lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240313-archer-ax55-v1-v3-2-cd9402efab59@gmail.com>
Date: Wed, 13 Mar 2024 19:25:40 +0100
From: Gabor Juhos <j4g8y7@...il.com>
To: Bjorn Andersson <andersson@...nel.org>, 
 Konrad Dybcio <konrad.dybcio@...aro.org>, Rob Herring <robh+dt@...nel.org>, 
 Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, 
 Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org, 
 linux-kernel@...r.kernel.org, Gabor Juhos <j4g8y7@...il.com>
Subject: [PATCH v3 2/2] arm64: dts: qcom: add TP-Link Archer AX55 v1

Add device tree source for the TP-Link Archer AX55 v1 [1]
which is a dual-band WiFi router based on the IPQ5018 SoC.

At the moment, only the UART, the GPIO LEDs and buttons
are usable, but it makes it possible to boot an initramfs
image on the device.

The device tree can be extended in the future, once support
for other periherals will be available for the platform.

1. https://www.tp-link.com/en/home-networking/wifi-router/archer-ax55/v1/

Signed-off-by: Gabor Juhos <j4g8y7@...il.com>
---
Changes in v3:
  - change pin configuration to use "gpio20" and "gpio21" for UART pins
  - rebase on top of v6.8.
  - Link to v2: https://lore.kernel.org/r/20240226-archer-ax55-v1-v2-2-3776eb61f432@gmail.com

Changes in v2:
  - reorder the properties in TLMM pin configuration nodes to follow the
    usual order pointed out by Krzysztof
  - Link to v1: https://lore.kernel.org/all/20240223-archer-ax55-v1-v1-2-99f8fa2c3858@gmail.com

Note: running 'make CHECK_DTBS=y qcom/ipq5018-tplink-archer-ax55-v1.dtb'
shows the following:

    DTC_CHK arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb
  <...>/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb: usb@...8800: interrupts: [[0, 62, 4]] is too short
  	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
  <...>/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb: usb@...8800: interrupt-names: ['hs_phy_irq'] is too short
  	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
  <...>/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb: usb@...8800: interrupts: [[0, 62, 4]] is too short
  	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
  <...>/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb: usb@...8800: interrupt-names:0: 'pwr_event' was expected
  	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
  <...>/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dtb: usb@...8800: interrupt-names: ['hs_phy_irq'] is too short
  	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#

This is not caused by the new device tree per se but comes from
the usb@...8800 node defined in ipq5018.dtsi. Running the check
on 'qcom/ipq5018-rdp432-c2.dtb' shows the same.
---
 arch/arm64/boot/dts/qcom/Makefile                  |   1 +
 .../dts/qcom/ipq5018-tplink-archer-ax55-v1.dts     | 132 +++++++++++++++++++++
 2 files changed, 133 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 39889d5f8e123..d3ba1e22d6ddd 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= apq8094-sony-xperia-kitakami-karin_windy.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-rdp432-c2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-tplink-archer-ax55-v1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp441.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp442.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp468.dtb
diff --git a/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dts b/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dts
new file mode 100644
index 0000000000000..15fcb5693545d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+#include "ipq5018.dtsi"
+
+/ {
+	model = "TP-Link Archer AX55 v1";
+	compatible = "tplink,archer-ax55-v1", "qcom,ipq5018";
+
+	aliases {
+		serial0 = &blsp1_uart1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&led_pins>;
+		pinctrl-names = "default";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&tlmm 10 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			/* WLAN 2.4GHz */
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			function-enumerator = <0>;
+			gpios = <&tlmm 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-3 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-4 {
+			color = <LED_COLOR_ID_ORANGE>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&tlmm 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-5 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_USB;
+			gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-6 {
+			/* WLAN 5GHz */
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			function-enumerator = <1>;
+			gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	buttons {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&button_pins>;
+		pinctrl-names = "default";
+
+		button-reset {
+			debounce-interval = <60>;
+			gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+		};
+
+		button-wps {
+			debounce-interval = <60>;
+			gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&uart_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32000>;
+};
+
+&tlmm {
+	button_pins: button-pins-state {
+		pins = "gpio25", "gpio31";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-up;
+	};
+
+	led_pins: led-pins-state {
+		pins = "gpio10", "gpio11", "gpio13", "gpio18", "gpio22",
+		       "gpio38", "gpio39";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	uart_pins: uart-pins-state {
+		pins = "gpio20", "gpio21";
+		function = "blsp0_uart0";
+		drive-strength = <8>;
+		bias-disable;
+	};
+};
+
+&xo_board_clk {
+	clock-frequency = <24000000>;
+};

-- 
2.44.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ