Message-ID: <CAHCN7xJ6uEghqDcUTKKQg7Lcg8uF55rz=vEHF=1xHRYfsDNGsA@mail.gmail.com>
Date: Tue, 5 Mar 2024 07:47:22 -0600
From: Adam Ford <aford173@...il.com>
To: Frank Binns <Frank.Binns@...tec.com>
Cc: "geert@...ux-m68k.org" <geert@...ux-m68k.org>, 
	"marek.vasut@...lbox.org" <marek.vasut@...lbox.org>, "tzimmermann@...e.de" <tzimmermann@...e.de>, 
	Matt Coster <Matt.Coster@...tec.com>, "javierm@...hat.com" <javierm@...hat.com>, 
	"dri-devel@...ts.freedesktop.org" <dri-devel@...ts.freedesktop.org>, 
	"linux-renesas-soc@...r.kernel.org" <linux-renesas-soc@...r.kernel.org>, "airlied@...il.com" <airlied@...il.com>, 
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>, "nm@...com" <nm@...com>, 
	"maarten.lankhorst@...ux.intel.com" <maarten.lankhorst@...ux.intel.com>, Sarah Walker <Sarah.Walker@...tec.com>, 
	"daniel@...ll.ch" <daniel@...ll.ch>, "mripard@...nel.org" <mripard@...nel.org>
Subject: Re: [PATCH v2] drm/imagination: DRM_POWERVR should depend on ARCH_K3

On Tue, Mar 5, 2024 at 5:58 AM Frank Binns <Frank.Binns@...tec.com> wrote:
>
> Hi Adam,
>
> Sorry for not responding sooner. I've recently just returned from paternity
> leave, so just catching up on everything.

Congratulations!

>
> On Thu, 2024-02-15 at 11:22 -0600, Adam Ford wrote:
> > On Thu, Feb 15, 2024 at 11:10 AM Adam Ford <aford173@...il.com> wrote:
> > > On Thu, Feb 15, 2024 at 10:54 AM Geert Uytterhoeven
> > > <geert@...ux-m68k.org> wrote:
> > > > Hi Maxime,
> > > >
> > > > On Thu, Feb 15, 2024 at 5:18 PM Maxime Ripard <mripard@...nel.org> wrote:
> > > > > On Thu, Feb 15, 2024 at 01:50:09PM +0100, Geert Uytterhoeven wrote:
> > > > > > Using the Imagination Technologies PowerVR Series 6 GPU requires a
> > > > > > proprietary firmware image, which is currently only available for Texas
> > > > > > Instruments K3 AM62x SoCs.  Hence add a dependency on ARCH_K3, to
> > > > > > prevent asking the user about this driver when configuring a kernel
> > > > > > without Texas Instruments K3 Multicore SoC support.
> > > > >
> > > > > This wasn't making sense the first time you sent it, and now that commit
> > > > > log is just plain wrong. We have firmwares for the G6110, GX6250,
> > > > > GX6650, BXE-4-32, and BXS-4-64 models, which can be found on (at least)
> > > > > Renesas, Mediatek, Rockchip, TI and StarFive, so across three
> > > >
> > > > I am so happy to be proven wrong!
> > > > Yeah, GX6650 is found on e.g. R-Car H3, and GX6250 on e.g. R-Car M3-W.
> > > >
> > > > > architectures and 5 platforms. In two months.
> > > >
> > > > That sounds like great progress, thanks a lot!
> > > >
> > > Geert,
> > >
> > > > Where can I find these firmwares? Linux-firmware[1] seems to lack all
> > > > but the original K3 AM62x one.
> > >
> > > I think PowerVR has a repo [1], but the last time I checked it, the
> > > BVNC for the firmware didn't match what was necessary for the GX6250
> > > on the RZ/G2M.  I can't remember what the corresponding R-Car3 model
> > > is.  I haven't tried recently because I was told more documentation
> > > for firmware porting would be delayed until everything was pushed into
> > > the kernel and Mesa.  Maybe there is a better repo and/or newer
> > > firmware somewhere else.
> > >
> > I should have doubled checked the repo contents before I sent my last
> > e-mail , but it appears the firmware  [2] for the RZ/G2M, might be
> > present now. I don't know if there are driver updates necessary. I
> > checked my e-mails, but I didn't see any notification, or I would have
> > tried it earlier.  Either way, thank you Frank for adding it.  I'll
> > try to test when I have some time.
> >
>
> You may have noticed from one of Matt's emails that we now have a set of repos
> (linux, linux-firmware and Mesa) in our own area on freedesktop.org GitLab:
> https://gitlab.freedesktop.org/imagination/
>
> We'll be using this as a staging area for work that isn't ready to be upstreamed
> yet (including firmware binaries).
>

I tried to play with these a little, but it seems like there is still
a fair amount of work to be done on the 6XT series. I tried to add the
device tree support for several Renesas boards, but the series was
NAK'd due to an inability to test it.
>
> > > adam
> > >
> > > [1] https://gitlab.freedesktop.org/frankbinns/linux-firmware/-/tree/powervr/powervr?ref_type=heads
> >
> > [2] - https://gitlab.freedesktop.org/frankbinns/linux-firmware/-/commit/fecb3caebf29f37221fe0a20236e5e1415d39d0b
> >
>
> This is now the place to get the firmware for devices that aren't yet supported
> upstream:
> https://gitlab.freedesktop.org/imagination/linux-firmware/-/commits/powervr/?ref_type=HEADS
>
I've been following several of these repos and checking for software
updates in both the Firmware, driver and userspace layers.

> With the firmware for the Renesas variant of GX6250 being found in this commit:
> https://gitlab.freedesktop.org/imagination/linux-firmware/-/commit/fecb3caebf29f37221fe0a20236e5e1415d39d0b
>

If your group thinks they have stuff they want tested, I am willing to
test them on the two platforms I have if I am CC'd on anything.

Thanks for the work your group has done so far.  It'll be nice to see the work.

adam

> Thanks
> Frank
>
> > >
> > > > Thanks again!
> > > >
> > > > [1] https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/
> > > >
> > > > Gr{oetje,eeting}s,
> > > >
> > > >                         Geert
> > > >
> > > > --
> > > > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org
> > > >
> > > > In personal conversations with technical people, I call myself a hacker. But
> > > > when I'm talking to journalists I just say "programmer" or something like that.
> > > >                                 -- Linus Torvalds

Powered by blists - more mailing lists