| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <47a83f766c85481b73c6e6dd3759d4d9.sboyd@kernel.org>
Date: Fri, 08 Mar 2024 18:11:11 -0800
From: Stephen Boyd <sboyd@...nel.org>
To: Chen Wang <unicornxw@...il.com>, aou@...s.berkeley.edu, chao.wei@...hgo.com, conor@...nel.org, devicetree@...r.kernel.org, guoren@...nel.org, haijiao.liu@...hgo.com, inochiama@...look.com, jszhang@...nel.org, krzysztof.kozlowski+dt@...aro.org, linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org, linux-riscv@...ts.infradead.org, mturquette@...libre.com, palmer@...belt.com, paul.walmsley@...ive.com, richardcochran@...il.com, robh+dt@...nel.org, samuel.holland@...ive.com, xiaoguang.xing@...hgo.com
Cc: Chen Wang <unicorn_wang@...look.com>
Subject: Re: [PATCH v11 4/5] clk: sophgo: Add SG2042 clock driver
Quoting Chen Wang (2024-02-19 19:09:53)
> diff --git a/drivers/clk/sophgo/Kconfig b/drivers/clk/sophgo/Kconfig
> new file mode 100644
> index 000000000000..feab0b805a29
> --- /dev/null
> +++ b/drivers/clk/sophgo/Kconfig
> @@ -0,0 +1,8 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +config CLK_SOPHGO_SG2042
> + bool "Sophgo SG2042 clock support"
> + depends on ARCH_SOPHGO || COMPILE_TEST
> + default y
Please drop this line. I was going to suggest 'default ARCH_SOPHGO' but
really just set the config in the defconfig if you want to enable it.
> + help
> + Say yes here to support the clock controller on the Sophgo SG2042 SoC.
> diff --git a/drivers/clk/sophgo/clk-sophgo-sg2042.c b/drivers/clk/sophgo/clk-sophgo-sg2042.c
> new file mode 100644
> index 000000000000..91ea84042ce0
> --- /dev/null
> +++ b/drivers/clk/sophgo/clk-sophgo-sg2042.c
> @@ -0,0 +1,1401 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Sophgo SG2042 Clock Generator Driver
> + *
> + * Copyright (C) 2023 Sophgo Technology Inc. All rights reserved.
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/mfd/syscon.h>
Is this used?
> +#include <linux/of_address.h>
> +#include <linux/platform_device.h>
This include needs to be used. Please use a platform driver.
> +#include <linux/slab.h>
regmap include is missing. Are there others?
> +
> +/*
> + * The clock of SG2042 is composed of three parts.
> + * The registers of these three parts of the clock are scattered in three
> + * different memory address spaces:
> + * - pll clocks
> + * - gate clocks for RP subsystem
> + * - div/mux, and gate clocks working for other subsystem than RP subsystem
> + */
> +#include <dt-bindings/clock/sophgo,sg2042-pll.h>
> +#include <dt-bindings/clock/sophgo,sg2042-rpgate.h>
> +#include <dt-bindings/clock/sophgo,sg2042-clkgen.h>
> +
> +#include "clk-sophgo-sg2042.h"
> +
> +#define KHZ 1000UL
> +#define MHZ (KHZ * KHZ)
> +
> +#define REFDIV_MIN 1
> +#define REFDIV_MAX 63
> +#define FBDIV_MIN 16
> +#define FBDIV_MAX 320
> +
> +#define PLL_FREF_SG2042 (25 * MHZ)
> +
> +#define PLL_FOUTPOSTDIV_MIN (16 * MHZ)
> +#define PLL_FOUTPOSTDIV_MAX (3200 * MHZ)
> +
> +#define PLL_FOUTVCO_MIN (800 * MHZ)
> +#define PLL_FOUTVCO_MAX (3200 * MHZ)
> +
> +struct sg2042_pll_ctrl {
> + unsigned long freq;
> + unsigned int fbdiv;
> + unsigned int postdiv1;
> + unsigned int postdiv2;
> + unsigned int refdiv;
> +};
> +
> +#define PLLCTRL_FBDIV_SHIFT 16
> +#define PLLCTRL_FBDIV_MASK (GENMASK(27, 16) >> PLLCTRL_FBDIV_SHIFT)
> +#define PLLCTRL_POSTDIV2_SHIFT 12
> +#define PLLCTRL_POSTDIV2_MASK (GENMASK(14, 12) >> PLLCTRL_POSTDIV2_SHIFT)
> +#define PLLCTRL_POSTDIV1_SHIFT 8
> +#define PLLCTRL_POSTDIV1_MASK (GENMASK(10, 8) >> PLLCTRL_POSTDIV1_SHIFT)
> +#define PLLCTRL_REFDIV_SHIFT 0
> +#define PLLCTRL_REFDIV_MASK (GENMASK(5, 0) >> PLLCTRL_REFDIV_SHIFT)
> +
> +static inline u32 sg2042_pll_ctrl_encode(struct sg2042_pll_ctrl *ctrl)
> +{
> + return (((ctrl->fbdiv & PLLCTRL_FBDIV_MASK) << PLLCTRL_FBDIV_SHIFT) |
Remove extra parenthesis please.
> + ((ctrl->postdiv2 & PLLCTRL_POSTDIV2_MASK) << PLLCTRL_POSTDIV2_SHIFT) |
> + ((ctrl->postdiv1 & PLLCTRL_POSTDIV1_MASK) << PLLCTRL_POSTDIV1_SHIFT) |
> + ((ctrl->refdiv & PLLCTRL_REFDIV_MASK) << PLLCTRL_REFDIV_SHIFT));
> +}
> +
> +static inline void sg2042_pll_ctrl_decode(unsigned int reg_value,
> + struct sg2042_pll_ctrl *ctrl)
> +{
> + ctrl->fbdiv = (reg_value >> PLLCTRL_FBDIV_SHIFT) & PLLCTRL_FBDIV_MASK;
> + ctrl->refdiv = (reg_value >> PLLCTRL_REFDIV_SHIFT) & PLLCTRL_REFDIV_MASK;
> + ctrl->postdiv1 = (reg_value >> PLLCTRL_POSTDIV1_SHIFT) & PLLCTRL_POSTDIV1_MASK;
> + ctrl->postdiv2 = (reg_value >> PLLCTRL_POSTDIV2_SHIFT) & PLLCTRL_POSTDIV2_MASK;
> +}
> +
> +static inline int sg2042_pll_enable(struct sg2042_pll_clock *pll, bool en)
> +{
> + unsigned int value = 0;
> + struct regmap *map = pll->map;
> +
> + if (en) {
> + /* wait pll lock */
> + if (regmap_read_poll_timeout_atomic(map,
> + pll->offset_status,
> + value,
> + ((value >> pll->shift_status_lock) & 0x1),
> + 0,
> + 100000))
> + pr_warn("%s not locked\n", pll->name);
> +
> + /* wait pll updating */
> + if (regmap_read_poll_timeout_atomic(map,
> + pll->offset_status,
> + value,
> + !((value >> pll->shift_status_updating) & 0x1),
> + 0,
> + 100000))
> + pr_warn("%s still updating\n", pll->name);
> +
> + /* enable pll */
> + regmap_read(map, pll->offset_enable, &value);
> + regmap_write(map, pll->offset_enable, value | (1 << pll->shift_enable));
> + } else {
> + /* disable pll */
> + regmap_read(map, pll->offset_enable, &value);
> + regmap_write(map, pll->offset_enable, value & (~(1 << pll->shift_enable)));
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * @reg_value: current register value
> + * @parent_rate: parent frequency
> + *
> + * This function is used to calculate below "rate" in equation
> + * rate = (parent_rate/REFDIV) x FBDIV/POSTDIV1/POSTDIV2
> + * = (parent_rate x FBDIV) / (REFDIV x POSTDIV1 x POSTDIV2)
> + */
> +static unsigned long sg2042_pll_recalc_rate(unsigned int reg_value,
> + unsigned long parent_rate)
> +{
> + struct sg2042_pll_ctrl ctrl_table;
> + u64 rate, numerator, denominator;
> +
> + sg2042_pll_ctrl_decode(reg_value, &ctrl_table);
> +
> + numerator = parent_rate * ctrl_table.fbdiv;
> + denominator = ctrl_table.refdiv * ctrl_table.postdiv1 * ctrl_table.postdiv2;
> + do_div(numerator, denominator);
> + rate = numerator;
> +
> + return rate;
> +}
> +
> +/*
> + * Below array is the total combination lists of POSTDIV1 and POSTDIV2
> + * for example:
> + * postdiv1_2[0] = {2, 4, 8}
> + * ==> div1 = 2, div2 = 4 , div1 * div2 = 8
> + * And POSTDIV_RESULT_INDEX point to 3rd element in the array
> + */
> +#define POSTDIV_RESULT_INDEX 2
> +static int postdiv1_2[][3] = {
const? And move it to the function scope.
> + {2, 4, 8}, {3, 3, 9}, {2, 5, 10}, {2, 6, 12},
> + {2, 7, 14}, {3, 5, 15}, {4, 4, 16}, {3, 6, 18},
> + {4, 5, 20}, {3, 7, 21}, {4, 6, 24}, {5, 5, 25},
> + {4, 7, 28}, {5, 6, 30}, {5, 7, 35}, {6, 6, 36},
> + {6, 7, 42}, {7, 7, 49}
It may be better to make it a struct with named members because I have
no idea what each element means.
> +};
> +
> +/*
> + * Based on input rate/prate/fbdiv/refdiv, look up the postdiv1_2 table
> + * to get the closest postdiiv combination.
> + * @rate: FOUTPOSTDIV
> + * @prate: parent rate, i.e. FREF
> + * @fbdiv: FBDIV
> + * @refdiv: REFDIV
> + * @postdiv1: POSTDIV1, output
> + * @postdiv2: POSTDIV2, output
> + * See TRM:
> + * FOUTPOSTDIV = FREF * FBDIV / REFDIV / (POSTDIV1 * POSTDIV2)
> + * So we get following formula to get POSTDIV1 and POSTDIV2:
> + * POSTDIV = (prate/REFDIV) x FBDIV/rate
> + * above POSTDIV = POSTDIV1*POSTDIV2
> + */
> +static int sg2042_pll_get_postdiv_1_2(unsigned long rate,
> + unsigned long prate,
> + unsigned int fbdiv,
> + unsigned int refdiv,
> + unsigned int *postdiv1,
> + unsigned int *postdiv2)
> +{
> + int index = 0;
Drop useless initializations.
> + u64 tmp0;
> +
> + /* prate/REFDIV and result save to tmp0 */
> + tmp0 = prate;
> + do_div(tmp0, refdiv);
> +
> + /* ((prate/REFDIV) x FBDIV) and result save to tmp0 */
> + tmp0 *= fbdiv;
> +
> + /* ((prate/REFDIV) x FBDIV)/rate and result save to tmp0 */
> + do_div(tmp0, rate);
> +
> + /* tmp0 is POSTDIV1*POSTDIV2, now we calculate div1 and div2 value */
> + if (tmp0 <= 7) {
> + /* (div1 * div2) <= 7, no need to use array search */
> + *postdiv1 = tmp0;
> + *postdiv2 = 1;
> + return 0;
> + }
> +
> + /* (div1 * div2) > 7, use array search */
> + for (index = 0; index < ARRAY_SIZE(postdiv1_2); index++) {
> + if (tmp0 > postdiv1_2[index][POSTDIV_RESULT_INDEX]) {
> + continue;
> + } else {
> + /* found it */
> + *postdiv1 = postdiv1_2[index][1];
> + *postdiv2 = postdiv1_2[index][0];
> + return 0;
> + }
> + }
> + pr_warn("%s can not find in postdiv array!\n", __func__);
> + return -EINVAL;
> +}
> +
> +/*
> + * Based on the given FOUTPISTDIV and the input FREF to calculate
> + * the REFDIV/FBDIV/PSTDIV1/POSTDIV2 combination for pllctrl register.
> + * @req_rate: expected output clock rate, i.e. FOUTPISTDIV
> + * @parent_rate: input parent clock rate, i.e. FREF
> + * @best: output to hold calculated combination of REFDIV/FBDIV/PSTDIV1/POSTDIV2
> + */
> +static int sg2042_get_pll_ctl_setting(struct sg2042_pll_ctrl *best,
> + unsigned long req_rate,
> + unsigned long parent_rate)
> +{
> + int ret;
> + unsigned int fbdiv, refdiv, postdiv1, postdiv2;
> + unsigned long foutpostdiv;
> + u64 tmp;
> + u64 foutvco;
> +
> + if (parent_rate != PLL_FREF_SG2042) {
> + pr_alert("INVALID FREF: %ld\n", parent_rate);
Why alert instead of error?
> + return -EINVAL;
> + }
> +
> + if (req_rate < PLL_FOUTPOSTDIV_MIN || req_rate > PLL_FOUTPOSTDIV_MAX) {
> + pr_alert("INVALID FOUTPOSTDIV: %ld\n", req_rate);
> + return -EINVAL;
> + }
> +
> + memset(best, 0, sizeof(struct sg2042_pll_ctrl));
> +
> + for (refdiv = REFDIV_MIN; refdiv < REFDIV_MAX + 1; refdiv++) {
> + /* required by hardware: FREF/REFDIV must > 10 */
> + tmp = parent_rate;
> + do_div(tmp, refdiv);
> + if (tmp <= 10)
> + continue;
> +
> + for (fbdiv = FBDIV_MIN; fbdiv < FBDIV_MAX + 1; fbdiv++) {
> + /*
> + * FOUTVCO = FREF*FBDIV/REFDIV validation
> + * required by hardware, FOUTVCO must [800MHz, 3200MHz]
> + */
> + foutvco = parent_rate * fbdiv;
> + do_div(foutvco, refdiv);
> + if (foutvco < PLL_FOUTVCO_MIN || foutvco > PLL_FOUTVCO_MAX)
> + continue;
> +
> + ret = sg2042_pll_get_postdiv_1_2(req_rate, parent_rate,
> + fbdiv, refdiv,
> + &postdiv1, &postdiv2);
> + if (ret)
> + continue;
> +
> + /*
> + * FOUTPOSTDIV = FREF*FBDIV/REFDIV/(POSTDIV1*POSTDIV2)
> + * = FOUTVCO/(POSTDIV1*POSTDIV2)
> + */
> + tmp = foutvco;
> + do_div(tmp, (postdiv1 * postdiv2));
> + foutpostdiv = (unsigned long)tmp;
> + /* Iterative to approach the expected value */
> + if (abs_diff(foutpostdiv, req_rate) <
> + abs_diff(best->freq, req_rate)) {
Make the above two lines one line please.
> + best->freq = foutpostdiv;
> + best->refdiv = refdiv;
> + best->fbdiv = fbdiv;
> + best->postdiv1 = postdiv1;
> + best->postdiv2 = postdiv2;
> + if (foutpostdiv == req_rate)
> + return 0;
> + }
> + continue;
> + }
> + }
> +
> + if (best->freq == 0)
> + return -EINVAL;
> + else
> + return 0;
> +}
> +
> +/*
> + * @hw: ccf use to hook get sg2042_pll_clock
> + * @parent_rate: parent rate
> + *
> + * The is function will be called through clk_get_rate
> + * and return current rate after decoding reg value
> + */
> +static unsigned long sg2042_clk_pll_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + unsigned int value;
> + unsigned long rate;
> + struct sg2042_pll_clock *pll = to_sg2042_pll_clk(hw);
> +
> + regmap_read(pll->map, pll->offset_ctrl, &value);
> + rate = sg2042_pll_recalc_rate(value, parent_rate);
> +
> + pr_debug("--> %s: pll_recalc_rate: val = %ld\n",
> + clk_hw_get_name(hw), rate);
> + return rate;
> +}
> +
> +static long sg2042_clk_pll_round_rate(struct clk_hw *hw,
> + unsigned long req_rate,
> + unsigned long *prate)
> +{
> + unsigned int value;
> + struct sg2042_pll_ctrl pctrl_table;
> + long proper_rate;
> + int ret;
> +
> + ret = sg2042_get_pll_ctl_setting(&pctrl_table, req_rate, *prate);
> + if (ret) {
> + proper_rate = 0;
> + goto out;
> + }
> +
> + value = sg2042_pll_ctrl_encode(&pctrl_table);
> + proper_rate = (long)sg2042_pll_recalc_rate(value, *prate);
> +
> +out:
> + pr_debug("--> %s: pll_round_rate: val = %ld\n",
> + clk_hw_get_name(hw), proper_rate);
> + return proper_rate;
> +}
> +
> +static int sg2042_clk_pll_determine_rate(struct clk_hw *hw,
> + struct clk_rate_request *req)
> +{
> + req->rate = sg2042_clk_pll_round_rate(hw, min(req->rate, req->max_rate),
> + &req->best_parent_rate);
> + pr_debug("--> %s: pll_determine_rate: val = %ld\n",
> + clk_hw_get_name(hw), req->rate);
> + return 0;
> +}
> +
> +static int sg2042_clk_pll_set_rate(struct clk_hw *hw,
> + unsigned long rate,
> + unsigned long parent_rate)
> +{
> + unsigned long flags;
> + unsigned int value;
> + int ret = 0;
> + struct sg2042_pll_ctrl pctrl_table;
> + struct sg2042_pll_clock *pll = to_sg2042_pll_clk(hw);
> +
> + spin_lock_irqsave(pll->lock, flags);
> + if (sg2042_pll_enable(pll, 0)) {
> + pr_warn("Can't disable pll(%s), status error\n", pll->name);
> + goto out;
> + }
> + ret = sg2042_get_pll_ctl_setting(&pctrl_table, rate, parent_rate);
> + if (ret) {
> + pr_warn("%s: Can't find a proper pll setting\n", pll->name);
> + goto out2;
> + }
> +
> + value = sg2042_pll_ctrl_encode(&pctrl_table);
> +
> + /* write the value to top register */
> + regmap_write(pll->map, pll->offset_ctrl, value);
> +
> +out2:
> + sg2042_pll_enable(pll, 1);
> +out:
> + spin_unlock_irqrestore(pll->lock, flags);
> +
> + pr_debug("--> %s: pll_set_rate: val = 0x%x\n",
> + clk_hw_get_name(hw), value);
> + return ret;
> +}
> +
> +static const struct clk_ops sg2042_clk_pll_ops = {
> + .recalc_rate = sg2042_clk_pll_recalc_rate,
> + .round_rate = sg2042_clk_pll_round_rate,
> + .determine_rate = sg2042_clk_pll_determine_rate,
> + .set_rate = sg2042_clk_pll_set_rate,
> +};
> +
> +static const struct clk_ops sg2042_clk_pll_ro_ops = {
> + .recalc_rate = sg2042_clk_pll_recalc_rate,
> + .round_rate = sg2042_clk_pll_round_rate,
> +};
> +
> +#define DIV_MASK(width) GENMASK(((width) - 1), 0)
Is this clk_div_mask()?
> +
> +static unsigned long sg2042_clk_divider_recalc_rate(struct clk_hw *hw,
> + unsigned long parent_rate)
> +{
> + struct sg2042_divider_clock *divider = to_sg2042_clk_divider(hw);
> + unsigned int val;
> + unsigned long ret_rate;
> +
> + if (!(readl(divider->reg) & BIT(3))) {
> + val = (int)(divider->initval);
> + } else {
> + val = readl(divider->reg) >> divider->shift;
> + val &= DIV_MASK(divider->width);
> + }
> +
> + ret_rate = divider_recalc_rate(hw, parent_rate, val, NULL,
> + divider->div_flags, divider->width);
> +
> + pr_debug("--> %s: divider_recalc_rate: ret_rate = %ld\n",
> + clk_hw_get_name(hw), ret_rate);
> + return ret_rate;
> +}
> +
> +static long sg2042_clk_divider_round_rate(struct clk_hw *hw,
> + unsigned long rate,
> + unsigned long *prate)
> +{
> + int bestdiv;
> + unsigned long ret_rate;
> + struct sg2042_divider_clock *divider = to_sg2042_clk_divider(hw);
> +
> + /* if read only, just return current value */
> + if (divider->div_flags & CLK_DIVIDER_READ_ONLY) {
> + if (!(readl(divider->reg) & BIT(3))) {
> + bestdiv = (int)(divider->initval);
> + } else {
> + bestdiv = readl(divider->reg) >> divider->shift;
> + bestdiv &= DIV_MASK(divider->width);
> + }
> + ret_rate = DIV_ROUND_UP_ULL((u64)*prate, bestdiv);
> + } else {
> + ret_rate = divider_round_rate(hw, rate, prate, NULL,
> + divider->width, divider->div_flags);
> + }
> +
> + pr_debug("--> %s: divider_round_rate: val = %ld\n",
> + clk_hw_get_name(hw), ret_rate);
> + return ret_rate;
> +}
> +
> +static int sg2042_clk_divider_set_rate(struct clk_hw *hw,
> + unsigned long rate,
> + unsigned long parent_rate)
> +{
> + unsigned int value;
> + unsigned int val, val2;
> + unsigned long flags = 0;
> + struct sg2042_divider_clock *divider = to_sg2042_clk_divider(hw);
> +
> + value = divider_get_val(rate, parent_rate, NULL,
> + divider->width, divider->div_flags);
> +
> + if (divider->lock)
> + spin_lock_irqsave(divider->lock, flags);
> + else
> + __acquire(divider->lock);
> +
> + /*
> + * The sequence of clock frequency modification is:
> + * Assert to reset divider.
> + * Modify the value of Clock Divide Factor (and High Wide if needed).
> + * De-assert to restore divided clock with new frequency.
> + */
> + val = readl(divider->reg);
> +
> + /* assert */
> + val &= ~0x1;
> + writel(val, divider->reg);
> +
> + if (divider->div_flags & CLK_DIVIDER_HIWORD_MASK) {
> + val = DIV_MASK(divider->width) << (divider->shift + 16);
> + } else {
> + val = readl(divider->reg);
> + val &= ~(DIV_MASK(divider->width) << divider->shift);
> + }
> + val |= value << divider->shift;
> + val |= 1 << 3;
> + writel(val, divider->reg);
> + val2 = val;
> +
> + /* de-assert */
> + val |= 1;
> + writel(val, divider->reg);
> +
> + if (divider->lock)
> + spin_unlock_irqrestore(divider->lock, flags);
> + else
> + __release(divider->lock);
> +
> + pr_debug("--> %s: divider_set_rate: register val = 0x%x\n",
> + clk_hw_get_name(hw), val2);
> + return 0;
> +}
> +
> +static const struct clk_ops sg2042_clk_divider_ops = {
> + .recalc_rate = sg2042_clk_divider_recalc_rate,
> + .round_rate = sg2042_clk_divider_round_rate,
> + .set_rate = sg2042_clk_divider_set_rate,
> +};
> +
> +static const struct clk_ops sg2042_clk_divider_ro_ops = {
> + .recalc_rate = sg2042_clk_divider_recalc_rate,
> + .round_rate = sg2042_clk_divider_round_rate,
> +};
> +
> +#define SG2042_PLL(_id, _name, _parent_name, _r_stat, _r_enable, _r_ctrl, _shift) \
> + { \
> + .hw.init = CLK_HW_INIT_PARENTS( \
> + _name, \
> + (const char *[]){_parent_name}, \
> + &sg2042_clk_pll_ops, \
> + CLK_GET_RATE_NOCACHE | CLK_GET_ACCURACY_NOCACHE),\
> + .id = _id, \
> + .name = _name, \
> + .offset_ctrl = _r_ctrl, \
> + .offset_status = _r_stat, \
> + .offset_enable = _r_enable, \
> + .shift_status_lock = 8 + (_shift), \
> + .shift_status_updating = _shift, \
> + .shift_enable = _shift, \
> + }
> +
> +#define SG2042_PLL_RO(_id, _name, _parent_name, _r_stat, _r_enable, _r_ctrl, _shift) \
> + { \
> + .hw.init = CLK_HW_INIT_PARENTS( \
> + _name, \
> + (const char *[]){_parent_name}, \
> + &sg2042_clk_pll_ro_ops, \
> + CLK_GET_RATE_NOCACHE | CLK_GET_ACCURACY_NOCACHE),\
> + .id = _id, \
> + .name = _name, \
> + .offset_ctrl = _r_ctrl, \
> + .offset_status = _r_stat, \
> + .offset_enable = _r_enable, \
> + .shift_status_lock = 8 + (_shift), \
> + .shift_status_updating = _shift, \
> + .shift_enable = _shift, \
> + }
> +
> +static struct sg2042_pll_clock sg2042_pll_clks[] = {
> + SG2042_PLL(MPLL_CLK, "mpll_clock", "cgi_main",
> + R_PLL_STAT, R_PLL_CLKEN_CONTROL, R_MPLL_CONTROL, 0),
> + SG2042_PLL_RO(FPLL_CLK, "fpll_clock", "cgi_main",
> + R_PLL_STAT, R_PLL_CLKEN_CONTROL, R_FPLL_CONTROL, 3),
> + SG2042_PLL_RO(DPLL0_CLK, "dpll0_clock", "cgi_dpll0",
> + R_PLL_STAT, R_PLL_CLKEN_CONTROL, R_DPLL0_CONTROL, 4),
> + SG2042_PLL_RO(DPLL1_CLK, "dpll1_clock", "cgi_dpll1",
> + R_PLL_STAT, R_PLL_CLKEN_CONTROL, R_DPLL1_CONTROL, 5),
> +};
> +
> +#define SG2042_DIV(_id, _name, _parent_name, \
> + _r_ctrl, _shift, _width, \
> + _div_flag, _initval) { \
> + .hw.init = CLK_HW_INIT_PARENTS( \
> + _name, \
> + (const char *[]){_parent_name}, \
> + &sg2042_clk_divider_ops, \
> + 0), \
> + .id = _id, \
> + .name = _name, \
> + .offset_ctrl = _r_ctrl, \
> + .shift = _shift, \
> + .width = _width, \
> + .div_flags = _div_flag, \
> + .initval = _initval, \
> + }
> +
> +#define SG2042_DIV_RO(_id, _name, _parent_name, \
> + _r_ctrl, _shift, _width, \
> + _div_flag, _initval) { \
> + .hw.init = CLK_HW_INIT_PARENTS( \
> + _name, \
> + (const char *[]){_parent_name}, \
> + &sg2042_clk_divider_ro_ops, \
> + 0), \
> + .id = _id, \
> + .name = _name, \
> + .offset_ctrl = _r_ctrl, \
> + .shift = _shift, \
> + .width = _width, \
> + .div_flags = (_div_flag) | CLK_DIVIDER_READ_ONLY, \
> + .initval = _initval, \
> + }
> +
> +/*
> + * DIV items in the array are sorted according to the clock-tree diagram,
> + * from top to bottom, from upstream to downstream. Read TRM for details.
> + */
> +#define DEF_DIVFLAG (CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO)
> +static struct sg2042_divider_clock sg2042_div_clks[] = {
> + SG2042_DIV_RO(DIV_CLK_DPLL0_DDR01_0,
> + "clk_div_ddr01_0", "clk_gate_ddr01_div0",
> + R_CLKDIVREG27, 16, 5, DEF_DIVFLAG, 1),
> + SG2042_DIV_RO(DIV_CLK_FPLL_DDR01_1,
> + "clk_div_ddr01_1", "clk_gate_ddr01_div1",
> + R_CLKDIVREG28, 16, 5, DEF_DIVFLAG, 1),
> +
> + SG2042_DIV_RO(DIV_CLK_DPLL1_DDR23_0,
> + "clk_div_ddr23_0", "clk_gate_ddr23_div0",
> + R_CLKDIVREG29, 16, 5, DEF_DIVFLAG, 1),
> + SG2042_DIV_RO(DIV_CLK_FPLL_DDR23_1,
> + "clk_div_ddr23_1", "clk_gate_ddr23_div1",
> + R_CLKDIVREG30, 16, 5, DEF_DIVFLAG, 1),
> +
> + SG2042_DIV(DIV_CLK_MPLL_RP_CPU_NORMAL_0,
> + "clk_div_rp_cpu_normal_0", "clk_gate_rp_cpu_normal_div0",
> + R_CLKDIVREG0, 16, 5, DEF_DIVFLAG, 1),
> + SG2042_DIV(DIV_CLK_FPLL_RP_CPU_NORMAL_1,
> + "clk_div_rp_cpu_normal_1", "clk_gate_rp_cpu_normal_div1",
> + R_CLKDIVREG1, 16, 5, DEF_DIVFLAG, 1),
> +
> + SG2042_DIV(DIV_CLK_MPLL_AXI_DDR_0,
> + "clk_div_axi_ddr_0", "clk_gate_axi_ddr_div0",
> + R_CLKDIVREG25, 16, 5, DEF_DIVFLAG, 2),
> + SG2042_DIV(DIV_CLK_FPLL_AXI_DDR_1,
> + "clk_div_axi_ddr_1", "clk_gate_axi_ddr_div1",
> + R_CLKDIVREG26, 16, 5, DEF_DIVFLAG, 1),
> +
> + SG2042_DIV(DIV_CLK_FPLL_TOP_RP_CMN_DIV2,
> + "clk_div_top_rp_cmn_div2", "clk_mux_rp_cpu_normal",
> + R_CLKDIVREG3, 16, 16, DEF_DIVFLAG, 2),
> +
> + SG2042_DIV(DIV_CLK_FPLL_50M_A53, "clk_div_50m_a53", "fpll_clock",
> + R_CLKDIVREG2, 16, 8, DEF_DIVFLAG, 20),
> + /* downstream of div_50m_a53 */
> + SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER1, "clk_div_timer1", "clk_div_50m_a53",
> + R_CLKDIVREG6, 16, 16, DEF_DIVFLAG, 1),
> + SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER2, "clk_div_timer2", "clk_div_50m_a53",
> + R_CLKDIVREG7, 16, 16, DEF_DIVFLAG, 1),
> + SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER3, "clk_div_timer3", "clk_div_50m_a53",
> + R_CLKDIVREG8, 16, 16, DEF_DIVFLAG, 1),
> + SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER4, "clk_div_timer4", "clk_div_50m_a53",
> + R_CLKDIVREG9, 16, 16, DEF_DIVFLAG, 1),
> + SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER5, "clk_div_timer5", "clk_div_50m_a53",
> + R_CLKDIVREG10, 16, 16, DEF_DIVFLAG, 1),
> + SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER6, "clk_div_timer6", "clk_div_50m_a53",
> + R_CLKDIVREG11, 16, 16, DEF_DIVFLAG, 1),
> + SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER7, "clk_div_timer7", "clk_div_50m_a53",
> + R_CLKDIVREG12, 16, 16, DEF_DIVFLAG, 1),
> + SG2042_DIV(DIV_CLK_FPLL_DIV_TIMER8, "clk_div_timer8", "clk_div_50m_a53",
> + R_CLKDIVREG13, 16, 16, DEF_DIVFLAG, 1),
> +
> + /*
> + * Set clk_div_uart_500m as RO, because the width of CLKDIVREG4 is too
> + * narrow for us to produce 115200. Use UART internal divider directly.
> + */
> + SG2042_DIV_RO(DIV_CLK_FPLL_UART_500M, "clk_div_uart_500m", "fpll_clock",
> + R_CLKDIVREG4, 16, 7, DEF_DIVFLAG, 2),
> + SG2042_DIV(DIV_CLK_FPLL_AHB_LPC, "clk_div_ahb_lpc", "fpll_clock",
> + R_CLKDIVREG5, 16, 16, DEF_DIVFLAG, 5),
> + SG2042_DIV(DIV_CLK_FPLL_EFUSE, "clk_div_efuse", "fpll_clock",
> + R_CLKDIVREG14, 16, 7, DEF_DIVFLAG, 40),
> + SG2042_DIV(DIV_CLK_FPLL_TX_ETH0, "clk_div_tx_eth0", "fpll_clock",
> + R_CLKDIVREG16, 16, 11, DEF_DIVFLAG, 8),
> + SG2042_DIV(DIV_CLK_FPLL_PTP_REF_I_ETH0,
> + "clk_div_ptp_ref_i_eth0", "fpll_clock",
> + R_CLKDIVREG17, 16, 8, DEF_DIVFLAG, 20),
> + SG2042_DIV(DIV_CLK_FPLL_REF_ETH0, "clk_div_ref_eth0", "fpll_clock",
> + R_CLKDIVREG18, 16, 8, DEF_DIVFLAG, 40),
> + SG2042_DIV(DIV_CLK_FPLL_EMMC, "clk_div_emmc", "fpll_clock",
> + R_CLKDIVREG19, 16, 5, DEF_DIVFLAG, 10),
> + SG2042_DIV(DIV_CLK_FPLL_SD, "clk_div_sd", "fpll_clock",
> + R_CLKDIVREG21, 16, 5, DEF_DIVFLAG, 10),
> +
> + SG2042_DIV(DIV_CLK_FPLL_TOP_AXI0, "clk_div_top_axi0", "fpll_clock",
> + R_CLKDIVREG23, 16, 5, DEF_DIVFLAG, 10),
> + /* downstream of div_top_axi0 */
> + SG2042_DIV(DIV_CLK_FPLL_100K_EMMC, "clk_div_100k_emmc", "clk_div_top_axi0",
> + R_CLKDIVREG20, 16, 16, DEF_DIVFLAG, 1000),
> + SG2042_DIV(DIV_CLK_FPLL_100K_SD, "clk_div_100k_sd", "clk_div_top_axi0",
> + R_CLKDIVREG22, 16, 16, DEF_DIVFLAG, 1000),
> + SG2042_DIV(DIV_CLK_FPLL_GPIO_DB, "clk_div_gpio_db", "clk_div_top_axi0",
> + R_CLKDIVREG15, 16, 16, DEF_DIVFLAG, 1000),
> +
> + SG2042_DIV(DIV_CLK_FPLL_TOP_AXI_HSPERI,
> + "clk_div_top_axi_hsperi", "fpll_clock",
> + R_CLKDIVREG24, 16, 5, DEF_DIVFLAG, 4),
> +};
> +
> +#define SG2042_GATE(_id, _name, _parent_name, _flags, \
> + _r_enable, _bit_idx) { \
> + .id = _id, \
> + .name = _name, \
> + .parent_name = _parent_name, \
> + .flags = _flags, \
> + .offset_enable = _r_enable, \
> + .bit_idx = _bit_idx, \
> + }
> +
> +/*
> + * GATE items in the array are sorted according to the clock-tree diagram,
> + * from top to bottom, from upstream to downstream. Read TRM for details.
> + */
> +
> +/* Gate clocks which control registers are defined in CLOCK. */
> +static const struct sg2042_gate_clock sg2042_gate_clks[] = {
> + SG2042_GATE(GATE_CLK_DDR01_DIV0, "clk_gate_ddr01_div0", "dpll0_clock",
> + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
> + R_CLKDIVREG27, 4),
> + SG2042_GATE(GATE_CLK_DDR01_DIV1, "clk_gate_ddr01_div1", "fpll_clock",
> + CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
> + R_CLKDIVREG28, 4),
> +
> + SG2042_GATE(GATE_CLK_DDR23_DIV0, "clk_gate_ddr23_div0", "dpll1_clock",
> + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
> + R_CLKDIVREG29, 4),
> + SG2042_GATE(GATE_CLK_DDR23_DIV1, "clk_gate_ddr23_div1", "fpll_clock",
> + CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
> + R_CLKDIVREG30, 4),
> +
> + SG2042_GATE(GATE_CLK_RP_CPU_NORMAL_DIV0, "clk_gate_rp_cpu_normal_div0", "mpll_clock",
> + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
> + R_CLKDIVREG0, 4),
> + SG2042_GATE(GATE_CLK_RP_CPU_NORMAL_DIV1,
> + "clk_gate_rp_cpu_normal_div1", "fpll_clock",
> + CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
> + R_CLKDIVREG1, 4),
> +
> + SG2042_GATE(GATE_CLK_AXI_DDR_DIV0, "clk_gate_axi_ddr_div0", "mpll_clock",
> + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
> + R_CLKDIVREG25, 4),
> + SG2042_GATE(GATE_CLK_AXI_DDR_DIV1, "clk_gate_axi_ddr_div1", "fpll_clock",
> + CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
> + R_CLKDIVREG26, 4),
> +
> + /* upon are gate clocks as input source for the muxes */
> +
> + SG2042_GATE(GATE_CLK_DDR01, "clk_gate_ddr01", "clk_mux_ddr01",
> + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
> + R_CLKENREG1, 14),
> +
> + SG2042_GATE(GATE_CLK_DDR23, "clk_gate_ddr23", "clk_mux_ddr23",
> + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
> + R_CLKENREG1, 15),
> +
> + SG2042_GATE(GATE_CLK_RP_CPU_NORMAL,
> + "clk_gate_rp_cpu_normal", "clk_mux_rp_cpu_normal",
> + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
> + R_CLKENREG0, 0),
> +
> + SG2042_GATE(GATE_CLK_AXI_DDR, "clk_gate_axi_ddr", "clk_mux_axi_ddr",
> + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
> + R_CLKENREG1, 13),
> +
> + /* upon are gate clocks directly downstream of muxes */
> +
> + /* downstream of clk_div_top_rp_cmn_div2 */
> + SG2042_GATE(GATE_CLK_TOP_RP_CMN_DIV2,
> + "clk_gate_top_rp_cmn_div2", "clk_div_top_rp_cmn_div2",
> + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG0, 2),
> + SG2042_GATE(GATE_CLK_HSDMA, "clk_gate_hsdma", "clk_gate_top_rp_cmn_div2",
> + CLK_SET_RATE_PARENT, R_CLKENREG1, 10),
> +
> + /*
> + * downstream of clk_gate_rp_cpu_normal
> + *
> + * FIXME: there should be one 1/2 DIV between clk_gate_rp_cpu_normal
> + * and clk_gate_axi_pcie0/clk_gate_axi_pcie1.
> + * But the 1/2 DIV is fixed and no configurable register exported, so
> + * when reading from these two clocks, the rate value are still the
> + * same as that of clk_gate_rp_cpu_normal, it's not correct.
> + * This just affects the value read.
> + */
> + SG2042_GATE(GATE_CLK_AXI_PCIE0,
> + "clk_gate_axi_pcie0", "clk_gate_rp_cpu_normal",
> + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG1, 8),
> + SG2042_GATE(GATE_CLK_AXI_PCIE1,
> + "clk_gate_axi_pcie1", "clk_gate_rp_cpu_normal",
> + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG1, 9),
> +
> + /* downstream of div_50m_a53 */
> + SG2042_GATE(GATE_CLK_A53_50M, "clk_gate_a53_50m", "clk_div_50m_a53",
> + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG0, 1),
> + SG2042_GATE(GATE_CLK_TIMER1, "clk_gate_timer1", "clk_div_timer1",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 12),
> + SG2042_GATE(GATE_CLK_TIMER2, "clk_gate_timer2", "clk_div_timer2",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 13),
> + SG2042_GATE(GATE_CLK_TIMER3, "clk_gate_timer3", "clk_div_timer3",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 14),
> + SG2042_GATE(GATE_CLK_TIMER4, "clk_gate_timer4", "clk_div_timer4",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 15),
> + SG2042_GATE(GATE_CLK_TIMER5, "clk_gate_timer5", "clk_div_timer5",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 16),
> + SG2042_GATE(GATE_CLK_TIMER6, "clk_gate_timer6", "clk_div_timer6",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 17),
> + SG2042_GATE(GATE_CLK_TIMER7, "clk_gate_timer7", "clk_div_timer7",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 18),
> + SG2042_GATE(GATE_CLK_TIMER8, "clk_gate_timer8", "clk_div_timer8",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 19),
> +
> + /* gate clocks downstream from div clocks one-to-one */
> + SG2042_GATE(GATE_CLK_UART_500M, "clk_gate_uart_500m", "clk_div_uart_500m",
> + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, R_CLKENREG0, 4),
> + SG2042_GATE(GATE_CLK_AHB_LPC, "clk_gate_ahb_lpc", "clk_div_ahb_lpc",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 7),
> + SG2042_GATE(GATE_CLK_EFUSE, "clk_gate_efuse", "clk_div_efuse",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 20),
> + SG2042_GATE(GATE_CLK_TX_ETH0, "clk_gate_tx_eth0", "clk_div_tx_eth0",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 30),
> + SG2042_GATE(GATE_CLK_PTP_REF_I_ETH0,
> + "clk_gate_ptp_ref_i_eth0", "clk_div_ptp_ref_i_eth0",
> + CLK_SET_RATE_PARENT, R_CLKENREG1, 0),
> + SG2042_GATE(GATE_CLK_REF_ETH0, "clk_gate_ref_eth0", "clk_div_ref_eth0",
> + CLK_SET_RATE_PARENT, R_CLKENREG1, 1),
> + SG2042_GATE(GATE_CLK_EMMC_100M, "clk_gate_emmc", "clk_div_emmc",
> + CLK_SET_RATE_PARENT, R_CLKENREG1, 3),
> + SG2042_GATE(GATE_CLK_SD_100M, "clk_gate_sd", "clk_div_sd",
> + CLK_SET_RATE_PARENT, R_CLKENREG1, 6),
> +
> + /* downstream of clk_div_top_axi0 */
> + SG2042_GATE(GATE_CLK_AHB_ROM, "clk_gate_ahb_rom", "clk_div_top_axi0",
> + 0, R_CLKENREG0, 8),
> + SG2042_GATE(GATE_CLK_AHB_SF, "clk_gate_ahb_sf", "clk_div_top_axi0",
> + 0, R_CLKENREG0, 9),
> + SG2042_GATE(GATE_CLK_AXI_SRAM, "clk_gate_axi_sram", "clk_div_top_axi0",
> + CLK_IGNORE_UNUSED, R_CLKENREG0, 10),
> + SG2042_GATE(GATE_CLK_APB_TIMER, "clk_gate_apb_timer", "clk_div_top_axi0",
> + CLK_IGNORE_UNUSED, R_CLKENREG0, 11),
> + SG2042_GATE(GATE_CLK_APB_EFUSE, "clk_gate_apb_efuse", "clk_div_top_axi0",
> + 0, R_CLKENREG0, 21),
> + SG2042_GATE(GATE_CLK_APB_GPIO, "clk_gate_apb_gpio", "clk_div_top_axi0",
> + 0, R_CLKENREG0, 22),
> + SG2042_GATE(GATE_CLK_APB_GPIO_INTR,
> + "clk_gate_apb_gpio_intr", "clk_div_top_axi0",
> + 0, R_CLKENREG0, 23),
> + SG2042_GATE(GATE_CLK_APB_I2C, "clk_gate_apb_i2c", "clk_div_top_axi0",
> + 0, R_CLKENREG0, 26),
> + SG2042_GATE(GATE_CLK_APB_WDT, "clk_gate_apb_wdt", "clk_div_top_axi0",
> + 0, R_CLKENREG0, 27),
> + SG2042_GATE(GATE_CLK_APB_PWM, "clk_gate_apb_pwm", "clk_div_top_axi0",
> + 0, R_CLKENREG0, 28),
> + SG2042_GATE(GATE_CLK_APB_RTC, "clk_gate_apb_rtc", "clk_div_top_axi0",
> + 0, R_CLKENREG0, 29),
> + SG2042_GATE(GATE_CLK_TOP_AXI0, "clk_gate_top_axi0", "clk_div_top_axi0",
> + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
> + R_CLKENREG1, 11),
> + /* downstream of DIV clocks which are sourced from clk_div_top_axi0 */
> + SG2042_GATE(GATE_CLK_GPIO_DB, "clk_gate_gpio_db", "clk_div_gpio_db",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 24),
> + SG2042_GATE(GATE_CLK_100K_EMMC, "clk_gate_100k_emmc", "clk_div_100k_emmc",
> + CLK_SET_RATE_PARENT, R_CLKENREG1, 4),
> + SG2042_GATE(GATE_CLK_100K_SD, "clk_gate_100k_sd", "clk_div_100k_sd",
> + CLK_SET_RATE_PARENT, R_CLKENREG1, 7),
> +
> + /* downstream of clk_div_top_axi_hsperi */
> + SG2042_GATE(GATE_CLK_SYSDMA_AXI,
> + "clk_gate_sysdma_axi", "clk_div_top_axi_hsperi",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 3),
> + SG2042_GATE(GATE_CLK_APB_UART,
> + "clk_gate_apb_uart", "clk_div_top_axi_hsperi",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 5),
> + SG2042_GATE(GATE_CLK_AXI_DBG_I2C,
> + "clk_gate_axi_dbg_i2c", "clk_div_top_axi_hsperi",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 6),
> + SG2042_GATE(GATE_CLK_APB_SPI,
> + "clk_gate_apb_spi", "clk_div_top_axi_hsperi",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 25),
> + SG2042_GATE(GATE_CLK_AXI_ETH0,
> + "clk_gate_axi_eth0", "clk_div_top_axi_hsperi",
> + CLK_SET_RATE_PARENT, R_CLKENREG0, 31),
> + SG2042_GATE(GATE_CLK_AXI_EMMC,
> + "clk_gate_axi_emmc", "clk_div_top_axi_hsperi",
> + CLK_SET_RATE_PARENT, R_CLKENREG1, 2),
> + SG2042_GATE(GATE_CLK_AXI_SD,
> + "clk_gate_axi_sd", "clk_div_top_axi_hsperi",
> + CLK_SET_RATE_PARENT, R_CLKENREG1, 5),
> + SG2042_GATE(GATE_CLK_TOP_AXI_HSPERI,
> + "clk_gate_top_axi_hsperi", "clk_div_top_axi_hsperi",
> + CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED | CLK_IS_CRITICAL,
> + R_CLKENREG1, 12),
> +};
> +
> +/*
> + * Gate clocks for RP subsystem (including the MP subsystem), which control
> + * registers are defined in SYS_CTRL.
> + */
> +static const struct sg2042_gate_clock sg2042_gate_rp[] = {
> + /* downstream of clk_gate_rp_cpu_normal about rxu */
> + SG2042_GATE(GATE_CLK_RXU0, "clk_gate_rxu0", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 0),
> + SG2042_GATE(GATE_CLK_RXU1, "clk_gate_rxu1", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 1),
> + SG2042_GATE(GATE_CLK_RXU2, "clk_gate_rxu2", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 2),
> + SG2042_GATE(GATE_CLK_RXU3, "clk_gate_rxu3", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 3),
> + SG2042_GATE(GATE_CLK_RXU4, "clk_gate_rxu4", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 4),
> + SG2042_GATE(GATE_CLK_RXU5, "clk_gate_rxu5", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 5),
> + SG2042_GATE(GATE_CLK_RXU6, "clk_gate_rxu6", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 6),
> + SG2042_GATE(GATE_CLK_RXU7, "clk_gate_rxu7", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 7),
> + SG2042_GATE(GATE_CLK_RXU8, "clk_gate_rxu8", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 8),
> + SG2042_GATE(GATE_CLK_RXU9, "clk_gate_rxu9", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 9),
> + SG2042_GATE(GATE_CLK_RXU10, "clk_gate_rxu10", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 10),
> + SG2042_GATE(GATE_CLK_RXU11, "clk_gate_rxu11", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 11),
> + SG2042_GATE(GATE_CLK_RXU12, "clk_gate_rxu12", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 12),
> + SG2042_GATE(GATE_CLK_RXU13, "clk_gate_rxu13", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 13),
> + SG2042_GATE(GATE_CLK_RXU14, "clk_gate_rxu14", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 14),
> + SG2042_GATE(GATE_CLK_RXU15, "clk_gate_rxu15", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 15),
> + SG2042_GATE(GATE_CLK_RXU16, "clk_gate_rxu16", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 16),
> + SG2042_GATE(GATE_CLK_RXU17, "clk_gate_rxu17", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 17),
> + SG2042_GATE(GATE_CLK_RXU18, "clk_gate_rxu18", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 18),
> + SG2042_GATE(GATE_CLK_RXU19, "clk_gate_rxu19", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 19),
> + SG2042_GATE(GATE_CLK_RXU20, "clk_gate_rxu20", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 20),
> + SG2042_GATE(GATE_CLK_RXU21, "clk_gate_rxu21", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 21),
> + SG2042_GATE(GATE_CLK_RXU22, "clk_gate_rxu22", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 22),
> + SG2042_GATE(GATE_CLK_RXU23, "clk_gate_rxu23", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 23),
> + SG2042_GATE(GATE_CLK_RXU24, "clk_gate_rxu24", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 24),
> + SG2042_GATE(GATE_CLK_RXU25, "clk_gate_rxu25", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 25),
> + SG2042_GATE(GATE_CLK_RXU26, "clk_gate_rxu26", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 26),
> + SG2042_GATE(GATE_CLK_RXU27, "clk_gate_rxu27", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 27),
> + SG2042_GATE(GATE_CLK_RXU28, "clk_gate_rxu28", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 28),
> + SG2042_GATE(GATE_CLK_RXU29, "clk_gate_rxu29", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 29),
> + SG2042_GATE(GATE_CLK_RXU30, "clk_gate_rxu30", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 30),
> + SG2042_GATE(GATE_CLK_RXU31, "clk_gate_rxu31", "clk_gate_rp_cpu_normal",
> + 0, R_RP_RXU_CLK_ENABLE, 31),
> +
> + /* downstream of clk_gate_rp_cpu_normal about mp */
> + SG2042_GATE(GATE_CLK_MP0, "clk_gate_mp0", "clk_gate_rp_cpu_normal",
> + CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP0_CONTROL_REG, 0),
All these clks are marked as ignore unused and critical. The combination
of both flags doesn't make any sense. If the clk is critical, it won't
be turned off during disabling unused clks. I doubt all these are
critical either.
> + SG2042_GATE(GATE_CLK_MP1, "clk_gate_mp1", "clk_gate_rp_cpu_normal",
> + CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP1_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP2, "clk_gate_mp2", "clk_gate_rp_cpu_normal",
> + CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP2_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP3, "clk_gate_mp3", "clk_gate_rp_cpu_normal",
> + CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP3_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP4, "clk_gate_mp4", "clk_gate_rp_cpu_normal",
> + CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP4_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP5, "clk_gate_mp5", "clk_gate_rp_cpu_normal",
> + CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP5_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP6, "clk_gate_mp6", "clk_gate_rp_cpu_normal",
> + CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP6_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP7, "clk_gate_mp7", "clk_gate_rp_cpu_normal",
> + CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP7_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP8, "clk_gate_mp8", "clk_gate_rp_cpu_normal",
> + CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP8_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP9, "clk_gate_mp9", "clk_gate_rp_cpu_normal",
> + CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP9_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP10, "clk_gate_mp10", "clk_gate_rp_cpu_normal",
> + CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP10_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP11, "clk_gate_mp11", "clk_gate_rp_cpu_normal",
> + CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP11_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP12, "clk_gate_mp12", "clk_gate_rp_cpu_normal",
> + CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP12_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP13, "clk_gate_mp13", "clk_gate_rp_cpu_normal",
> + CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP13_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP14, "clk_gate_mp14", "clk_gate_rp_cpu_normal",
> + CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP14_CONTROL_REG, 0),
> + SG2042_GATE(GATE_CLK_MP15, "clk_gate_mp15", "clk_gate_rp_cpu_normal",
> + CLK_IGNORE_UNUSED | CLK_IS_CRITICAL, R_MP15_CONTROL_REG, 0),
> +};
> +
> +#define SG2042_MUX(_id, _name, _parent_names, _flags, _r_select, _shift, _width) { \
> + .id = _id, \
> + .name = _name, \
> + .parent_names = _parent_names, \
> + .num_parents = ARRAY_SIZE(_parent_names), \
> + .flags = _flags, \
> + .offset_select = _r_select, \
> + .shift = _shift, \
> + .width = _width, \
> + }
> +
> +/*
> + * Note: regarding names for mux clock, "0/1" or "div0/div1" means the
> + * first/second parent input source, not the register value.
> + * For example:
> + * "clk_div_ddr01_0" is the name of Clock divider 0 control of DDR01, and
> + * "clk_gate_ddr01_div0" is the gate clock in front of the "clk_div_ddr01_0",
> + * they are both controlled by register CLKDIVREG27;
> + * "clk_div_ddr01_1" is the name of Clock divider 1 control of DDR01, and
> + * "clk_gate_ddr01_div1" is the gate clock in front of the "clk_div_ddr01_1",
> + * they are both controlled by register CLKDIVREG28;
> + * While for register value of mux selection, use Clock Select for DDR01’s clock
> + * as example, see CLKSELREG0, bit[2].
> + * 1: Select in_dpll0_clk as clock source, correspondng to the parent input
> + * source from "clk_div_ddr01_0".
> + * 0: Select in_fpll_clk as clock source, corresponding to the parent input
> + * source from "clk_div_ddr01_1".
> + * So we need a table to define the array of register values corresponding to
> + * the parent index and tell CCF about this when registering mux clock.
> + */
> +static const u32 sg2042_mux_table[] = {1, 0};
> +
> +static const char *const clk_mux_ddr01_p[] = {
> + "clk_div_ddr01_0", "clk_div_ddr01_1"};
> +static const char *const clk_mux_ddr23_p[] = {
> + "clk_div_ddr23_0", "clk_div_ddr23_1"};
> +static const char *const clk_mux_rp_cpu_normal_p[] = {
> + "clk_div_rp_cpu_normal_0", "clk_div_rp_cpu_normal_1"};
> +static const char *const clk_mux_axi_ddr_p[] = {
> + "clk_div_axi_ddr_0", "clk_div_axi_ddr_1"};
> +
> +static struct sg2042_mux_clock sg2042_mux_clks[] = {
> + SG2042_MUX(MUX_CLK_DDR01, "clk_mux_ddr01", clk_mux_ddr01_p,
> + CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT | CLK_MUX_READ_ONLY,
> + R_CLKSELREG0, 2, 1),
> + SG2042_MUX(MUX_CLK_DDR23, "clk_mux_ddr23", clk_mux_ddr23_p,
> + CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT | CLK_MUX_READ_ONLY,
> + R_CLKSELREG0, 3, 1),
> + SG2042_MUX(MUX_CLK_RP_CPU_NORMAL, "clk_mux_rp_cpu_normal", clk_mux_rp_cpu_normal_p,
> + CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
> + R_CLKSELREG0, 0, 1),
> + SG2042_MUX(MUX_CLK_AXI_DDR, "clk_mux_axi_ddr", clk_mux_axi_ddr_p,
> + CLK_SET_RATE_PARENT | CLK_SET_RATE_NO_REPARENT,
> + R_CLKSELREG0, 1, 1),
> +};
> +
> +static DEFINE_SPINLOCK(sg2042_clk_lock);
> +
> +static int sg2042_clk_register_plls(struct sg2042_clk_data *clk_data,
> + struct sg2042_pll_clock pll_clks[],
> + int num_pll_clks)
> +{
> + struct clk_hw *hw;
> + struct sg2042_pll_clock *pll;
> + int i, ret = 0;
> +
> + for (i = 0; i < num_pll_clks; i++) {
> + pll = &pll_clks[i];
> + /* assign these for ops usage during registration */
> + pll->map = clk_data->regmap;
> + pll->lock = &sg2042_clk_lock;
> +
> + hw = &pll->hw;
> + ret = clk_hw_register(NULL, hw);
> + if (ret) {
> + pr_err("failed to register clock %s\n", pll->name);
> + break;
> + }
> +
> + clk_data->onecell_data.hws[pll->id] = hw;
> + }
> +
> + /* leave unregister to outside if failed */
> + return ret;
> +}
> +
> +static int sg2042_clk_register_divs(struct sg2042_clk_data *clk_data,
> + struct sg2042_divider_clock div_clks[],
> + int num_div_clks)
> +{
> + struct clk_hw *hw;
> + struct sg2042_divider_clock *div;
> + int i, ret = 0;
> +
> + for (i = 0; i < num_div_clks; i++) {
> + div = &div_clks[i];
> +
> + if (div->div_flags & CLK_DIVIDER_HIWORD_MASK) {
> + if (div->width + div->shift > 16) {
> + pr_warn("divider value exceeds LOWORD field\n");
> + ret = -EINVAL;
> + break;
> + }
> + }
> +
> + div->reg = clk_data->iobase + div->offset_ctrl;
> + div->lock = &sg2042_clk_lock;
> +
> + hw = &div->hw;
> + ret = clk_hw_register(NULL, hw);
> + if (ret) {
> + pr_err("failed to register clock %s\n", div->name);
> + break;
> + }
> +
> + clk_data->onecell_data.hws[div->id] = hw;
> + }
> +
> + /* leave unregister to outside if failed */
> + return ret;
> +}
> +
> +static int sg2042_clk_register_gates(struct sg2042_clk_data *clk_data,
> + const struct sg2042_gate_clock gate_clks[],
> + int num_gate_clks)
> +{
> + struct clk_hw *hw;
> + const struct sg2042_gate_clock *gate;
> + int i, ret = 0;
> +
> + for (i = 0; i < num_gate_clks; i++) {
> + gate = &gate_clks[i];
> + hw = clk_hw_register_gate(NULL,
> + gate->name,
> + gate->parent_name,
> + gate->flags,
> + clk_data->iobase + gate->offset_enable,
> + gate->bit_idx,
> + 0,
> + &sg2042_clk_lock);
> + if (IS_ERR(hw)) {
> + pr_err("failed to register clock %s\n", gate->name);
> + ret = PTR_ERR(hw);
> + break;
> + }
> +
> + clk_data->onecell_data.hws[gate->id] = hw;
> + }
> +
> + /* leave unregister to outside if failed */
> + return ret;
> +}
> +
> +static int sg2042_mux_notifier_cb(struct notifier_block *nb,
> + unsigned long event,
> + void *data)
> +{
> + int ret = 0;
> + struct clk_notifier_data *ndata = data;
> + struct clk_hw *hw = __clk_get_hw(ndata->clk);
> + const struct clk_ops *ops = &clk_mux_ops;
> + struct sg2042_mux_clock *mux = to_sg2042_mux_nb(nb);
> +
> + /* To switch to fpll before changing rate and restore after that */
> + if (event == PRE_RATE_CHANGE) {
> + mux->original_index = ops->get_parent(hw);
> +
> + /*
> + * "1" is the array index of the second parent input source of
> + * mux. For SG2042, it's fpll for all mux clocks.
> + * "0" is the array index of the frist parent input source of
> + * mux, For SG2042, it's mpll.
> + * FIXME, any good idea to avoid magic number?
> + */
> + if (mux->original_index == 0)
> + ret = ops->set_parent(hw, 1);
> + } else if (event == POST_RATE_CHANGE) {
> + ret = ops->set_parent(hw, mux->original_index);
> + }
> +
> + return notifier_from_errno(ret);
> +}
> +
> +static int sg2042_clk_register_muxs(struct sg2042_clk_data *clk_data,
> + struct sg2042_mux_clock mux_clks[],
> + int num_mux_clks)
> +{
> + struct clk_hw *hw;
> + struct sg2042_mux_clock *mux;
> + int i, ret = 0;
> +
> + for (i = 0; i < num_mux_clks; i++) {
> + mux = &mux_clks[i];
> +
> + hw = clk_hw_register_mux_table(NULL,
> + mux->name,
> + mux->parent_names,
> + mux->num_parents,
> + mux->flags,
> + clk_data->iobase + mux->offset_select,
> + mux->shift,
> + BIT(mux->width) - 1,
> + 0,
> + sg2042_mux_table,
> + &sg2042_clk_lock);
> + if (IS_ERR(hw)) {
> + pr_err("failed to register clock %s\n", mux->name);
> + ret = PTR_ERR(hw);
> + break;
> + }
> +
> + clk_data->onecell_data.hws[mux->id] = hw;
> +
> + /*
> + * FIXME: Theoretically, we should set parent for the
> + * mux, but seems hardware has done this for us with
> + * default value, so we don't set parent again here.
> + */
> +
> + if (!(mux->flags & CLK_MUX_READ_ONLY)) {
> + mux->clk_nb.notifier_call = sg2042_mux_notifier_cb;
> + ret = clk_notifier_register(hw->clk, &mux->clk_nb);
> + if (ret) {
> + pr_err("failed to register clock notifier for %s\n",
> + mux->name);
> + goto error_cleanup;
> + }
> + }
> + }
> +
> + return 0;
> +
> +error_cleanup:
> + /* unregister notifier and release the memory allocated */
> + for (i = 0; i < num_mux_clks; i++) {
> + mux = &mux_clks[i];
> +
> + hw = clk_data->onecell_data.hws[mux->id];
> +
> + if (hw)
> + clk_notifier_unregister(hw->clk, &mux->clk_nb);
> + }
> +
> + /* leave clk unregister to outside if failed */
> + return ret;
> +}
> +
> +/*
> + * @pll: flag if pll or not
> + * 1: yes, 0: no
> + */
> +static int sg2042_init_clkdata(struct device_node *node,
> + int num_clks,
> + struct sg2042_clk_data **pp_clk_data,
> + bool pll)
> +{
> + int ret = 0;
> + struct sg2042_clk_data *clk_data = NULL;
> +
> + clk_data = kzalloc(struct_size(clk_data, onecell_data.hws, num_clks), GFP_KERNEL);
> + if (!clk_data)
> + return -ENOMEM;
> +
> + if (pll) {
> + clk_data->regmap = device_node_to_regmap(node);
> + if (IS_ERR(clk_data->regmap)) {
> + ret = PTR_ERR(clk_data->regmap);
> + goto cleanup;
> + }
> + } else {
> + clk_data->iobase = of_iomap(node, 0);
> + if (!clk_data->iobase) {
> + ret = -EIO;
> + goto cleanup;
> + }
> + }
> +
> + clk_data->onecell_data.num = num_clks;
> +
> + *pp_clk_data = clk_data;
> +
> + return 0;
> +
> +cleanup:
> + kfree(clk_data);
> + return ret;
> +}
> +
> +static void __init sg2042_clkgen_init(struct device_node *node)
> +{
> + struct sg2042_clk_data *clk_data = NULL;
> + int i, ret = 0;
> + int num_clks = 0;
> +
> + num_clks = ARRAY_SIZE(sg2042_div_clks) +
> + ARRAY_SIZE(sg2042_gate_clks) +
> + ARRAY_SIZE(sg2042_mux_clks);
> + if (num_clks == 0) {
> + ret = -EINVAL;
> + goto error_out;
> + }
> +
> + ret = sg2042_init_clkdata(node, num_clks, &clk_data, 0);
> + if (ret < 0)
> + goto error_out;
> +
> + ret = sg2042_clk_register_divs(clk_data, sg2042_div_clks,
> + ARRAY_SIZE(sg2042_div_clks));
> + if (ret)
> + goto cleanup;
> +
> + ret = sg2042_clk_register_gates(clk_data, sg2042_gate_clks,
> + ARRAY_SIZE(sg2042_gate_clks));
> + if (ret)
> + goto cleanup;
> +
> + ret = sg2042_clk_register_muxs(clk_data, sg2042_mux_clks,
> + ARRAY_SIZE(sg2042_mux_clks));
> + if (ret)
> + goto cleanup;
> +
> + ret = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, &clk_data->onecell_data);
> + if (ret)
> + goto cleanup;
> +
> + return;
> +
> +cleanup:
> + for (i = 0; i < num_clks; i++) {
> + if (clk_data->onecell_data.hws[i])
> + clk_hw_unregister(clk_data->onecell_data.hws[i]);
> + }
> + kfree(clk_data);
> +
> +error_out:
> + pr_err("%s failed error number %d\n", __func__, ret);
> +}
> +
> +static void __init sg2042_rpgate_init(struct device_node *node)
> +{
> + struct sg2042_clk_data *clk_data = NULL;
> + int i, ret = 0;
> + int num_clks = 0;
> +
> + num_clks = ARRAY_SIZE(sg2042_gate_rp);
> + if (num_clks == 0) {
> + ret = -EINVAL;
> + goto error_out;
> + }
> +
> + ret = sg2042_init_clkdata(node, num_clks, &clk_data, 0);
> + if (ret < 0)
> + goto error_out;
> +
> + ret = sg2042_clk_register_gates(clk_data, sg2042_gate_rp,
> + ARRAY_SIZE(sg2042_gate_rp));
> + if (ret)
> + goto cleanup;
> +
> + ret = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, &clk_data->onecell_data);
> + if (ret)
> + goto cleanup;
> +
> + return;
> +
> +cleanup:
> + for (i = 0; i < num_clks; i++) {
> + if (clk_data->onecell_data.hws[i])
> + clk_hw_unregister(clk_data->onecell_data.hws[i]);
> + }
> + kfree(clk_data);
> +
> +error_out:
> + pr_err("%s failed error number %d\n", __func__, ret);
> +}
> +
> +static void __init sg2042_pll_init(struct device_node *node)
> +{
> + struct sg2042_clk_data *clk_data = NULL;
> + int i, ret = 0;
> + int num_clks = 0;
> +
> + num_clks = ARRAY_SIZE(sg2042_pll_clks);
> + if (num_clks == 0) {
> + ret = -EINVAL;
> + goto error_out;
> + }
> +
> + ret = sg2042_init_clkdata(node, num_clks, &clk_data, 1);
> + if (ret < 0)
> + goto error_out;
> +
> + ret = sg2042_clk_register_plls(clk_data, sg2042_pll_clks,
> + ARRAY_SIZE(sg2042_pll_clks));
> + if (ret)
> + goto cleanup;
> +
> + ret = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, &clk_data->onecell_data);
> + if (ret)
> + goto cleanup;
> +
> + return;
> +
> +cleanup:
> + for (i = 0; i < num_clks; i++) {
> + if (clk_data->onecell_data.hws[i])
> + clk_hw_unregister(clk_data->onecell_data.hws[i]);
> + }
> + kfree(clk_data);
> +
> +error_out:
> + pr_err("%s failed error number %d\n", __func__, ret);
> +}
> +
> +CLK_OF_DECLARE(sg2042_clkgen, "sophgo,sg2042-clkgen", sg2042_clkgen_init);
> +CLK_OF_DECLARE(sg2042_rpgate, "sophgo,sg2042-rpgate", sg2042_rpgate_init);
> +CLK_OF_DECLARE(sg2042_pll, "sophgo,sg2042-pll", sg2042_pll_init);
Use a platform driver please.
> diff --git a/drivers/clk/sophgo/clk-sophgo-sg2042.h b/drivers/clk/sophgo/clk-sophgo-sg2042.h
> new file mode 100644
> index 000000000000..d0a42a41c7b4
> --- /dev/null
> +++ b/drivers/clk/sophgo/clk-sophgo-sg2042.h
> @@ -0,0 +1,233 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +
> +#ifndef __CLK_SOPHGO_SG2042_H
> +#define __CLK_SOPHGO_SG2042_H
> +
> +#include <linux/clk.h>
This include shouldn't be used.
> +#include <linux/clk-provider.h>
> +#include <linux/regmap.h>
Please move the contents of this file into the C file.
> +
[...]
> +
> +/*
> + * Common data of clock-controller
> + * Note: this structure will be used both by clkgen & sysclk.
> + * @iobase: base address of clock-controller
> + * @regmap: base address of clock-controller for pll, just due to PLL uses
> + * regmap while others use iomem.
> + * @lock: clock register access lock
> + * @onecell_data: used for adding providers.
> + */
> +struct sg2042_clk_data {
> + void __iomem *iobase;
Why not use a regmap for the iobase as well?
> + struct regmap *regmap;
> + struct clk_hw_onecell_data onecell_data;
> +};
> +
> +/*
> + * PLL clock
> + * @id: used to map clk_onecell_data
> + * @name: used for print even when clk registration failed
> + * @map: used for regmap read/write, regmap is more useful
> + * then iomem address when we have multiple offsets
> + * for different registers.
> + * NOTE: PLL registers are all in SYS_CTRL!
> + * @lock: spinlock to protect register access
> + * @offset_status: offset of pll status registers
> + * @offset_enable: offset of pll enable registers
> + * @offset_ctrl: offset of pll control registers
> + * @shift_status_lock: shift of XXX_LOCK in pll status register
> + * @shift_status_updating: shift of UPDATING_XXX in pll status register
> + * @shift_enable: shift of XXX_CLK_EN in pll enable register
> + */
> +struct sg2042_pll_clock {
> + struct clk_hw hw;
> +
> + /* private data */
> + unsigned int id;
> + const char *name;
> +
> + struct regmap *map;
> + /* modification of frequency can only be served one at the time */
> + spinlock_t *lock;
> +
> + u32 offset_status;
> + u32 offset_enable;
> + u32 offset_ctrl;
> + u8 shift_status_lock;
> + u8 shift_status_updating;
> + u8 shift_enable;
> +};
> +
> +#define to_sg2042_pll_clk(_hw) container_of(_hw, struct sg2042_pll_clock, hw)
> +
> +/*
> + * Divider clock
> + * @id: used to map clk_onecell_data
> + * @name: used for print even when clk registration failed
> + * @reg: used for readl/writel.
> + * NOTE: DIV registers are ALL in CLOCK!
> + * @lock: spinlock to protect register access
> + * @offset_ctrl: offset of divider control registers
> + * @shift: shift of "Clock Divider Factor" in divider control register
> + * @width: width of "Clock Divider Factor" in divider control register
> + * @div_flags: private flags for this clock, not for framework-specific
> + * @initval: In the divider control register, we can configure whether
> + * to use the value of "Clock Divider Factor" or just use
> + * the initial value pre-configured by IC. BIT[3] controls
> + * this and by default (value is 0), means initial value
> + * is used.
> + * **NOTE** that we cannot read the initial value (default
> + * value when poweron) and default value of "Clock Divider
> + * Factor" is zero, which I think is a hardware design flaw
> + * and should be sync-ed with the initial value. So in
> + * software we have to add a configuration item (initval)
> + * to manually configure this value and use it when BIT[3]
> + * is zero.
> + */
> +struct sg2042_divider_clock {
> + struct clk_hw hw;
> +
> + /* private data */
> + unsigned int id;
> + const char *name;
Do we need to store a name pointer here forever? Can it be put in
clk_init_data instead?
> +
> + void __iomem *reg;
> + /* modification of frequency can only be served one at the time */
> + spinlock_t *lock;
> +
> + unsigned long offset_ctrl;
> + u8 shift;
> + u8 width;
> + u8 div_flags;
> + u32 initval;
> +};
> +
> +#define to_sg2042_clk_divider(_hw) \
> + container_of(_hw, struct sg2042_divider_clock, hw)
> +
> +/*
> + * Gate clock
> + * @id: used to map clk_onecell_data
> + * @name: string of this clock name
> + * @parent_name: string of parent clock name
> + * @flags: framework-specific flags for this clock
> + * @offset_enable: offset of gate enable registers
> + * @bit_idx: which bit in the register controls gating of this clock
> + */
> +struct sg2042_gate_clock {
> + unsigned int id;
> + const char *name;
> + const char *parent_name;
Please use struct clk_parent_data or clk_hw directly to specify parents.
Don't use string names.
> + unsigned long flags;
> + unsigned long offset_enable;
> + u8 bit_idx;
> +};
> +
> +/*
> + * Mux clock
> + * @id: used to map clk_onecell_data
> + * @name: string of this clock name
> + * @parent_name: string array of parents' clock name
> + * @flags: framework-specific flags for this clock
> + * @offset_select: offset of mux selection registers
> + * NOTE: MUX registers are ALL in CLOCK!
> + * @shift: shift of "Clock Select" in mux selection register
> + * @width: width of "Clock Select" in mux selection register
> + * @clk_nb: used for notification
> + * @original_index: set by notifier callback
> + */
> +struct sg2042_mux_clock {
> + unsigned int id;
> + const char *name;
> + const char * const *parent_names;
Please use struct clk_parent_data or clk_hw directly to specify parents.
Don't use string names.
> + u8 num_parents;
> + unsigned long flags;
> + unsigned long offset_select;
> + u8 shift;
> + u8 width;
> + struct notifier_block clk_nb;
> + u8 original_index;
> +};
> +
> +#define to_sg2042_mux_nb(_nb) container_of(_nb, struct sg2042_mux_clock, clk_nb)
Powered by blists - more mailing lists