[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240312-xilinx-dp-audio-v1-3-696c79facbb9@ideasonboard.com>
Date: Tue, 12 Mar 2024 11:41:04 +0200
From: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
To: Lars-Peter Clausen <lars@...afoo.de>, Jaroslav Kysela <perex@...ex.cz>,
Takashi Iwai <tiwai@...e.com>, Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>, Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>, Michal Simek <michal.simek@....com>
Cc: linux-sound@...r.kernel.org, linux-kernel@...r.kernel.org,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, Vishal Sagar <vishal.sagar@....com>,
Anatoliy Klymenko <anatoliy.klymenko@....com>,
Péter Ujfalusi <peter.ujfalusi@...il.com>,
Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
Subject: [PATCH 3/4] arm64: dts: zynqmp: Add DMA for DP audio
Add the two DMA channels used for the DisplayPort audio to the
zynqmp_dpsub node.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@...asonboard.com>
---
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index eaba466804bc..811d80cbf4c5 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -1036,11 +1036,14 @@ zynqmp_dpsub: display@...a0000 {
"dp_vtc_pixel_clk_in";
power-domains = <&zynqmp_firmware PD_DP>;
resets = <&zynqmp_reset ZYNQMP_RESET_DP>;
- dma-names = "vid0", "vid1", "vid2", "gfx0";
+ dma-names = "vid0", "vid1", "vid2", "gfx0",
+ "aud0", "aud1";
dmas = <&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO0>,
<&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO1>,
<&zynqmp_dpdma ZYNQMP_DPDMA_VIDEO2>,
- <&zynqmp_dpdma ZYNQMP_DPDMA_GRAPHICS>;
+ <&zynqmp_dpdma ZYNQMP_DPDMA_GRAPHICS>,
+ <&zynqmp_dpdma ZYNQMP_DPDMA_AUDIO0>,
+ <&zynqmp_dpdma ZYNQMP_DPDMA_AUDIO1>;
ports {
#address-cells = <1>;
--
2.34.1
Powered by blists - more mailing lists