Message-ID: <CAAd53p71sS+eV1OmPgSDrAcqu8-FJZX-9sd=3a6ZNAvaZV9jbQ@mail.gmail.com>
Date: Wed, 13 Mar 2024 14:24:37 +0800
From: Kai-Heng Feng <kai.heng.feng@...onical.com>
To: minyard@....org
Cc: Guenter Roeck <linux@...ck-us.net>, jdelvare@...e.com, linux-hwmon@...r.kernel.org, 
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 2/2] hwmon: (acpi_power_meter) Ensure IPMI space
 handler is ready on Dell systems

Hi Corey,

On Wed, Jan 10, 2024 at 7:52 AM Corey Minyard <minyard@....org> wrote:
>
> On Tue, Jan 09, 2024 at 02:32:41PM -0800, Guenter Roeck wrote:
> > On 1/9/24 13:28, Corey Minyard wrote:
> > > On Tue, Jan 09, 2024 at 07:23:40AM -0800, Guenter Roeck wrote:
> > > > On 1/8/24 20:12, Kai-Heng Feng wrote:
> > > > > The following error can be observed at boot:
> > > > > [    3.717920] ACPI Error: No handler for Region [SYSI] (00000000ab9e62c5) [IPMI] (20230628/evregion-130)
> > > > > [    3.717928] ACPI Error: Region IPMI (ID=7) has no handler (20230628/exfldio-261)
> > > > >
> > > > > [    3.717936] No Local Variables are initialized for Method [_GHL]
> > > > >
> > > > > [    3.717938] No Arguments are initialized for method [_GHL]
> > > > >
> > > > > [    3.717940] ACPI Error: Aborting method \_SB.PMI0._GHL due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
> > > > > [    3.717949] ACPI Error: Aborting method \_SB.PMI0._PMC due to previous error (AE_NOT_EXIST) (20230628/psparse-529)
> > > > > [    3.717957] ACPI: \_SB_.PMI0: _PMC evaluation failed: AE_NOT_EXIST
> > > > >
> > > > > On Dell systems several methods of acpi_power_meter access variables in
> > > > > IPMI region [0], so wait until IPMI space handler is installed by
> > > > > acpi_ipmi and also wait until SMI is selected to make the space handler
> > > > > fully functional.
> > > > >
> > > > > [0] https://www.dell.com/support/manuals/en-us/redhat-enterprise-linux-v8.0/rhel8_rn_pub/advanced-configuration-and-power-interface-acpi-error-messages-displayed-in-dmesg?guid=guid-0d5ae482-1977-42cf-b417-3ed5c3f5ee62
> > > > >
> > > > > Signed-off-by: Kai-Heng Feng <kai.heng.feng@...onical.com>
> > > > > ---
> > > > > v4:
> > > > >    - No change.
> > > > >
> > > > > v3:
> > > > >    - Use helper.
> > > > >    - Use return value to print warning message.
> > > > >
> > > > > v2:
> > > > >    - Use completion instead of request_module().
> > > > >
> > > > >    drivers/hwmon/acpi_power_meter.c | 6 ++++++
> > > > >    1 file changed, 6 insertions(+)
> > > > >
> > > > > diff --git a/drivers/hwmon/acpi_power_meter.c b/drivers/hwmon/acpi_power_meter.c
> > > > > index 703666b95bf4..33fb9626633d 100644
> > > > > --- a/drivers/hwmon/acpi_power_meter.c
> > > > > +++ b/drivers/hwmon/acpi_power_meter.c
> > > > > @@ -883,6 +883,12 @@ static int acpi_power_meter_add(struct acpi_device *device)
> > > > >         strcpy(acpi_device_class(device), ACPI_POWER_METER_CLASS);
> > > > >         device->driver_data = resource;
> > > > > +       if (dmi_match(DMI_SYS_VENDOR, "Dell Inc.") &&
> > > > > +           acpi_dev_get_first_match_dev("IPI0001", NULL, -1)) {
> > > > > +               if (acpi_wait_for_acpi_ipmi())
> > > > > +                       dev_warn(&device->dev, "Waiting for ACPI IPMI timeout");
> > > > > +       }
> > > > > +
> > > >
> > > > What a hack :-(.
> > > >
> > > > This needs a comment in the driver explaining the rationale for this change, and
> > > > also a comment explaining why, for example, using late_initcall() does not help.
> > > >
> > > > If CONFIG_IPMI_SI=n, acpi_wait_for_acpi_ipmi() will return 0, indicating success.
> > > > I can only imagine that this will result in a failure since the whole point
> > > > of this code is to wait until that driver is loaded. Please explain how and why
> > > > the code works with CONFIG_IPMI_SI=n. Similar, if the function returns an error,
> > > > I can not imagine how it would make sense to instantiate the driver If it does
> > > > make sense to continue in this situation, a comment is needed in the code
> > > > describing the rationale.
> > >
> > > I'm trying to figure out where CONFIG_IPMI_SI comes in here.  It's
> > > nowhere in these patches or in drivers/acpi.  ACPI_IPMI depends on
> > > IPMI_HANDLER, but that's all I found.  However, ACPI_IPMI can be "m" as
> > > you mention and SENSOR_ACPI_POWER is only under the ACPI config, which
> > > is a problem.
> > >
> >
> > The patch above is looking for IPI0001, which is instantiated in
> >
> > drivers/char/ipmi/ipmi_si_platform.c:   { "IPI0001", 0 },
> > drivers/char/ipmi/ipmi_ssif.c:  { "IPI0001", 0 },
> >
> > Are you saying that the above code doesn't depend on it ? In that case,
> > why does it need to check for the IPI0001 device in the first place ?
> >
> > That will need another comment/explanation in the code because people
> > (or maybe dummies) like me won't understand the non-dependency (i.e.,
> > the need to look for IPI0001 but not requiring the associated code).
> >
> > More specifically, unless I really don't understand the acpi code,
> > acpi_dev_get_first_match_dev() will return NULL if there is no matching
> > device. In that case, the above code won't call acpi_wait_for_acpi_ipmi().
> > Fine, but why would this driver have to wait for ipmi if and only if there
> > is a device (and thus a driver) for IPI0001 ?
>
> Honestly, I don't really understand the acpi code that well, either.
> What I think it's saying is that if IPI0001 is present in the ACPI
> tables (there is an acpi_device present), then wait for the driver to
> get loaded.  It could be IPMI_SI or IPMI_SSIF, but there's no direct
> connection between this code and the low-level IPMI driver.  I don't
> think it forces the driver to load, at least not from what I can tell.

The dependency isn't discoverable at software level. It's all in the BIOS' ASL

>
> And another bug.  From the description of acpi_dev_get_first_match_dev():
> The caller is responsible for invoking acpi_dev_put() on the returned device.

Sure. I'll fix it in next revision.

>
> As you said, this is a big hack.  There must be a better way.

Unfortunately I really can't find a better alternative if the
dependency isn't declared anywhere.

Kai-Heng

>
> -corey
>
> >
> > Thanks,
> > Guenter
> >
> > > I do think there are other issues with this patch, though.  The IPMI
> > > handler code decouples the user from the driver from a dependency point
> > > of view.  It seems to be fairly common to see IPMI_HANDLER and
> > > ACPI_IPMI as "y" and IPMI_SI (and IPMI_SSIF, and others) as "m".  That
> > > means this code will run but will wait for the IPMI device to appear,
> > > which may not be until the module gets loaded, which may be far more
> > > than 2 seconds later.
> > >
> > > I'm not quite sure how to fix this.  Really, the add call for this
> > > driver shouldn't be called until the IPMI device is present.  Doesn't
> > > ACPI have mechanisms to handle this sort of thing?  If so, the hack may
> > > need to be in the handling of that ACPI data (this field is not there
> > > but should be), not here, which as Guenter says, is a big hack.
> > >
> > > -corey
> > >
> > > >
> > > > Third, the new symbol is declared with CONFIG_ACPI, but defined with
> > > > CONFIG_IPMI_SI. I can not imagine how this would compile with CONFIG_ACPI=y
> > > > and CONFIG_IPMI_SI={m,n} and/or CONFIG_ACPI_IPMI={m,n}.
> > > >
> > > > On top of that, IPMI_SI and ACPI_IPMI are is tristate, as is SENSORS_ACPI_POWER.
> > > > This means that SENSORS_ACPI_POWER=y combined with CONFIG_IPMI_SI={m,n} or
> > > > CONFIG_ACPI_IPMI={m,n} will result in a compile failure.
> > > >
> > > > Please make sure that this code compiles with all possible symbol combinations.
> > > >
> > > > Thanks,
> > > > Guenter
> > > >
> > > > >         res = read_capabilities(resource);
> > > > >         if (res)
> > > > >                 goto exit_free;
> > > >
> > > >
> > >
> >
> >

Powered by blists - more mailing lists