| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 7 Mar 2024 02:08:14 +0800
From: Weitao Wang <WeitaoWang-oc@...oxin.com>
To: <oneukum@...e.com>, <stern@...land.harvard.edu>,
<gregkh@...uxfoundation.org>, <linux-usb@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-scsi@...r.kernel.org>,
<usb-storage@...ts.one-eyed-alien.net>
CC: <WeitaoWang@...oxin.com>, <stable@...r.kernel.org>
Subject: [PATCH v4] USB:UAS:return ENODEV when submit urbs fail with device not attached
In the scenario of entering hibernation with udisk in the system, if the
udisk was gone or resume fail in the thaw phase of hibernation. Its state
will be set to NOTATTACHED. At this point, usb_hub_wq was already freezed
and can't not handle disconnect event. Next, in the poweroff phase of
hibernation, SYNCHRONIZE_CACHE SCSI command will be sent to this udisk
when poweroff this scsi device, which will cause uas_submit_urbs to be
called to submit URB for sense/data/cmd pipe. However, these URBs will
submit fail as device was set to NOTATTACHED state. Then, uas_submit_urbs
will return a value SCSI_MLQUEUE_DEVICE_BUSY to the caller. That will lead
the SCSI layer go into an ugly loop and system fail to go into hibernation.
On the other hand, when we specially check for -ENODEV in function
uas_queuecommand_lck, returning DID_ERROR to SCSI layer will cause device
poweroff fail and system shutdown instead of entering hibernation.
To fix this issue, let uas_submit_urbs to return original generic error
when submitting URB failed. At the same time, we need to translate -ENODEV
to DID_NOT_CONNECT for the SCSI layer.
Suggested-by: Oliver Neukum <oneukum@...e.com>
Cc: stable@...r.kernel.org
Signed-off-by: Weitao Wang <WeitaoWang-oc@...oxin.com>
---
v3->v4
- remove unused variable declaration in function uas_submit_urbs.
drivers/usb/storage/uas.c | 28 +++++++++++++---------------
1 file changed, 13 insertions(+), 15 deletions(-)
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 9707f53cfda9..5930cfc03111 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -533,7 +533,7 @@ static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp,
* daft to me.
*/
-static struct urb *uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp)
+static int uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp)
{
struct uas_dev_info *devinfo = cmnd->device->hostdata;
struct urb *urb;
@@ -541,30 +541,28 @@ static struct urb *uas_submit_sense_urb(struct scsi_cmnd *cmnd, gfp_t gfp)
urb = uas_alloc_sense_urb(devinfo, gfp, cmnd);
if (!urb)
- return NULL;
+ return -ENOMEM;
usb_anchor_urb(urb, &devinfo->sense_urbs);
err = usb_submit_urb(urb, gfp);
if (err) {
usb_unanchor_urb(urb);
uas_log_cmd_state(cmnd, "sense submit err", err);
usb_free_urb(urb);
- return NULL;
}
- return urb;
+ return err;
}
static int uas_submit_urbs(struct scsi_cmnd *cmnd,
struct uas_dev_info *devinfo)
{
struct uas_cmd_info *cmdinfo = scsi_cmd_priv(cmnd);
- struct urb *urb;
int err;
lockdep_assert_held(&devinfo->lock);
if (cmdinfo->state & SUBMIT_STATUS_URB) {
- urb = uas_submit_sense_urb(cmnd, GFP_ATOMIC);
- if (!urb)
- return SCSI_MLQUEUE_DEVICE_BUSY;
+ err = uas_submit_sense_urb(cmnd, GFP_ATOMIC);
+ if (err)
+ return err;
cmdinfo->state &= ~SUBMIT_STATUS_URB;
}
@@ -572,7 +570,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
cmdinfo->data_in_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC,
cmnd, DMA_FROM_DEVICE);
if (!cmdinfo->data_in_urb)
- return SCSI_MLQUEUE_DEVICE_BUSY;
+ return -ENOMEM;
cmdinfo->state &= ~ALLOC_DATA_IN_URB;
}
@@ -582,7 +580,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
if (err) {
usb_unanchor_urb(cmdinfo->data_in_urb);
uas_log_cmd_state(cmnd, "data in submit err", err);
- return SCSI_MLQUEUE_DEVICE_BUSY;
+ return err;
}
cmdinfo->state &= ~SUBMIT_DATA_IN_URB;
cmdinfo->state |= DATA_IN_URB_INFLIGHT;
@@ -592,7 +590,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
cmdinfo->data_out_urb = uas_alloc_data_urb(devinfo, GFP_ATOMIC,
cmnd, DMA_TO_DEVICE);
if (!cmdinfo->data_out_urb)
- return SCSI_MLQUEUE_DEVICE_BUSY;
+ return -ENOMEM;
cmdinfo->state &= ~ALLOC_DATA_OUT_URB;
}
@@ -602,7 +600,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
if (err) {
usb_unanchor_urb(cmdinfo->data_out_urb);
uas_log_cmd_state(cmnd, "data out submit err", err);
- return SCSI_MLQUEUE_DEVICE_BUSY;
+ return err;
}
cmdinfo->state &= ~SUBMIT_DATA_OUT_URB;
cmdinfo->state |= DATA_OUT_URB_INFLIGHT;
@@ -611,7 +609,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
if (cmdinfo->state & ALLOC_CMD_URB) {
cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, GFP_ATOMIC, cmnd);
if (!cmdinfo->cmd_urb)
- return SCSI_MLQUEUE_DEVICE_BUSY;
+ return -ENOMEM;
cmdinfo->state &= ~ALLOC_CMD_URB;
}
@@ -621,7 +619,7 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd,
if (err) {
usb_unanchor_urb(cmdinfo->cmd_urb);
uas_log_cmd_state(cmnd, "cmd submit err", err);
- return SCSI_MLQUEUE_DEVICE_BUSY;
+ return err;
}
cmdinfo->cmd_urb = NULL;
cmdinfo->state &= ~SUBMIT_CMD_URB;
@@ -698,7 +696,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd)
* of queueing, no matter how fatal the error
*/
if (err == -ENODEV) {
- set_host_byte(cmnd, DID_ERROR);
+ set_host_byte(cmnd, DID_NO_CONNECT);
scsi_done(cmnd);
goto zombie;
}
--
2.32.0
Powered by blists - more mailing lists