       arm64: dts: rockchip: Add further granularity in RK3588 CPU OPPs
> 
>  arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts   |  12 +
>  .../arm64/boot/dts/rockchip/rk3588-quartzpro64.dts |  12 +
>  arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts    |  30 +-
>  arch/arm64/boot/dts/rockchip/rk3588s.dtsi          | 385 ++++++++++++++++++++-
>  4 files changed, 437 insertions(+), 2 deletions(-)

I'm too busy to have a detailed review of this series right now, but
I pushed it to our CI and it results in a board reset at boot time:

https://gitlab.collabora.com/hardware-enablement/rockchip-3588/linux/-/jobs/300950

I also pushed just the first three patches (i.e. without OPP /
cpufreq) and that boots fine:

https://gitlab.collabora.com/hardware-enablement/rockchip-3588/linux/-/jobs/300953

Note, that OPP / cpufreq works on the same boards in the CI when
using the ugly-and-not-for-upstream cpufreq driver:

https://gitlab.collabora.com/hardware-enablement/rockchip-3588/linux/-/commit/9c90c5032743a0419bf3fd2f914a24fd53101acd

My best guess right now is, that this is related to the generic
driver obviously not updating the GRF read margin registers.

Greetings,

-- Sebastian

Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)

Powered by blists - more mailing lists