linux-kernel - [PATCH v1] PM: runtime: PCI: Drain runtime-idle callbacks before driver removal

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <5761426.DvuYhMxLoT@kreacher>
Date: Tue, 05 Mar 2024 11:45:38 +0100
From: "Rafael J. Wysocki" <rjw@...ysocki.net>
To: Linux PCI <linux-pci@...r.kernel.org>, Bjorn Helgaas <helgaas@...nel.org>
Cc: LKML <linux-kernel@...r.kernel.org>, Linux PM <linux-pm@...r.kernel.org>,
 "Rafael J. Wysocki" <rafael@...nel.org>,
 Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
 Ricky Wu <ricky_wu@...ltek.com>, Kai-Heng Feng <kai.heng.feng@...onical.com>
Subject:
 [PATCH v1] PM: runtime: PCI: Drain runtime-idle callbacks before driver
 removal

From: Rafael J. Wysocki <rafael.j.wysocki@...el.com>

A race condition between the .runtime_idle() callback and the .remove()
callback in the rtsx_pcr PCI driver leads to a kernel crash due to an
unhandled page fault [1].

The problem is that rtsx_pci_runtime_idle() is not expected to be
running after pm_runtime_get_sync() has been called, but the latter
doesn't really guarantee that.  It only guarantees that the suspend
and resume callbacks will not be running when it returns.

However, if a .runtime_idle() callback is already running when
pm_runtime_get_sync() is called, the latter will notice that the
runtime PM status of the device is RPM_ACTIVE and it will return right
away without waiting for the former to complete.  In fact, it cannot
wait for .runtime_idle() to complete because it may be called from that
callback (it arguably does not make much sense to do that, but it is not
strictly prohibited).

Thus in general, whoever is providing a .runtime_idle() callback, they
need to protect it from running in parallel with whatever code runs
after pm_runtime_get_sync().  [Note that .runtime_idle() will not start
after pm_runtime_get_sync() has returned, but it may continue running
then if it has started earlier already.]

One way to address that race condition is to call pm_runtime_barrier()
after pm_runtime_get_sync() (not before it, because a nonzero value of
the runtime PM usage counter is necessary to prevent runtime PM
callbacks from being invoked) to wait for the runtime-idle callback to
complete should it be running at that point.  A suitable place for
doing that is in pci_device_remove() which calls pm_runtime_get_sync()
before removing the driver, so it may as well call pm_runtime_barrier()
subsequently, which will prevent the race in question from occurring,
not just in the rtsx_pcr driver, but in any PCI drivers providing
runtime-idle callbacks.

Link: https://lore.kernel.org/lkml/20240229062201.49500-1-kai.heng.feng@canonical.com/ # [1]
Reported-by: Kai-Heng Feng <kai.heng.feng@...onical.com>
Tested-by: Ricky Wu <ricky_wu@...ltek.com>
Cc: All applicable <stable@...r.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
---
 drivers/pci/pci-driver.c |    7 +++++++
 1 file changed, 7 insertions(+)

Index: linux-pm/drivers/pci/pci-driver.c
===================================================================
--- linux-pm.orig/drivers/pci/pci-driver.c
+++ linux-pm/drivers/pci/pci-driver.c
@@ -473,6 +473,13 @@ static void pci_device_remove(struct dev

 	if (drv->remove) {
 		pm_runtime_get_sync(dev);
+		/*
+		 * If the driver provides a .runtime_idle() callback and it has
+		 * started to run already, it may continue to run in parallel
+		 * with the code below, so wait until all of the runtime PM
+		 * activity has completed.
+		 */
+		pm_runtime_barrier(dev);
 		drv->remove(pci_dev);
 		pm_runtime_put_noidle(dev);
 	}