linux-kernel - Re: [PATCH v2 2/4] arm64: dts: qcom: ipq6018: add 1.5GHz CPU Frequency

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date: Wed,  6 Mar 2024 23:40:33 +0800
From: Chukun Pan <amadeus@....edu.cn>
To: dmitry.baryshkov@...aro.org
Cc: amadeus@....edu.cn,
	andersson@...nel.org,
	conor+dt@...nel.org,
	devicetree@...r.kernel.org,
	konrad.dybcio@...aro.org,
	krzysztof.kozlowski+dt@...aro.org,
	linux-arm-msm@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	robh@...nel.org
Subject: Re: [PATCH v2 2/4] arm64: dts: qcom: ipq6018: add 1.5GHz CPU Frequency

Hi, Dmitry
> After this patch non-PMIC IPQ6000 boardss are broken until patch3 is
> applied. Please change the order of these patches.

This is not the case, please see `opp-supported-hw = <0x2>;`.
Also: https://github.com/torvalds/linux/blob/master/drivers/cpufreq/qcom-cpufreq-nvmem.c#L334
This 1.5GHz Frequency only takes effect when the fuse value is `2'b1`.
I have tested this patch on both fused 1.2GHz and 1.5GHz devices.

Thanks,
Chukun

-- 
2.25.1