linux-kernel - Re: [PATCH 3/3] dts: arm64: sunxi: add initial dts for T95 AXP313 tv box

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <204e2fc3-19f5-45c9-b313-fdc81f38ec70@kernel.org>
Date: Tue, 12 Mar 2024 12:27:08 +0100
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Kamil Kasperski <ressetkk@...il.com>, wens@...e.org,
 jernej.skrabec@...il.com, samuel@...lland.org
Cc: linux-arm-kernel@...ts.infradead.org, linux-sunxi@...ts.linux.dev,
 linux-kernel@...r.kernel.org
Subject: Re: [PATCH 3/3] dts: arm64: sunxi: add initial dts for T95 AXP313 tv
 box

On 11/03/2024 18:47, Kamil Kasperski wrote:
> T95 is a most commonly known for being a box with a pre-installed malware.
> It uses Allwinner H616 and comes with eMMC and DDR3 memory.
> 
> Those TV boxes usually come with common hardware:
> - Allwinner H616 SoC
> - 2/4 GB DDR3 SDRAM (Hynix H5TQ2G43BFR)
> - 16/32/64 GB eMMC
> - microSD slot
> - AXP305 or AXP313 PMIC depending on board revision
> - 3.5mm A/V output
> - HDMI port
> - 2x USB 2.0 ports
> - 100M ETH using Internal PHY
> - 7-segment display
> - DC 5V barrel jack port
> 
> The board contains holes hor UART header wired to &uart0.
> From the DRAM specification its operation voltage is 1.5V.
> 
> Signed-off-by: Kamil Kasperski <ressetkk@...il.com>

Please use subject prefixes matching the subsystem. You can get them for
example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
your patch is touching.

> ---
>  arch/arm64/boot/dts/allwinner/Makefile        |   1 +
>  .../dts/allwinner/sun50i-h616-t95-axp313.dts  | 138 ++++++++++++++++++
>  2 files changed, 139 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-t95-axp313.dts
> 
> diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
> index 21149b346a60..183dcdea40ad 100644
> --- a/arch/arm64/boot/dts/allwinner/Makefile
> +++ b/arch/arm64/boot/dts/allwinner/Makefile
> @@ -43,6 +43,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-pi.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
>  dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb
> +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-t95-axp313.dtb

't' goes before 'x'.

Keep the order.

Best regards,
Krzysztof