| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240305-inno-phy-v4-5-a03204c9cf1c@outlook.com>
Date: Tue, 05 Mar 2024 10:19:50 +0800
From: Yang Xiwen via B4 Relay <devnull+forbidden405.outlook.com@...nel.org>
To: Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Jiancheng Xue <xuejiancheng@...ilicon.com>,
Shawn Guo <shawn.guo@...aro.org>, Philipp Zabel <p.zabel@...gutronix.de>
Cc: linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Kishon Vijay Abraham I <kishon@...com>,
David Yang <mmyangfl@...il.com>, Yang Xiwen <forbidden405@...look.com>
Subject: [PATCH v4 5/5] phy: hisilicon: hisi-inno-phy: add support for
Hi3798MV200 INNO PHY
From: Yang Xiwen <forbidden405@...look.com>
Direct MMIO resgiter access is used by Hi3798MV200. For other models,
of_iomap() returns NULL due to insufficient length. So they are
unaffected.
Also Hi3798MV200 INNO PHY has an extra reset required to be deasserted,
switch to reset_control_bulk_() APIs for that.
Signed-off-by: Yang Xiwen <forbidden405@...look.com>
---
drivers/phy/hisilicon/phy-hisi-inno-usb2.c | 66 ++++++++++++++++++------------
1 file changed, 40 insertions(+), 26 deletions(-)
diff --git a/drivers/phy/hisilicon/phy-hisi-inno-usb2.c b/drivers/phy/hisilicon/phy-hisi-inno-usb2.c
index b7e740eb4752..a759823b5b1e 100644
--- a/drivers/phy/hisilicon/phy-hisi-inno-usb2.c
+++ b/drivers/phy/hisilicon/phy-hisi-inno-usb2.c
@@ -10,6 +10,7 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_address.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/reset.h>
@@ -24,6 +25,7 @@
#define PHY_TYPE_0 0
#define PHY_TYPE_1 1
+#define PHY_TYPE_MMIO 2
#define PHY_TEST_DATA GENMASK(7, 0)
#define PHY_TEST_ADDR_OFFSET 8
@@ -43,6 +45,7 @@
#define PHY_CLK_ENABLE BIT(2)
struct hisi_inno_phy_port {
+ void __iomem *base;
struct reset_control *utmi_rst;
struct hisi_inno_phy_priv *priv;
};
@@ -50,7 +53,7 @@ struct hisi_inno_phy_port {
struct hisi_inno_phy_priv {
void __iomem *mmio;
struct clk *ref_clk;
- struct reset_control *por_rst;
+ struct reset_control *rsts;
unsigned int type;
struct hisi_inno_phy_port ports[INNO_PHY_PORT_NUM];
};
@@ -62,26 +65,31 @@ static void hisi_inno_phy_write_reg(struct hisi_inno_phy_priv *priv,
u32 val;
u32 value;
- if (priv->type == PHY_TYPE_0)
- val = (data & PHY_TEST_DATA) |
- ((addr << PHY_TEST_ADDR_OFFSET) & PHY0_TEST_ADDR) |
- ((port << PHY0_TEST_PORT_OFFSET) & PHY0_TEST_PORT) |
- PHY0_TEST_WREN | PHY0_TEST_RST;
- else
- val = (data & PHY_TEST_DATA) |
- ((addr << PHY_TEST_ADDR_OFFSET) & PHY1_TEST_ADDR) |
- ((port << PHY1_TEST_PORT_OFFSET) & PHY1_TEST_PORT) |
- PHY1_TEST_WREN | PHY1_TEST_RST;
- writel(val, reg);
-
- value = val;
- if (priv->type == PHY_TYPE_0)
- value |= PHY0_TEST_CLK;
- else
- value |= PHY1_TEST_CLK;
- writel(value, reg);
-
- writel(val, reg);
+ if (priv->ports[port].base)
+ /* FIXME: fill stride in priv */
+ writel(data, (u32 *)priv->ports[port].base + addr);
+ else {
+ if (priv->type == PHY_TYPE_0)
+ val = (data & PHY_TEST_DATA) |
+ ((addr << PHY_TEST_ADDR_OFFSET) & PHY0_TEST_ADDR) |
+ ((port << PHY0_TEST_PORT_OFFSET) & PHY0_TEST_PORT) |
+ PHY0_TEST_WREN | PHY0_TEST_RST;
+ else
+ val = (data & PHY_TEST_DATA) |
+ ((addr << PHY_TEST_ADDR_OFFSET) & PHY1_TEST_ADDR) |
+ ((port << PHY1_TEST_PORT_OFFSET) & PHY1_TEST_PORT) |
+ PHY1_TEST_WREN | PHY1_TEST_RST;
+ writel(val, reg);
+
+ value = val;
+ if (priv->type == PHY_TYPE_0)
+ value |= PHY0_TEST_CLK;
+ else
+ value |= PHY1_TEST_CLK;
+ writel(value, reg);
+
+ writel(val, reg);
+ }
}
static void hisi_inno_phy_setup(struct hisi_inno_phy_priv *priv)
@@ -104,7 +112,7 @@ static int hisi_inno_phy_init(struct phy *phy)
return ret;
udelay(REF_CLK_STABLE_TIME);
- reset_control_deassert(priv->por_rst);
+ reset_control_deassert(priv->rsts);
udelay(POR_RST_COMPLETE_TIME);
/* Set up phy registers */
@@ -122,7 +130,7 @@ static int hisi_inno_phy_exit(struct phy *phy)
struct hisi_inno_phy_priv *priv = port->priv;
reset_control_assert(port->utmi_rst);
- reset_control_assert(priv->por_rst);
+ reset_control_assert(priv->rsts);
clk_disable_unprepare(priv->ref_clk);
return 0;
@@ -158,15 +166,16 @@ static int hisi_inno_phy_probe(struct platform_device *pdev)
if (IS_ERR(priv->ref_clk))
return PTR_ERR(priv->ref_clk);
- priv->por_rst = devm_reset_control_get_exclusive(dev, NULL);
- if (IS_ERR(priv->por_rst))
- return PTR_ERR(priv->por_rst);
+ priv->rsts = devm_reset_control_array_get(dev, false, false);
+ if (IS_ERR(priv->rsts))
+ return PTR_ERR(priv->rsts);
priv->type = (uintptr_t) of_device_get_match_data(dev);
for_each_child_of_node(np, child) {
struct reset_control *rst;
struct phy *phy;
+ void __iomem *base;
rst = of_reset_control_get_exclusive(child, NULL);
if (IS_ERR(rst)) {
@@ -174,7 +183,10 @@ static int hisi_inno_phy_probe(struct platform_device *pdev)
return PTR_ERR(rst);
}
+ base = of_iomap(child, 0);
+
priv->ports[i].utmi_rst = rst;
+ priv->ports[i].base = base;
priv->ports[i].priv = priv;
phy = devm_phy_create(dev, child, &hisi_inno_phy_ops);
@@ -205,6 +217,8 @@ static const struct of_device_id hisi_inno_phy_of_match[] = {
.data = (void *) PHY_TYPE_0 },
{ .compatible = "hisilicon,hi3798mv100-usb2-phy",
.data = (void *) PHY_TYPE_1 },
+ { .compatible = "hisilicon,hi3798mv200-usb2-phy",
+ .data = (void *) PHY_TYPE_MMIO },
{ },
};
MODULE_DEVICE_TABLE(of, hisi_inno_phy_of_match);
--
2.43.0
Powered by blists - more mailing lists