linux-kernel - [PATCH v4 2/5] PCI: dwc: Skip finding eDMA channels count for HDMA platforms

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20240306-dw-hdma-v4-2-9fed506e95be@linaro.org>
Date: Wed, 06 Mar 2024 15:51:58 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: Jingoo Han <jingoohan1@...il.com>, 
 Gustavo Pimentel <gustavo.pimentel@...opsys.com>, 
 Lorenzo Pieralisi <lpieralisi@...nel.org>, 
 Krzysztof Wilczyński <kw@...ux.com>, 
 Rob Herring <robh@...nel.org>, Bjorn Helgaas <bhelgaas@...gle.com>, 
 Marek Vasut <marek.vasut+renesas@...il.com>, 
 Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>, 
 Kishon Vijay Abraham I <kishon@...nel.org>
Cc: Serge Semin <fancer.lancer@...il.com>, linux-pci@...r.kernel.org, 
 linux-kernel@...r.kernel.org, linux-renesas-soc@...r.kernel.org, 
 linux-arm-msm@...r.kernel.org, mhi@...ts.linux.dev, 
 Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>, 
 Siddharth Vadapalli <s-vadapalli@...com>, Frank Li <Frank.Li@....com>
Subject: [PATCH v4 2/5] PCI: dwc: Skip finding eDMA channels count for HDMA
 platforms

In the case of Hyper DMA (HDMA) present in DWC controllers, there is no way
the drivers can auto detect the number of read/write channels as like its
predecessor embedded DMA (eDMA). So the glue drivers making use of HDMA
have to pass the channels count during probe.

To accommodate that, let's skip the existing auto detection of channels
count procedure for HDMA based platforms. If the channels count passed by
the glue drivers were wrong in any form, then the existing sanity check
will catch it.

Suggested-by: Serge Semin <fancer.lancer@...il.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@...com>
Reviewed-by: Frank Li <Frank.Li@....com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
---
 drivers/pci/controller/dwc/pcie-designware.c | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 3a26dfc5368f..599991b7ffb2 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -927,13 +927,18 @@ static int dw_pcie_edma_find_channels(struct dw_pcie *pci)
 {
 	u32 val;
 
-	if (pci->edma.mf == EDMA_MF_EDMA_LEGACY)
-		val = dw_pcie_readl_dbi(pci, PCIE_DMA_VIEWPORT_BASE + PCIE_DMA_CTRL);
-	else
+	/*
+	 * Autodetect the read/write channels count only for non-HDMA platforms.
+	 * HDMA platforms doesn't support autodetect, so the glue drivers should've
+	 * passed the valid count already. If not, the below sanity check will
+	 * catch it.
+	 */
+	if (pci->edma.mf != EDMA_MF_HDMA_NATIVE) {
 		val = dw_pcie_readl_dma(pci, PCIE_DMA_CTRL);
 
-	pci->edma.ll_wr_cnt = FIELD_GET(PCIE_DMA_NUM_WR_CHAN, val);
-	pci->edma.ll_rd_cnt = FIELD_GET(PCIE_DMA_NUM_RD_CHAN, val);
+		pci->edma.ll_wr_cnt = FIELD_GET(PCIE_DMA_NUM_WR_CHAN, val);
+		pci->edma.ll_rd_cnt = FIELD_GET(PCIE_DMA_NUM_RD_CHAN, val);
+	}
 
 	/* Sanity check the channels count if the mapping was incorrect */
 	if (!pci->edma.ll_wr_cnt || pci->edma.ll_wr_cnt > EDMA_MAX_WR_CH ||

-- 
2.25.1