| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <2177674.irdbgypaU6@steina-w>
Date: Wed, 06 Mar 2024 08:20:00 +0100
From: Alexander Stein <alexander.stein@...tq-group.com>
To: Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>, Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>, Sascha Hauer <s.hauer@...gutronix.de>, Pengutronix Kernel Team <kernel@...gutronix.de>, Fabio Estevam <festevam@...il.com>, Shengjiu Wang <shengjiu.wang@....com>, linux-arm-kernel@...ts.infradead.org, Frank Li <Frank.Li@....com>
Cc: linux-sound@...r.kernel.org, devicetree@...r.kernel.org, imx@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org, Frank Li <Frank.Li@....com>
Subject: Re: [PATCH v4 4/4] arm64: dts: imx8qxp: add asrc[0, 1], esai0, spdif[0, 1] and sai[4, 5]
Hi Frank,
thanks for the patch.
Am Dienstag, 5. März 2024, 18:33:05 CET schrieb Frank Li:
> Add asrc[0,1], esai0, spdif[0,1], sai[4,5] and related lpcg node for
> imx8 audio subsystem.
>
> Signed-off-by: Frank Li <Frank.Li@....com>
> ---
> arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi | 304 +++++++++++++++++++++++
> 1 file changed, 304 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
> index 07afeb78ed564..78305559f15c9 100644
> --- a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
> @@ -6,6 +6,7 @@
>
> #include <dt-bindings/clock/imx8-clock.h>
> #include <dt-bindings/clock/imx8-lpcg.h>
> +#include <dt-bindings/dma/fsl-edma.h>
> #include <dt-bindings/firmware/imx/rsrc.h>
>
> audio_ipg_clk: clock-audio-ipg {
> @@ -481,4 +482,307 @@ acm: acm@...00000 {
> "sai3_rx_bclk",
> "sai4_rx_bclk";
> };
> +
> + asrc0: asrc@...00000 {
Please insert nodes sorted by address. ASRC0 is the very first node.
> + compatible = "fsl,imx8qm-asrc";
> + reg = <0x59000000 0x10000>;
> + interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&asrc0_lpcg 0>,
> + <&asrc0_lpcg 0>,
> + <&aud_pll_div0_lpcg 0>,
> + <&aud_pll_div1_lpcg 0>,
> + <&acm IMX_ADMA_ACM_AUD_CLK0_SEL>,
> + <&acm IMX_ADMA_ACM_AUD_CLK1_SEL>,
> + <&clk_dummy>,
> + <&clk_dummy>,
> + <&clk_dummy>,
> + <&clk_dummy>,
> + <&clk_dummy>,
> + <&clk_dummy>,
> + <&clk_dummy>,
> + <&clk_dummy>,
> + <&clk_dummy>,
> + <&clk_dummy>,
> + <&clk_dummy>,
> + <&clk_dummy>,
> + <&clk_dummy>;
> + clock-names = "mem", "ipg",
> + "asrck_0", "asrck_1", "asrck_2", "asrck_3",
> + "asrck_4", "asrck_5", "asrck_6", "asrck_7",
> + "asrck_8", "asrck_9", "asrck_a", "asrck_b",
> + "asrck_c", "asrck_d", "asrck_e", "asrck_f",
> + "spba";
> + dmas = <&edma0 0 0 0>,
> + <&edma0 1 0 0>,
> + <&edma0 2 0 0>,
> + <&edma0 3 0 FSL_EDMA_RX>,
> + <&edma0 4 0 FSL_EDMA_RX>,
> + <&edma0 5 0 FSL_EDMA_RX>;
> + /* tx* is output channel of asrc, it is rx channel for eDMA */
> + dma-names = "rxa", "rxb", "rxc", "txa", "txb", "txc";
> + fsl,asrc-rate = <8000>;
> + fsl,asrc-width = <16>;
> + fsl,asrc-clk-map = <0>;
> + power-domains = <&pd IMX_SC_R_ASRC_0>;
> + status = "disabled";
> + };
> +
> + esai0: esai@...10000 {
> + compatible = "fsl,imx8qm-esai", "fsl,imx6ull-esai";
> + reg = <0x59010000 0x10000>;
> + interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&esai0_lpcg 1>, <&esai0_lpcg 0>, <&esai0_lpcg 1>, <&clk_dummy>;
> + clock-names = "core", "extal", "fsys", "spba";
> + dmas = <&edma0 6 0 FSL_EDMA_RX>, <&edma0 7 0 0>;
> + dma-names = "rx", "tx";
> + power-domains = <&pd IMX_SC_R_ESAI_0>;
> + status = "disabled";
> + };
> +
> + spdif0: spdif@...20000 {
> + compatible = "fsl,imx8qm-spdif";
> + reg = <0x59020000 0x10000>;
> + interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>, /* rx */
> + <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>; /* tx */
> + clocks = <&spdif0_lpcg 1>, /* core */
> + <&clk_dummy>, /* rxtx0 */
> + <&spdif0_lpcg 0>, /* rxtx1 */
> + <&clk_dummy>, /* rxtx2 */
> + <&clk_dummy>, /* rxtx3 */
> + <&clk_dummy>, /* rxtx4 */
> + <&audio_ipg_clk>, /* rxtx5 */
> + <&clk_dummy>, /* rxtx6 */
> + <&clk_dummy>, /* rxtx7 */
> + <&clk_dummy>; /* spba */
> + clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3", "rxtx4",
> + "rxtx5", "rxtx6", "rxtx7", "spba";
> + dmas = <&edma0 8 0 (FSL_EDMA_MULTI_FIFO | FSL_EDMA_RX)>,
> + <&edma0 9 0 FSL_EDMA_MULTI_FIFO>;
> + dma-names = "rx", "tx";
> + power-domains = <&pd IMX_SC_R_SPDIF_0>;
> + status = "disabled";
> + };
> +
> + spdif1: spdif@...30000 {
That's imx8qm only, no?
> + compatible = "fsl,imx8qm-spdif";
> + reg = <0x59030000 0x10000>;
> + interrupts = <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>, /* rx */
> + <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; /* tx */
> + clocks = <&spdif1_lpcg 1>, /* core */
> + <&clk_dummy>, /* rxtx0 */
> + <&spdif1_lpcg 0>, /* rxtx1 */
> + <&clk_dummy>, /* rxtx2 */
> + <&clk_dummy>, /* rxtx3 */
> + <&clk_dummy>, /* rxtx4 */
> + <&audio_ipg_clk>, /* rxtx5 */
> + <&clk_dummy>, /* rxtx6 */
> + <&clk_dummy>, /* rxtx7 */
> + <&clk_dummy>; /* spba */
> + clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3", "rxtx4",
> + "rxtx5", "rxtx6", "rxtx7", "spba";
> + dmas = <&edma0 10 0 (FSL_EDMA_MULTI_FIFO | FSL_EDMA_RX)>,
> + <&edma0 11 0 FSL_EDMA_MULTI_FIFO>;
> + dma-names = "rx", "tx";
> + power-domains = <&pd IMX_SC_R_SPDIF_1>;
> + status = "disabled";
> + };
> +
> + asrc1: asrc@...00000 {
Insert this between dsp and edma1, sorted by address.
> + compatible = "fsl,imx8qm-asrc";
> + reg = <0x59800000 0x10000>;
> + interrupts = <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&asrc1_lpcg 0>,
> + <&asrc1_lpcg 0>,
> + <&aud_pll_div0_lpcg 0>,
> + <&aud_pll_div1_lpcg 0>,
> + <&acm IMX_ADMA_ACM_AUD_CLK0_SEL>,
> + <&acm IMX_ADMA_ACM_AUD_CLK1_SEL>,
> + <&clk_dummy>,
> + <&clk_dummy>,
> + <&clk_dummy>,
> + <&clk_dummy>,
> + <&clk_dummy>,
> + <&clk_dummy>,
> + <&clk_dummy>,
> + <&clk_dummy>,
> + <&clk_dummy>,
> + <&clk_dummy>,
> + <&clk_dummy>,
> + <&clk_dummy>,
> + <&clk_dummy>;
> + clock-names = "mem", "ipg",
> + "asrck_0", "asrck_1", "asrck_2", "asrck_3",
> + "asrck_4", "asrck_5", "asrck_6", "asrck_7",
> + "asrck_8", "asrck_9", "asrck_a", "asrck_b",
> + "asrck_c", "asrck_d", "asrck_e", "asrck_f",
> + "spba";
> + dmas = <&edma1 0 0 0>,
> + <&edma1 1 0 0>,
> + <&edma1 2 0 0>,
> + <&edma1 3 0 FSL_EDMA_RX>,
> + <&edma1 4 0 FSL_EDMA_RX>,
> + <&edma1 5 0 FSL_EDMA_RX>;
> + /* tx* is output channel of asrc, it is rx channel for eDMA */
> + dma-names = "rxa", "rxb", "rxc", "txa", "txb", "txc";
> + fsl,asrc-rate = <8000>;
> + fsl,asrc-width = <16>;
> + fsl,asrc-clk-map = <1>;
> + power-domains = <&pd IMX_SC_R_ASRC_1>;
> + status = "disabled";
> + };
> +
> + sai4: sai@...20000 {
> + compatible = "fsl,imx8qm-sai";
> + reg = <0x59820000 0x10000>;
> + interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&sai4_lpcg 1>,
> + <&clk_dummy>,
> + <&sai4_lpcg 0>,
> + <&clk_dummy>,
> + <&clk_dummy>;
> + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
> + dmas = <&edma1 8 0 FSL_EDMA_RX>, <&edma1 9 0 0>;
> + dma-names = "rx", "tx";
> + power-domains = <&pd IMX_SC_R_SAI_4>;
> + status = "disabled";
> + };
> +
> + sai5: sai@...30000 {
> + compatible = "fsl,imx8qm-sai";
> + reg = <0x59830000 0x10000>;
> + interrupts = <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&sai5_lpcg 1>,
> + <&clk_dummy>,
> + <&sai5_lpcg 0>,
> + <&clk_dummy>,
> + <&clk_dummy>;
> + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
> + dmas = <&edma1 10 0 0>;
> + dma-names = "tx";
> + power-domains = <&pd IMX_SC_R_SAI_5>;
> + status = "disabled";
> + };
> +
> + amix: amix@...40000 {
> + compatible = "fsl,imx8qm-audmix";
> + reg = <0x59840000 0x10000>;
> + clocks = <&amix_lpcg 0>;
> + clock-names = "ipg";
> + power-domains = <&pd IMX_SC_R_AMIX>;
> + dais = <&sai4>, <&sai5>;
> + status = "disabled";
> + };
> +
> + mqs: mqs@...50000 {
> + compatible = "fsl,imx8qm-mqs";
> + reg = <0x59850000 0x10000>;
> + clocks = <&mqs0_lpcg 0>,
> + <&mqs0_lpcg 1>;
> + clock-names = "mclk", "core";
> + power-domains = <&pd IMX_SC_R_MQS_0>;
> + status = "disabled";
> + };
> +
> + asrc0_lpcg: clock-controller@...00000 {
Please insert he lpcg nodes according to their address.
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x59400000 0x10000>;
> + #clock-cells = <1>;
> + clocks = <&audio_ipg_clk>;
> + clock-indices = <IMX_LPCG_CLK_4>;
> + clock-output-names = "asrc0_lpcg_ipg_clk";
> + power-domains = <&pd IMX_SC_R_ASRC_0>;
> + };
> +
> + esai0_lpcg: clock-controller@...10000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x59410000 0x10000>;
> + #clock-cells = <1>;
> + clocks = <&acm IMX_ADMA_ACM_ESAI0_MCLK_SEL>,
> + <&audio_ipg_clk>;
> + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> + clock-output-names = "esai0_lpcg_extal_clk",
> + "esai0_lpcg_ipg_clk";
> + power-domains = <&pd IMX_SC_R_ESAI_0>;
> + };
> +
> + spdif0_lpcg: clock-controller@...20000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x59420000 0x10000>;
> + #clock-cells = <1>;
> + clocks = <&acm IMX_ADMA_ACM_SPDIF0_TX_CLK_SEL>,
> + <&audio_ipg_clk>;
> + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> + clock-output-names = "spdif0_lpcg_tx_clk",
> + "spdif0_lpcg_gclkw";
> + power-domains = <&pd IMX_SC_R_SPDIF_0>;
> + };
> +
> + spdif1_lpcg: clock-controller@...30000 {
That's imx8qm only as well, no?
Thanks and best regards,
Alexander
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x59430000 0x10000>;
> + #clock-cells = <1>;
> + clocks = <&acm IMX_ADMA_ACM_SPDIF1_TX_CLK_SEL>,
> + <&audio_ipg_clk>;
> + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> + clock-output-names = "spdif1_lpcg_tx_clk",
> + "spdif1_lpcg_gclkw";
> + power-domains = <&pd IMX_SC_R_SPDIF_1>;
> + status = "disabled";
> + };
> +
> + asrc1_lpcg: clock-controller@...00000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x59c00000 0x10000>;
> + #clock-cells = <1>;
> + clocks = <&audio_ipg_clk>;
> + clock-indices = <IMX_LPCG_CLK_4>;
> + clock-output-names = "asrc1_lpcg_ipg_clk";
> + power-domains = <&pd IMX_SC_R_ASRC_1>;
> + };
> +
> + sai4_lpcg: clock-controller@...20000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x59c20000 0x10000>;
> + #clock-cells = <1>;
> + clocks = <&acm IMX_ADMA_ACM_SAI4_MCLK_SEL>,
> + <&audio_ipg_clk>;
> + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> + clock-output-names = "sai4_lpcg_mclk",
> + "sai4_lpcg_ipg_clk";
> + power-domains = <&pd IMX_SC_R_SAI_4>;
> + };
> +
> + sai5_lpcg: clock-controller@...30000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x59c30000 0x10000>;
> + #clock-cells = <1>;
> + clocks = <&acm IMX_ADMA_ACM_SAI5_MCLK_SEL>,
> + <&audio_ipg_clk>;
> + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> + clock-output-names = "sai5_lpcg_mclk",
> + "sai5_lpcg_ipg_clk";
> + power-domains = <&pd IMX_SC_R_SAI_5>;
> + };
> +
> + amix_lpcg: clock-controller@...40000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x59c40000 0x10000>;
> + #clock-cells = <1>;
> + clocks = <&audio_ipg_clk>;
> + clock-indices = <IMX_LPCG_CLK_0>;
> + clock-output-names = "amix_lpcg_ipg_clk";
> + power-domains = <&pd IMX_SC_R_AMIX>;
> + };
> +
> + mqs0_lpcg: clock-controller@...50000 {
> + compatible = "fsl,imx8qxp-lpcg";
> + reg = <0x59c50000 0x10000>;
> + #clock-cells = <1>;
> + clocks = <&acm IMX_ADMA_ACM_MQS_TX_CLK_SEL>,
> + <&audio_ipg_clk>;
> + clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
> + clock-output-names = "mqs0_lpcg_mclk",
> + "mqs0_lpcg_ipg_clk";
> + power-domains = <&pd IMX_SC_R_MQS_0>;
> + };
> };
>
>
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
Powered by blists - more mailing lists