| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240304123035.758700-5-andriy.shevchenko@linux.intel.com>
Date: Mon, 4 Mar 2024 14:27:05 +0200
From: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Florian Fainelli <florian.fainelli@...adcom.com>,
linux-kernel@...r.kernel.org,
linux-serial@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-aspeed@...ts.ozlabs.org,
linux-rpi-kernel@...ts.infradead.org,
linux-mips@...r.kernel.org,
linux-tegra@...r.kernel.org
Cc: Jiri Slaby <jirislaby@...nel.org>,
Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...econstruct.com.au>,
Broadcom internal kernel review list <bcm-kernel-feedback-list@...adcom.com>,
Ray Jui <rjui@...adcom.com>,
Scott Branden <sbranden@...adcom.com>,
Al Cooper <alcooperx@...il.com>,
Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>,
Paul Cercueil <paul@...pouillou.net>,
Vladimir Zapolskiy <vz@...ia.com>,
Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>,
Masami Hiramatsu <mhiramat@...nel.org>,
Andi Shyti <andi.shyti@...ux.intel.com>
Subject: [PATCH v3 04/14] serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties()
Since we have now a common helper to read port properties
use it instead of sparse home grown solution.
Reviewed-by: Andi Shyti <andi.shyti@...ux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Reviewed-by: Andrew Jeffery <andrew@...econstruct.com.au>
---
drivers/tty/serial/8250/8250_aspeed_vuart.c | 50 +++++++--------------
1 file changed, 15 insertions(+), 35 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_aspeed_vuart.c b/drivers/tty/serial/8250/8250_aspeed_vuart.c
index 8c2aaf7af7b7..53d8eee9b1c8 100644
--- a/drivers/tty/serial/8250/8250_aspeed_vuart.c
+++ b/drivers/tty/serial/8250/8250_aspeed_vuart.c
@@ -419,8 +419,8 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
struct aspeed_vuart *vuart;
struct device_node *np;
struct resource *res;
- u32 clk, prop, sirq[2];
int rc, sirq_polarity;
+ u32 prop, sirq[2];
struct clk *vclk;
np = pdev->dev.of_node;
@@ -447,53 +447,35 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
port.port.status = UPSTAT_SYNC_FIFO;
port.port.dev = &pdev->dev;
port.port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_8250_CONSOLE);
+ port.port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_FIXED_PORT | UPF_FIXED_TYPE |
+ UPF_NO_THRE_TEST;
port.bugs |= UART_BUG_TXRACE;
rc = sysfs_create_group(&vuart->dev->kobj, &aspeed_vuart_attr_group);
if (rc < 0)
return rc;
- if (of_property_read_u32(np, "clock-frequency", &clk)) {
+ rc = uart_read_port_properties(&port.port);
+ if (rc)
+ goto err_sysfs_remove;
+
+ /* Get clk rate through clk driver if present */
+ if (!port.port.uartclk) {
vclk = devm_clk_get_enabled(dev, NULL);
if (IS_ERR(vclk)) {
rc = dev_err_probe(dev, PTR_ERR(vclk), "clk or clock-frequency not defined\n");
goto err_sysfs_remove;
}
- clk = clk_get_rate(vclk);
+ port.port.uartclk = clk_get_rate(vclk);
}
/* If current-speed was set, then try not to change it. */
if (of_property_read_u32(np, "current-speed", &prop) == 0)
- port.port.custom_divisor = clk / (16 * prop);
+ port.port.custom_divisor = port.port.uartclk / (16 * prop);
- /* Check for shifted address mapping */
- if (of_property_read_u32(np, "reg-offset", &prop) == 0)
- port.port.mapbase += prop;
-
- /* Check for registers offset within the devices address range */
- if (of_property_read_u32(np, "reg-shift", &prop) == 0)
- port.port.regshift = prop;
-
- /* Check for fifo size */
- if (of_property_read_u32(np, "fifo-size", &prop) == 0)
- port.port.fifosize = prop;
-
- /* Check for a fixed line number */
- rc = of_alias_get_id(np, "serial");
- if (rc >= 0)
- port.port.line = rc;
-
- port.port.irq = irq_of_parse_and_map(np, 0);
port.port.handle_irq = aspeed_vuart_handle_irq;
- port.port.iotype = UPIO_MEM;
port.port.type = PORT_ASPEED_VUART;
- port.port.uartclk = clk;
- port.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF | UPF_IOREMAP
- | UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_NO_THRE_TEST;
-
- if (of_property_read_bool(np, "no-loopback-test"))
- port.port.flags |= UPF_SKIP_TEST;
if (port.port.fifosize)
port.capabilities = UART_CAP_FIFO;
@@ -503,7 +485,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
rc = serial8250_register_8250_port(&port);
if (rc < 0)
- goto err_clk_disable;
+ goto err_sysfs_remove;
vuart->line = rc;
vuart->port = serial8250_get_port(vuart->line);
@@ -529,7 +511,7 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
rc = aspeed_vuart_set_lpc_address(vuart, prop);
if (rc < 0) {
dev_err_probe(dev, rc, "invalid value in aspeed,lpc-io-reg property\n");
- goto err_clk_disable;
+ goto err_sysfs_remove;
}
rc = of_property_read_u32_array(np, "aspeed,lpc-interrupts", sirq, 2);
@@ -541,14 +523,14 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
rc = aspeed_vuart_set_sirq(vuart, sirq[0]);
if (rc < 0) {
dev_err_probe(dev, rc, "invalid sirq number in aspeed,lpc-interrupts property\n");
- goto err_clk_disable;
+ goto err_sysfs_remove;
}
sirq_polarity = aspeed_vuart_map_irq_polarity(sirq[1]);
if (sirq_polarity < 0) {
rc = dev_err_probe(dev, sirq_polarity,
"invalid sirq polarity in aspeed,lpc-interrupts property\n");
- goto err_clk_disable;
+ goto err_sysfs_remove;
}
aspeed_vuart_set_sirq_polarity(vuart, sirq_polarity);
@@ -559,8 +541,6 @@ static int aspeed_vuart_probe(struct platform_device *pdev)
return 0;
-err_clk_disable:
- irq_dispose_mapping(port.port.irq);
err_sysfs_remove:
sysfs_remove_group(&vuart->dev->kobj, &aspeed_vuart_attr_group);
return rc;
--
2.43.0.rc1.1.gbec44491f096
Powered by blists - more mailing lists