| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240311175926.1625180-3-tanmay.shah@amd.com>
Date: Mon, 11 Mar 2024 10:59:25 -0700
From: Tanmay Shah <tanmay.shah@....com>
To: <andersson@...nel.org>, <mathieu.poirier@...aro.org>,
<robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
<conor+dt@...nel.org>, <michal.simek@....com>, <ben.levinsky@....com>,
<tanmay.shah@....com>
CC: <linux-remoteproc@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
Radhey Shyam Pandey <radhey.shyam.pandey@....com>
Subject: [PATCH v13 2/4] dt-bindings: remoteproc: add Tightly Coupled Memory (TCM) bindings
From: Radhey Shyam Pandey <radhey.shyam.pandey@....com>
Introduce bindings for TCM memory address space on AMD-xilinx Zynq
UltraScale+ platform. It will help in defining TCM in device-tree
and make it's access platform agnostic and data-driven.
Tightly-coupled memories(TCMs) are low-latency memory that provides
predictable instruction execution and predictable data load/store
timing. Each Cortex-R5F processor contains two 64-bit wide 64 KB memory
banks on the ATCM and BTCM ports, for a total of 128 KB of memory.
The TCM resources(reg, reg-names and power-domain) are documented for
each TCM in the R5 node. The reg and reg-names are made as required
properties as we don't want to hardcode TCM addresses for future
platforms and for zu+ legacy implementation will ensure that the
old dts w/o reg/reg-names works and stable ABI is maintained.
It also extends the examples for TCM split and lockstep modes.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@....com>
Signed-off-by: Tanmay Shah <tanmay.shah@....com>
---
Changes in v13:
- Have power-domains property for lockstep case instead of
keeping it flexible.
- Add "items:" list in power-domains property
Changes in v12:
- add "reg", "reg-names" and "power-domains" in pattern properties
- add "reg" and "reg-names" in required list
- keep "power-domains" in required list as it was before the change
.../remoteproc/xlnx,zynqmp-r5fss.yaml | 201 ++++++++++++++++--
1 file changed, 181 insertions(+), 20 deletions(-)
diff --git a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
index 78aac69f1060..629084a84ce6 100644
--- a/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/xlnx,zynqmp-r5fss.yaml
@@ -20,9 +20,21 @@ properties:
compatible:
const: xlnx,zynqmp-r5fss
+ "#address-cells":
+ const: 2
+
+ "#size-cells":
+ const: 2
+
+ ranges:
+ description: |
+ Standard ranges definition providing address translations for
+ local R5F TCM address spaces to bus addresses.
+
xlnx,cluster-mode:
$ref: /schemas/types.yaml#/definitions/uint32
enum: [0, 1, 2]
+ default: 1
description: |
The RPU MPCore can operate in split mode (Dual-processor performance), Safety
lock-step mode(Both RPU cores execute the same code in lock-step,
@@ -37,7 +49,7 @@ properties:
2: single cpu mode
patternProperties:
- "^r5f-[a-f0-9]+$":
+ "^r5f@[0-9a-f]+$":
type: object
description: |
The RPU is located in the Low Power Domain of the Processor Subsystem.
@@ -54,8 +66,17 @@ patternProperties:
compatible:
const: xlnx,zynqmp-r5f
+ reg:
+ minItems: 1
+ maxItems: 4
+
+ reg-names:
+ minItems: 1
+ maxItems: 4
+
power-domains:
- maxItems: 1
+ minItems: 2
+ maxItems: 5
mboxes:
minItems: 1
@@ -101,35 +122,175 @@ patternProperties:
required:
- compatible
+ - reg
+ - reg-names
- power-domains
- unevaluatedProperties: false
-
required:
- compatible
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+
+allOf:
+ - if:
+ properties:
+ xlnx,cluster-mode:
+ enum:
+ - 1
+ then:
+ patternProperties:
+ "^r5f@[0-9a-f]+$":
+ type: object
+
+ properties:
+ reg:
+ minItems: 1
+ items:
+ - description: ATCM internal memory
+ - description: BTCM internal memory
+ - description: extra ATCM memory in lockstep mode
+ - description: extra BTCM memory in lockstep mode
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: atcm0
+ - const: btcm0
+ - const: atcm1
+ - const: btcm1
+
+ power-domains:
+ minItems: 2
+ items:
+ - description: RPU core power domain
+ - description: ATCM power domain
+ - description: BTCM power domain
+ - description: second ATCM power domain
+ - description: second BTCM power domain
+
+ else:
+ patternProperties:
+ "^r5f@[0-9a-f]+$":
+ type: object
+
+ properties:
+ reg:
+ minItems: 1
+ items:
+ - description: ATCM internal memory
+ - description: BTCM internal memory
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: atcm0
+ - const: btcm0
+
+ power-domains:
+ minItems: 2
+ items:
+ - description: RPU core power domain
+ - description: ATCM power domain
+ - description: BTCM power domain
additionalProperties: false
examples:
- |
- remoteproc {
- compatible = "xlnx,zynqmp-r5fss";
- xlnx,cluster-mode = <1>;
-
- r5f-0 {
- compatible = "xlnx,zynqmp-r5f";
- power-domains = <&zynqmp_firmware 0x7>;
- memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>, <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
- mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
- mbox-names = "tx", "rx";
+ #include <dt-bindings/power/xlnx-zynqmp-power.h>
+
+ // Split mode configuration
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ remoteproc@...00000 {
+ compatible = "xlnx,zynqmp-r5fss";
+ xlnx,cluster-mode = <0>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
+ <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
+ <0x1 0x0 0x0 0xffe90000 0x0 0x10000>,
+ <0x1 0x20000 0x0 0xffeb0000 0x0 0x10000>;
+
+ r5f@0 {
+ compatible = "xlnx,zynqmp-r5f";
+ reg = <0x0 0x0 0x0 0x10000>, <0x0 0x20000 0x0 0x10000>;
+ reg-names = "atcm0", "btcm0";
+ power-domains = <&zynqmp_firmware PD_RPU_0>,
+ <&zynqmp_firmware PD_R5_0_ATCM>,
+ <&zynqmp_firmware PD_R5_0_BTCM>;
+ memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>,
+ <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
+ mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
+ mbox-names = "tx", "rx";
+ };
+
+ r5f@1 {
+ compatible = "xlnx,zynqmp-r5f";
+ reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
+ reg-names = "atcm0", "btcm0";
+ power-domains = <&zynqmp_firmware PD_RPU_1>,
+ <&zynqmp_firmware PD_R5_1_ATCM>,
+ <&zynqmp_firmware PD_R5_1_BTCM>;
+ memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>,
+ <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
+ mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
+ mbox-names = "tx", "rx";
+ };
};
+ };
+
+ - |
+ //Lockstep configuration
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ remoteproc@...00000 {
+ compatible = "xlnx,zynqmp-r5fss";
+ xlnx,cluster-mode = <1>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x10000>,
+ <0x0 0x20000 0x0 0xffe20000 0x0 0x10000>,
+ <0x0 0x10000 0x0 0xffe10000 0x0 0x10000>,
+ <0x0 0x30000 0x0 0xffe30000 0x0 0x10000>;
+
+ r5f@0 {
+ compatible = "xlnx,zynqmp-r5f";
+ reg = <0x0 0x0 0x0 0x10000>,
+ <0x0 0x20000 0x0 0x10000>,
+ <0x0 0x10000 0x0 0x10000>,
+ <0x0 0x30000 0x0 0x10000>;
+ reg-names = "atcm0", "btcm0", "atcm1", "btcm1";
+ power-domains = <&zynqmp_firmware PD_RPU_0>,
+ <&zynqmp_firmware PD_R5_0_ATCM>,
+ <&zynqmp_firmware PD_R5_0_BTCM>,
+ <&zynqmp_firmware PD_R5_1_ATCM>,
+ <&zynqmp_firmware PD_R5_1_BTCM>;
+ memory-region = <&rproc_0_fw_image>, <&rpu0vdev0buffer>,
+ <&rpu0vdev0vring0>, <&rpu0vdev0vring1>;
+ mboxes = <&ipi_mailbox_rpu0 0>, <&ipi_mailbox_rpu0 1>;
+ mbox-names = "tx", "rx";
+ };
- r5f-1 {
- compatible = "xlnx,zynqmp-r5f";
- power-domains = <&zynqmp_firmware 0x8>;
- memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>, <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
- mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
- mbox-names = "tx", "rx";
+ r5f@1 {
+ compatible = "xlnx,zynqmp-r5f";
+ reg = <0x1 0x0 0x0 0x10000>, <0x1 0x20000 0x0 0x10000>;
+ reg-names = "atcm0", "btcm0";
+ power-domains = <&zynqmp_firmware PD_RPU_1>,
+ <&zynqmp_firmware PD_R5_1_ATCM>,
+ <&zynqmp_firmware PD_R5_1_BTCM>;
+ memory-region = <&rproc_1_fw_image>, <&rpu1vdev0buffer>,
+ <&rpu1vdev0vring0>, <&rpu1vdev0vring1>;
+ mboxes = <&ipi_mailbox_rpu1 0>, <&ipi_mailbox_rpu1 1>;
+ mbox-names = "tx", "rx";
+ };
};
};
...
--
2.25.1
Powered by blists - more mailing lists