[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZejDQddMp17RD6Yk@lizhi-Precision-Tower-5810>
Date: Wed, 6 Mar 2024 14:25:53 -0500
From: Frank Li <Frank.li@....com>
To: Conor Dooley <conor@...nel.org>
Cc: Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
Shengjiu Wang <shengjiu.wang@....com>, linux-sound@...r.kernel.org,
devicetree@...r.kernel.org, imx@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 3/4] ASoC: dt-bindings: fsl-sai: allow only one
dma-names
On Wed, Mar 06, 2024 at 06:45:13PM +0000, Conor Dooley wrote:
> On Tue, Mar 05, 2024 at 12:33:04PM -0500, Frank Li wrote:
> > Some sai only connect one direction dma (rx/tx) in SOC. For example:
> > imx8qxp sai5 only connect tx dma channel. So allow only one "rx" or "tx"
> > for dma-names.
> >
> > Remove description under dmas because no user use index to get dma channel.
> > All user use 'dma-names' to get correct dma channel. dma-names already in
> > 'required' list.
>
> Acked-by: Conor Dooley <conor.dooley@...rochip.com>
>
> > Signed-off-by: Frank Li <Frank.Li@....com>
> > ---
> > Documentation/devicetree/bindings/sound/fsl,sai.yaml | 13 ++++++-------
> > 1 file changed, 6 insertions(+), 7 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/sound/fsl,sai.yaml b/Documentation/devicetree/bindings/sound/fsl,sai.yaml
> > index 2456d958adeef..6f551c68d33db 100644
> > --- a/Documentation/devicetree/bindings/sound/fsl,sai.yaml
> > +++ b/Documentation/devicetree/bindings/sound/fsl,sai.yaml
> > @@ -81,15 +81,14 @@ properties:
> >
> > dmas:
> > minItems: 1
> > - items:
> > - - description: DMA controller phandle and request line for RX
> > - - description: DMA controller phandle and request line for TX
> > + maxItems: 2
> >
> > dma-names:
> > - minItems: 1
> > - items:
> > - - const: rx
> > - - const: tx
> > + oneOf:
> > + - items:
> > + - const: rx
> > + - const: tx
> > + - enum: [ rx, tx ]
>
> I'm not entirely sure if this was Rob's suggestion, I got the impression
> he was suggesting that in the two items case we'd not care about the
> order. But while I think this is different to that suggestion it's also
> not wrong.
I log this at cover-letter. b4 can't support write change log at every
patch yet. Rob's suggest was not work. dt-binding check complain too long
if there are two dma-names = "rx", "tx".
Frank
>
> Thanks,
> Conor.
Powered by blists - more mailing lists