| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <d558343480a78b53ac419ce67fc9f13d631672a4.1709922929.git.thomas.lendacky@amd.com>
Date: Fri, 8 Mar 2024 12:35:16 -0600
From: Tom Lendacky <thomas.lendacky@....com>
To: <linux-kernel@...r.kernel.org>, <x86@...nel.org>
CC: Thomas Gleixner <tglx@...utronix.de>, Ingo Molnar <mingo@...hat.com>,
Borislav Petkov <bp@...en8.de>, Dave Hansen <dave.hansen@...ux.intel.com>,
"H. Peter Anvin" <hpa@...or.com>, Andy Lutomirski <luto@...nel.org>, "Peter
Zijlstra" <peterz@...radead.org>, Dan Williams <dan.j.williams@...el.com>,
Michael Roth <michael.roth@....com>, Ashish Kalra <ashish.kalra@....com>
Subject: [PATCH v2 01/14] x86/sev: Rename snp_init() in the boot/compressed/sev.c file
The snp_init() function is local to the boot/compressed/sev.c file and is
not called from outside of the file. Change the name so that it is not
tied to the function definition in arch/x86/include/asm/sev.h. Move the
renamed snp_init() and related functions up in the file to avoid having to
add a forward declaration and make the function static, too.
This will allow the snp_init() function in arch/x86/kernel/sev.c to be
changed without having to make the same change in boot/compressed/sev.c.
Signed-off-by: Tom Lendacky <thomas.lendacky@....com>
---
arch/x86/boot/compressed/sev.c | 162 ++++++++++++++++-----------------
1 file changed, 81 insertions(+), 81 deletions(-)
diff --git a/arch/x86/boot/compressed/sev.c b/arch/x86/boot/compressed/sev.c
index ec71846d28c9..bec0bbfc6403 100644
--- a/arch/x86/boot/compressed/sev.c
+++ b/arch/x86/boot/compressed/sev.c
@@ -413,6 +413,85 @@ void snp_check_features(void)
}
}
+/* Search for Confidential Computing blob in the EFI config table. */
+static struct cc_blob_sev_info *find_cc_blob_efi(struct boot_params *bp)
+{
+ unsigned long cfg_table_pa;
+ unsigned int cfg_table_len;
+ int ret;
+
+ ret = efi_get_conf_table(bp, &cfg_table_pa, &cfg_table_len);
+ if (ret)
+ return NULL;
+
+ return (struct cc_blob_sev_info *)efi_find_vendor_table(bp, cfg_table_pa,
+ cfg_table_len,
+ EFI_CC_BLOB_GUID);
+}
+
+/*
+ * Initial set up of SNP relies on information provided by the
+ * Confidential Computing blob, which can be passed to the boot kernel
+ * by firmware/bootloader in the following ways:
+ *
+ * - via an entry in the EFI config table
+ * - via a setup_data structure, as defined by the Linux Boot Protocol
+ *
+ * Scan for the blob in that order.
+ */
+static struct cc_blob_sev_info *find_cc_blob(struct boot_params *bp)
+{
+ struct cc_blob_sev_info *cc_info;
+
+ cc_info = find_cc_blob_efi(bp);
+ if (cc_info)
+ goto found_cc_info;
+
+ cc_info = find_cc_blob_setup_data(bp);
+ if (!cc_info)
+ return NULL;
+
+found_cc_info:
+ if (cc_info->magic != CC_BLOB_SEV_HDR_MAGIC)
+ sev_es_terminate(SEV_TERM_SET_GEN, GHCB_SNP_UNSUPPORTED);
+
+ return cc_info;
+}
+
+/*
+ * Indicate SNP based on presence of SNP-specific CC blob. Subsequent checks
+ * will verify the SNP CPUID/MSR bits.
+ */
+static bool snp_setup(struct boot_params *bp)
+{
+ struct cc_blob_sev_info *cc_info;
+
+ if (!bp)
+ return false;
+
+ cc_info = find_cc_blob(bp);
+ if (!cc_info)
+ return false;
+
+ /*
+ * If a SNP-specific Confidential Computing blob is present, then
+ * firmware/bootloader have indicated SNP support. Verifying this
+ * involves CPUID checks which will be more reliable if the SNP
+ * CPUID table is used. See comments over snp_setup_cpuid_table() for
+ * more details.
+ */
+ setup_cpuid_table(cc_info);
+
+ /*
+ * Pass run-time kernel a pointer to CC info via boot_params so EFI
+ * config table doesn't need to be searched again during early startup
+ * phase.
+ */
+ bp->cc_blob_address = (u32)(unsigned long)cc_info;
+
+ return true;
+}
+
/*
* sev_check_cpu_support - Check for SEV support in the CPU capabilities
*
@@ -463,7 +542,7 @@ void sev_enable(struct boot_params *bp)
bp->cc_blob_address = 0;
/*
- * Do an initial SEV capability check before snp_init() which
+ * Do an initial SEV capability check before snp_setup() which
* loads the CPUID page and the same checks afterwards are done
* without the hypervisor and are trustworthy.
*
@@ -478,7 +557,7 @@ void sev_enable(struct boot_params *bp)
* Setup/preliminary detection of SNP. This will be sanity-checked
* against CPUID/MSR values later.
*/
- snp = snp_init(bp);
+ snp = snp_setup(bp);
/* Now repeat the checks with the SNP CPUID table. */
@@ -535,85 +614,6 @@ u64 sev_get_status(void)
return m.q;
}
-/* Search for Confidential Computing blob in the EFI config table. */
-static struct cc_blob_sev_info *find_cc_blob_efi(struct boot_params *bp)
-{
- unsigned long cfg_table_pa;
- unsigned int cfg_table_len;
- int ret;
-
- ret = efi_get_conf_table(bp, &cfg_table_pa, &cfg_table_len);
- if (ret)
- return NULL;
-
- return (struct cc_blob_sev_info *)efi_find_vendor_table(bp, cfg_table_pa,
- cfg_table_len,
- EFI_CC_BLOB_GUID);
-}
-
-/*
- * Initial set up of SNP relies on information provided by the
- * Confidential Computing blob, which can be passed to the boot kernel
- * by firmware/bootloader in the following ways:
- *
- * - via an entry in the EFI config table
- * - via a setup_data structure, as defined by the Linux Boot Protocol
- *
- * Scan for the blob in that order.
- */
-static struct cc_blob_sev_info *find_cc_blob(struct boot_params *bp)
-{
- struct cc_blob_sev_info *cc_info;
-
- cc_info = find_cc_blob_efi(bp);
- if (cc_info)
- goto found_cc_info;
-
- cc_info = find_cc_blob_setup_data(bp);
- if (!cc_info)
- return NULL;
-
-found_cc_info:
- if (cc_info->magic != CC_BLOB_SEV_HDR_MAGIC)
- sev_es_terminate(SEV_TERM_SET_GEN, GHCB_SNP_UNSUPPORTED);
-
- return cc_info;
-}
-
-/*
- * Indicate SNP based on presence of SNP-specific CC blob. Subsequent checks
- * will verify the SNP CPUID/MSR bits.
- */
-bool snp_init(struct boot_params *bp)
-{
- struct cc_blob_sev_info *cc_info;
-
- if (!bp)
- return false;
-
- cc_info = find_cc_blob(bp);
- if (!cc_info)
- return false;
-
- /*
- * If a SNP-specific Confidential Computing blob is present, then
- * firmware/bootloader have indicated SNP support. Verifying this
- * involves CPUID checks which will be more reliable if the SNP
- * CPUID table is used. See comments over snp_setup_cpuid_table() for
- * more details.
- */
- setup_cpuid_table(cc_info);
-
- /*
- * Pass run-time kernel a pointer to CC info via boot_params so EFI
- * config table doesn't need to be searched again during early startup
- * phase.
- */
- bp->cc_blob_address = (u32)(unsigned long)cc_info;
-
- return true;
-}
-
void sev_prep_identity_maps(unsigned long top_level_pgt)
{
/*
--
2.43.2
Powered by blists - more mailing lists