| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240313052027.1320489-1-billy_tsai@aspeedtech.com>
Date: Wed, 13 Mar 2024 13:20:27 +0800
From: Billy Tsai <billy_tsai@...eedtech.com>
To: <andrew@...econstruct.com.au>, <linus.walleij@...aro.org>,
<joel@....id.au>, <johnny_huang@...eedtech.com>,
<linux-aspeed@...ts.ozlabs.org>, <openbmc@...ts.ozlabs.org>,
<linux-gpio@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <BMC-SW@...eedtech.com>,
<Ricky_CX_Wu@...ynn.com>
Subject: [PATCH] pinctrl: pinctrl-aspeed-g6: Fix register offset.
The register offset to disable the internal pull-down of GPIOR~T is 0x630
instead of 0x620.
Fixes: 15711ba6ff19 ("pinctrl: aspeed-g6: Add AST2600 pinconf support")
Signed-off-by: Billy Tsai <billy_tsai@...eedtech.com>
---
drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 34 +++++++++++-----------
1 file changed, 17 insertions(+), 17 deletions(-)
diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
index d376fa7114d1..029efe16f8cc 100644
--- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
+++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
@@ -43,7 +43,7 @@
#define SCU614 0x614 /* Disable GPIO Internal Pull-Down #1 */
#define SCU618 0x618 /* Disable GPIO Internal Pull-Down #2 */
#define SCU61C 0x61c /* Disable GPIO Internal Pull-Down #3 */
-#define SCU620 0x620 /* Disable GPIO Internal Pull-Down #4 */
+#define SCU630 0x630 /* Disable GPIO Internal Pull-Down #4 */
#define SCU634 0x634 /* Disable GPIO Internal Pull-Down #5 */
#define SCU638 0x638 /* Disable GPIO Internal Pull-Down #6 */
#define SCU690 0x690 /* Multi-function Pin Control #24 */
@@ -2495,38 +2495,38 @@ static struct aspeed_pin_config aspeed_g6_configs[] = {
ASPEED_PULL_DOWN_PINCONF(D14, SCU61C, 0),
/* GPIOS7 */
- ASPEED_PULL_DOWN_PINCONF(T24, SCU620, 23),
+ ASPEED_PULL_DOWN_PINCONF(T24, SCU630, 23),
/* GPIOS6 */
- ASPEED_PULL_DOWN_PINCONF(P23, SCU620, 22),
+ ASPEED_PULL_DOWN_PINCONF(P23, SCU630, 22),
/* GPIOS5 */
- ASPEED_PULL_DOWN_PINCONF(P24, SCU620, 21),
+ ASPEED_PULL_DOWN_PINCONF(P24, SCU630, 21),
/* GPIOS4 */
- ASPEED_PULL_DOWN_PINCONF(R26, SCU620, 20),
+ ASPEED_PULL_DOWN_PINCONF(R26, SCU630, 20),
/* GPIOS3*/
- ASPEED_PULL_DOWN_PINCONF(R24, SCU620, 19),
+ ASPEED_PULL_DOWN_PINCONF(R24, SCU630, 19),
/* GPIOS2 */
- ASPEED_PULL_DOWN_PINCONF(T26, SCU620, 18),
+ ASPEED_PULL_DOWN_PINCONF(T26, SCU630, 18),
/* GPIOS1 */
- ASPEED_PULL_DOWN_PINCONF(T25, SCU620, 17),
+ ASPEED_PULL_DOWN_PINCONF(T25, SCU630, 17),
/* GPIOS0 */
- ASPEED_PULL_DOWN_PINCONF(R23, SCU620, 16),
+ ASPEED_PULL_DOWN_PINCONF(R23, SCU630, 16),
/* GPIOR7 */
- ASPEED_PULL_DOWN_PINCONF(U26, SCU620, 15),
+ ASPEED_PULL_DOWN_PINCONF(U26, SCU630, 15),
/* GPIOR6 */
- ASPEED_PULL_DOWN_PINCONF(W26, SCU620, 14),
+ ASPEED_PULL_DOWN_PINCONF(W26, SCU630, 14),
/* GPIOR5 */
- ASPEED_PULL_DOWN_PINCONF(T23, SCU620, 13),
+ ASPEED_PULL_DOWN_PINCONF(T23, SCU630, 13),
/* GPIOR4 */
- ASPEED_PULL_DOWN_PINCONF(U25, SCU620, 12),
+ ASPEED_PULL_DOWN_PINCONF(U25, SCU630, 12),
/* GPIOR3*/
- ASPEED_PULL_DOWN_PINCONF(V26, SCU620, 11),
+ ASPEED_PULL_DOWN_PINCONF(V26, SCU630, 11),
/* GPIOR2 */
- ASPEED_PULL_DOWN_PINCONF(V24, SCU620, 10),
+ ASPEED_PULL_DOWN_PINCONF(V24, SCU630, 10),
/* GPIOR1 */
- ASPEED_PULL_DOWN_PINCONF(U24, SCU620, 9),
+ ASPEED_PULL_DOWN_PINCONF(U24, SCU630, 9),
/* GPIOR0 */
- ASPEED_PULL_DOWN_PINCONF(V25, SCU620, 8),
+ ASPEED_PULL_DOWN_PINCONF(V25, SCU630, 8),
/* GPIOX7 */
ASPEED_PULL_DOWN_PINCONF(AB10, SCU634, 31),
--
2.25.1
Powered by blists - more mailing lists