[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20240314100131.323540-1-qiujingbao.dlmu@gmail.com>
Date: Thu, 14 Mar 2024 18:01:29 +0800
From: Jingbao Qiu <qiujingbao.dlmu@...il.com>
To: u.kleine-koenig@...gutronix.de,
robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org,
conor+dt@...nel.org,
paul.walmsley@...ive.com,
palmer@...belt.com,
aou@...s.berkeley.edu
Cc: linux-pwm@...r.kernel.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-riscv@...ts.infradead.org,
dlan@...too.org,
inochiama@...look.com,
Jingbao Qiu <qiujingbao.dlmu@...il.com>
Subject: [PATCH v5 0/2] riscv: pwm: sophgo: add pwm support for CV1800
The Sophgo CV1800 chip provides a set of four independent
PWM channel outputs.
This series adds PWM controller support for Sophgo cv1800.
Changes since v4:
- drop filename
- fix macro
- optimize cv1800_pwm_set_polarity()
- optimize cv1800_pwm_set_oe()
- add comment for cv1800_pwm_set_oe()
- use ticks replace tem
- fix duty_cycle larger than period_val
- use devm_clk_rate_exclusive_get() replace
clk_rate_exclusive_get()
- map linux polarity to register polarity
v4: https://lore.kernel.org/all/20240304085933.1246964-1-qiujingbao.dlmu@gmail.com/
datasheet Link: https://github.com/milkv-duo/duo-files/blob/main/duo/datasheet/CV1800B-CV1801B-Preliminary-Datasheet-full-en.pdf
page 614
Changes since v3:
- use macro instead of npwm number
- add support for polarity feature
- add support for Output-Enable/OE feature
v3: https://lore.kernel.org/all/20240223082014.109385-1-qiujingbao.dlmu@gmail.com/
Changes since v2:
- use 0x08 instead of macro
- split if statements based on conditions
- in order to round up, first calculate the
number of high-level cycles, then subtract
it from the PERIOD to obtain the number of HLPERIOD
- use new pwmchip_alloc() API instead of old style
v2: https://lore.kernel.org/all/20240212121729.1086718-1-qiujingbao.dlmu@gmail.com/
Changes since v1:
- drop full stop from subject
- re-order maintainers and description
- pass checkpatch.pl --strict
- fix naming errors
- add "Limitations" section
- use a driver specific prefix for all defines
- using bool instead u32 in cv1800_pwm_enable
- check and set state->polarity
- use mul_u64_u64_div_u64
- use clk_rate_exclusive_get(), balance with clk_rate_exclusive_put()
- using macro definitions instead of shift operations
- remove shift operation on 0
- use priv replace cv_pwm
- hardcode npwm
- set atomic to true
- remove MODULE_ALIAS
v1: https://lore.kernel.org/all/20240207055856.672184-1-qiujingbao.dlmu@gmail.com/
Jingbao Qiu (2):
dt-bindings: pwm: sophgo: add pwm for Sophgo CV1800 series SoC
pwm: sophgo: add pwm support for Sophgo CV1800 SoC
.../bindings/pwm/sophgo,cv1800-pwm.yaml | 45 +++
drivers/pwm/Kconfig | 10 +
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-cv1800.c | 315 ++++++++++++++++++
4 files changed, 371 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pwm/sophgo,cv1800-pwm.yaml
create mode 100644 drivers/pwm/pwm-cv1800.c
base-commit: 8ffc8b1bbd505e27e2c8439d326b6059c906c9dd
--
2.25.1
Powered by blists - more mailing lists