linux-kernel - Re: [PATCH v1] PM: runtime: PCI: Drain runtime-idle callbacks before driver removal

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20240305181425.GA541296@bhelgaas>
Date: Tue, 5 Mar 2024 12:14:25 -0600
From: Bjorn Helgaas <helgaas@...nel.org>
To: "Rafael J. Wysocki" <rjw@...ysocki.net>
Cc: Linux PCI <linux-pci@...r.kernel.org>,
	LKML <linux-kernel@...r.kernel.org>,
	Linux PM <linux-pm@...r.kernel.org>,
	"Rafael J. Wysocki" <rafael@...nel.org>,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Ricky Wu <ricky_wu@...ltek.com>,
	Kai-Heng Feng <kai.heng.feng@...onical.com>
Subject: Re: [PATCH v1] PM: runtime: PCI: Drain runtime-idle callbacks before
 driver removal

On Tue, Mar 05, 2024 at 11:45:38AM +0100, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
> 
> A race condition between the .runtime_idle() callback and the .remove()
> callback in the rtsx_pcr PCI driver leads to a kernel crash due to an
> unhandled page fault [1].
> 
> The problem is that rtsx_pci_runtime_idle() is not expected to be
> running after pm_runtime_get_sync() has been called, but the latter
> doesn't really guarantee that.  It only guarantees that the suspend
> and resume callbacks will not be running when it returns.
> 
> However, if a .runtime_idle() callback is already running when
> pm_runtime_get_sync() is called, the latter will notice that the
> runtime PM status of the device is RPM_ACTIVE and it will return right
> away without waiting for the former to complete.  In fact, it cannot
> wait for .runtime_idle() to complete because it may be called from that
> callback (it arguably does not make much sense to do that, but it is not
> strictly prohibited).
> 
> Thus in general, whoever is providing a .runtime_idle() callback, they
> need to protect it from running in parallel with whatever code runs
> after pm_runtime_get_sync().  [Note that .runtime_idle() will not start
> after pm_runtime_get_sync() has returned, but it may continue running
> then if it has started earlier already.]
> 
> One way to address that race condition is to call pm_runtime_barrier()
> after pm_runtime_get_sync() (not before it, because a nonzero value of
> the runtime PM usage counter is necessary to prevent runtime PM
> callbacks from being invoked) to wait for the runtime-idle callback to
> complete should it be running at that point.  A suitable place for
> doing that is in pci_device_remove() which calls pm_runtime_get_sync()
> before removing the driver, so it may as well call pm_runtime_barrier()
> subsequently, which will prevent the race in question from occurring,
> not just in the rtsx_pcr driver, but in any PCI drivers providing
> runtime-idle callbacks.
> 
> Link: https://lore.kernel.org/lkml/20240229062201.49500-1-kai.heng.feng@canonical.com/ # [1]
> Reported-by: Kai-Heng Feng <kai.heng.feng@...onical.com>
> Tested-by: Ricky Wu <ricky_wu@...ltek.com>
> Cc: All applicable <stable@...r.kernel.org>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@...el.com>

Applied with Kai-Feng's ack to pci/pm for v6.9, thank you very much!

> ---
>  drivers/pci/pci-driver.c |    7 +++++++
>  1 file changed, 7 insertions(+)
> 
> Index: linux-pm/drivers/pci/pci-driver.c
> ===================================================================
> --- linux-pm.orig/drivers/pci/pci-driver.c
> +++ linux-pm/drivers/pci/pci-driver.c
> @@ -473,6 +473,13 @@ static void pci_device_remove(struct dev
>  
>  	if (drv->remove) {
>  		pm_runtime_get_sync(dev);
> +		/*
> +		 * If the driver provides a .runtime_idle() callback and it has
> +		 * started to run already, it may continue to run in parallel
> +		 * with the code below, so wait until all of the runtime PM
> +		 * activity has completed.
> +		 */
> +		pm_runtime_barrier(dev);
>  		drv->remove(pci_dev);
>  		pm_runtime_put_noidle(dev);
>  	}
> 
> 
>