| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20240305123648.8847-1-shreeya.patel@collabora.com>
Date: Tue, 5 Mar 2024 18:06:42 +0530
From: Shreeya Patel <shreeya.patel@...labora.com>
To: heiko@...ech.de,
mchehab@...nel.org,
robh@...nel.org,
krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org,
mturquette@...libre.com,
sboyd@...nel.org,
p.zabel@...gutronix.de,
jose.abreu@...opsys.com,
nelson.costa@...opsys.com,
dmitry.osipenko@...labora.com,
sebastian.reichel@...labora.com,
shawn.wen@...k-chips.com,
nicolas.dufresne@...labora.com,
hverkuil@...all.nl,
hverkuil-cisco@...all.nl
Cc: kernel@...labora.com,
linux-kernel@...r.kernel.org,
linux-media@...r.kernel.org,
devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org,
linux-clk@...r.kernel.org,
linux-arm@...ts.infradead.org,
Shreeya Patel <shreeya.patel@...labora.com>
Subject: [PATCH v2 0/6] Add Synopsys DesignWare HDMI RX Controller
This series implements support for the Synopsys DesignWare
HDMI RX Controller, being compliant with standard HDMI 1.4b
and HDMI 2.0.
Features that are currently supported by the HDMI RX driver
have been tested on rock5b board using a HDMI to micro-HDMI cable.
It is recommended to use a good quality cable as there were
multiple issues seen during testing the driver.
Please note the below information :-
* While testing the driver on rock5b we noticed that the binary BL31
from Rockchip contains some unknown code to get the HDMI-RX PHY
access working. With TF-A BL31, the HDMI-RX PHY doesn't work as
expected since there are no interrupts seen for rk_hdmirx-hdmi
leading to some failures in the driver [0].
* We have tested the working of OBS studio with HDMIRX driver and
there were no issues seen.
[0] https://gitlab.collabora.com/hardware-enablement/rockchip-3588/trusted-firmware-a/-/issues/1
To test the HDMI RX Controller driver, following example commands can be used :-
root@...ian-rockchip-rock5b-rk3588:~# v4l2-ctl --verbose -d /dev/video0 \
--set-fmt-video=width=1920,height=1080,pixelformat='BGR3' --stream-mmap=4 \
--stream-skip=3 --stream-count=100 --stream-to=/home/hdmiin4k.raw --stream-poll
root@...ian-rockchip-rock5b-rk3588:~# ffmpeg -f rawvideo -vcodec rawvideo \
-s 1920x1080 -r 60 -pix_fmt bgr24 -i /home/hdmiin4k.raw output.mkv
Following is the v4l2-compliance test result :-
root@...ian-rockchip-rock5b-rk3588:~# v4l2-compliance -d /dev/video0
v4l2-compliance 1.27.0-5174, 64 bits, 64-bit time_t
v4l2-compliance SHA: d700deb14368 2024-01-18 12:19:05
Compliance test for snps_hdmirx device /dev/video0:
Driver Info:
Driver name : snps_hdmirx
Card type : snps_hdmirx
Bus info : platform: snps_hdmirx
Driver version : 6.8.0
Capabilities : 0x84201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04201000
Video Capture Multiplanar
Streaming
Extended Pix Format
Required ioctls:
test VIDIOC_QUERYCAP: OK
test invalid ioctls: OK
Allow for multiple opens:
test second /dev/video0 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 1 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK
test VIDIOC_DV_TIMINGS_CAP: OK
test VIDIOC_G/S_EDID: OK
Control ioctls (Input 0):
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 2 Private Controls: 0
Format ioctls (Input 0):
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls (Input 0):
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls (Input 0):
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test CREATE_BUFS maximum buffers: OK
test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported)
Total for snps_hdmirx device /dev/video0: 46, Succeeded: 46, Failed: 0, Warnings: 0
Changes in v2 :-
- Fix checkpatch --strict warnings
- Move the dt-binding include file changes in a separate patch
- Add a description for the hardware in the dt-bindings file
- Rename resets, vo1 grf and HPD properties
- Add a proper description for grf and vo1-grf phandles in the
bindings
- Rename the HDMI RX node name to hdmi-receiver
- Include gpio header file in binding example to fix the
dt_binding_check failure
- Move hdmirx_cma node to the rk3588.dtsi file
- Add an entry to MAINTAINERS file for the HDMIRX driver
Shreeya Patel (6):
dt-bindings: reset: Define reset id used for HDMI Receiver
clk: rockchip: rst-rk3588: Add reset line for HDMI Receiver
dt-bindings: media: Document HDMI RX Controller
arm64: dts: rockchip: Add device tree support for HDMI RX Controller
media: platform: synopsys: Add support for hdmi input driver
MAINTAINERS: Add entry for Synopsys DesignWare HDMI RX Driver
.../bindings/media/snps,dw-hdmi-rx.yaml | 132 +
MAINTAINERS | 8 +
.../boot/dts/rockchip/rk3588-pinctrl.dtsi | 41 +
arch/arm64/boot/dts/rockchip/rk3588.dtsi | 55 +
drivers/clk/rockchip/rst-rk3588.c | 1 +
drivers/media/platform/Kconfig | 1 +
drivers/media/platform/Makefile | 1 +
drivers/media/platform/synopsys/Kconfig | 3 +
drivers/media/platform/synopsys/Makefile | 2 +
.../media/platform/synopsys/hdmirx/Kconfig | 18 +
.../media/platform/synopsys/hdmirx/Makefile | 4 +
.../platform/synopsys/hdmirx/snps_hdmirx.c | 2856 +++++++++++++++++
.../platform/synopsys/hdmirx/snps_hdmirx.h | 393 +++
.../synopsys/hdmirx/snps_hdmirx_cec.c | 289 ++
.../synopsys/hdmirx/snps_hdmirx_cec.h | 46 +
.../dt-bindings/reset/rockchip,rk3588-cru.h | 2 +
16 files changed, 3852 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml
create mode 100644 drivers/media/platform/synopsys/Kconfig
create mode 100644 drivers/media/platform/synopsys/Makefile
create mode 100644 drivers/media/platform/synopsys/hdmirx/Kconfig
create mode 100644 drivers/media/platform/synopsys/hdmirx/Makefile
create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx.c
create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx.h
create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx_cec.c
create mode 100644 drivers/media/platform/synopsys/hdmirx/snps_hdmirx_cec.h
--
2.39.2
Powered by blists - more mailing lists