| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20240314072129.1520475-3-c-vankar@ti.com>
Date: Thu, 14 Mar 2024 12:51:26 +0530
From: Chintan Vankar <c-vankar@...com>
To: Conor Dooley <conor+dt@...nel.org>,
Krzysztof Kozlowski
<krzysztof.kozlowski+dt@...aro.org>,
Rob Herring <robh@...nel.org>, Tero
Kristo <kristo@...nel.org>,
Vignesh Raghavendra <vigneshr@...com>, Nishanth
Menon <nm@...com>
CC: <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <s-vadapalli@...com>,
<srk@...com>, <r-gunasekaran@...com>, <danishanwar@...com>,
Chintan Vankar
<c-vankar@...com>
Subject: [PATCH v5 2/5] arm64: dts: ti: k3-j784s4-main: Add CPSW2G and CPSW9G nodes
From: Siddharth Vadapalli <s-vadapalli@...com>
J784S4 SoC has MAIN CPSW2G and CPSW9G instances of the CPSW
Ethernet Switch. CPSW2G has 1 external port and 1 host port
while CPSW9G has 8 external ports and 1 host port.
Add device-tree nodes for MAIN CPSW2G and CPSW9G and disable
them by default. MAIN CPSW2G will be enabled in the board file
while device-tree overlays will be used to enable CPSW9G.
Signed-off-by: Siddharth Vadapalli <s-vadapalli@...com>
Signed-off-by: Chintan Vankar <c-vankar@...com>
---
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 187 +++++++++++++++++++++
1 file changed, 187 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index b67c37460a73..ddf28b2143aa 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -48,6 +48,19 @@ scm_conf: bus@...000 {
#size-cells = <1>;
ranges = <0x00 0x00 0x00100000 0x1c000>;
+ cpsw1_phy_gmii_sel: phy@...4 {
+ compatible = "ti,am654-phy-gmii-sel";
+ reg = <0x4034 0x4>;
+ #phy-cells = <1>;
+ };
+
+ cpsw0_phy_gmii_sel: phy@...4 {
+ compatible = "ti,j784s4-cpsw9g-phy-gmii-sel";
+ ti,qsgmii-main-ports = <7>, <7>;
+ reg = <0x4044 0x20>;
+ #phy-cells = <1>;
+ };
+
serdes_ln_ctrl: mux-controller@...0 {
compatible = "reg-mux";
reg = <0x00004080 0x30>;
@@ -1439,6 +1452,180 @@ cpts@...d0000 {
};
};
+ main_cpsw0: ethernet@...0000 {
+ compatible = "ti,j784s4-cpswxg-nuss";
+ reg = <0x00 0xc000000 0x00 0x200000>;
+ reg-names = "cpsw_nuss";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x00 0x00 0x00 0xc000000 0x00 0x200000>;
+ dma-coherent;
+ clocks = <&k3_clks 64 0>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 64 TI_SCI_PD_EXCLUSIVE>;
+
+ dmas = <&main_udmap 0xca00>,
+ <&main_udmap 0xca01>,
+ <&main_udmap 0xca02>,
+ <&main_udmap 0xca03>,
+ <&main_udmap 0xca04>,
+ <&main_udmap 0xca05>,
+ <&main_udmap 0xca06>,
+ <&main_udmap 0xca07>,
+ <&main_udmap 0x4a00>;
+ dma-names = "tx0", "tx1", "tx2", "tx3",
+ "tx4", "tx5", "tx6", "tx7",
+ "rx";
+
+ status = "disabled";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ main_cpsw0_port1: port@1 {
+ reg = <1>;
+ label = "port1";
+ ti,mac-only;
+ status = "disabled";
+ };
+
+ main_cpsw0_port2: port@2 {
+ reg = <2>;
+ label = "port2";
+ ti,mac-only;
+ status = "disabled";
+ };
+
+ main_cpsw0_port3: port@3 {
+ reg = <3>;
+ label = "port3";
+ ti,mac-only;
+ status = "disabled";
+ };
+
+ main_cpsw0_port4: port@4 {
+ reg = <4>;
+ label = "port4";
+ ti,mac-only;
+ status = "disabled";
+ };
+
+ main_cpsw0_port5: port@5 {
+ reg = <5>;
+ label = "port5";
+ ti,mac-only;
+ status = "disabled";
+ };
+
+ main_cpsw0_port6: port@6 {
+ reg = <6>;
+ label = "port6";
+ ti,mac-only;
+ status = "disabled";
+ };
+
+ main_cpsw0_port7: port@7 {
+ reg = <7>;
+ label = "port7";
+ ti,mac-only;
+ status = "disabled";
+ };
+
+ main_cpsw0_port8: port@8 {
+ reg = <8>;
+ label = "port8";
+ ti,mac-only;
+ status = "disabled";
+ };
+ };
+
+ main_cpsw0_mdio: mdio@f00 {
+ compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+ reg = <0x00 0xf00 0x00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&k3_clks 64 0>;
+ clock-names = "fck";
+ bus_freq = <1000000>;
+ status = "disabled";
+ };
+
+ cpts@...00 {
+ compatible = "ti,am65-cpts";
+ reg = <0x00 0x3d000 0x00 0x400>;
+ clocks = <&k3_clks 64 3>;
+ clock-names = "cpts";
+ interrupts-extended = <&gic500 GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cpts";
+ ti,cpts-ext-ts-inputs = <4>;
+ ti,cpts-periodic-outputs = <2>;
+ };
+ };
+
+ main_cpsw1: ethernet@...0000 {
+ compatible = "ti,j721e-cpsw-nuss";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0x00 0xc200000 0x00 0x200000>;
+ reg-names = "cpsw_nuss";
+ ranges = <0x00 0x00 0x00 0xc200000 0x00 0x200000>;
+ dma-coherent;
+ clocks = <&k3_clks 62 0>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 62 TI_SCI_PD_EXCLUSIVE>;
+
+ dmas = <&main_udmap 0xc640>,
+ <&main_udmap 0xc641>,
+ <&main_udmap 0xc642>,
+ <&main_udmap 0xc643>,
+ <&main_udmap 0xc644>,
+ <&main_udmap 0xc645>,
+ <&main_udmap 0xc646>,
+ <&main_udmap 0xc647>,
+ <&main_udmap 0x4640>;
+ dma-names = "tx0", "tx1", "tx2", "tx3",
+ "tx4", "tx5", "tx6", "tx7",
+ "rx";
+
+ status = "disabled";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ main_cpsw1_port1: port@1 {
+ reg = <1>;
+ label = "port1";
+ phys = <&cpsw1_phy_gmii_sel 1>;
+ ti,mac-only;
+ status = "disabled";
+ };
+ };
+
+ main_cpsw1_mdio: mdio@f00 {
+ compatible = "ti,cpsw-mdio", "ti,davinci_mdio";
+ reg = <0x00 0xf00 0x00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&k3_clks 62 0>;
+ clock-names = "fck";
+ bus_freq = <1000000>;
+ status = "disabled";
+ };
+
+ cpts@...00 {
+ compatible = "ti,am65-cpts";
+ reg = <0x00 0x3d000 0x00 0x400>;
+ clocks = <&k3_clks 62 3>;
+ clock-names = "cpts";
+ interrupts-extended = <&gic500 GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cpts";
+ ti,cpts-ext-ts-inputs = <4>;
+ ti,cpts-periodic-outputs = <2>;
+ };
+ };
+
main_mcan0: can@...1000 {
compatible = "bosch,m_can";
reg = <0x00 0x02701000 0x00 0x200>,
--
2.34.1
Powered by blists - more mailing lists