[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20240307024034.1548605-4-gnstark@salutedevices.com>
Date: Thu, 7 Mar 2024 05:40:27 +0300
From: George Stark <gnstark@...utedevices.com>
To: <andy.shevchenko@...il.com>, <pavel@....cz>, <lee@...nel.org>,
<vadimp@...dia.com>, <mpe@...erman.id.au>, <npiggin@...il.com>,
<christophe.leroy@...roup.eu>, <hdegoede@...hat.com>,
<mazziesaccount@...il.com>, <peterz@...radead.org>, <mingo@...hat.com>,
<will@...nel.org>, <longman@...hat.com>, <boqun.feng@...il.com>,
<nikitos.tr@...il.com>, <kabel@...nel.org>
CC: <linux-leds@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linuxppc-dev@...ts.ozlabs.org>, <kernel@...utedevices.com>, George Stark
<gnstark@...utedevices.com>, Nikita Travkin <nikita@...n.ru>
Subject: [PATCH v5 03/10] leds: aw2013: use devm API to cleanup module's resources
In this driver LEDs are registered using devm_led_classdev_register()
so they are automatically unregistered after module's remove() is done.
led_classdev_unregister() calls module's led_set_brightness() to turn off
the LEDs and that callback uses resources which were destroyed already
in module's remove() so use devm API instead of remove().
Signed-off-by: George Stark <gnstark@...utedevices.com>
Tested-by: Nikita Travkin <nikita@...n.ru>
---
drivers/leds/leds-aw2013.c | 25 +++++++++++++------------
1 file changed, 13 insertions(+), 12 deletions(-)
diff --git a/drivers/leds/leds-aw2013.c b/drivers/leds/leds-aw2013.c
index 17235a5e576a..6475eadcb0df 100644
--- a/drivers/leds/leds-aw2013.c
+++ b/drivers/leds/leds-aw2013.c
@@ -320,6 +320,11 @@ static int aw2013_probe_dt(struct aw2013 *chip)
return 0;
}
+static void aw2013_chip_disable_action(void *data)
+{
+ aw2013_chip_disable(data);
+}
+
static const struct regmap_config aw2013_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -336,7 +341,10 @@ static int aw2013_probe(struct i2c_client *client)
if (!chip)
return -ENOMEM;
- mutex_init(&chip->mutex);
+ ret = devm_mutex_init(&client->dev, &chip->mutex);
+ if (ret)
+ return ret;
+
mutex_lock(&chip->mutex);
chip->client = client;
@@ -384,6 +392,10 @@ static int aw2013_probe(struct i2c_client *client)
goto error_reg;
}
+ ret = devm_add_action(&client->dev, aw2013_chip_disable_action, chip);
+ if (ret)
+ goto error_reg;
+
ret = aw2013_probe_dt(chip);
if (ret < 0)
goto error_reg;
@@ -406,19 +418,9 @@ static int aw2013_probe(struct i2c_client *client)
error:
mutex_unlock(&chip->mutex);
- mutex_destroy(&chip->mutex);
return ret;
}
-static void aw2013_remove(struct i2c_client *client)
-{
- struct aw2013 *chip = i2c_get_clientdata(client);
-
- aw2013_chip_disable(chip);
-
- mutex_destroy(&chip->mutex);
-}
-
static const struct of_device_id aw2013_match_table[] = {
{ .compatible = "awinic,aw2013", },
{ /* sentinel */ },
@@ -432,7 +434,6 @@ static struct i2c_driver aw2013_driver = {
.of_match_table = aw2013_match_table,
},
.probe = aw2013_probe,
- .remove = aw2013_remove,
};
module_i2c_driver(aw2013_driver);
--
2.25.1
Powered by blists - more mailing lists