[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <54b820ca-3674-4376-8386-464afcf8c50f@linaro.org>
Date: Thu, 14 Mar 2024 12:20:51 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Sumit Garg <sumit.garg@...aro.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
andersson@...nel.org, konrad.dybcio@...aro.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, conor+dt@...nel.org, stephan@...hold.net,
caleb.connolly@...aro.org, neil.armstrong@...aro.org,
laetitia.mariottini@...com, pascal.eberhard@...com, abdou.saker@...com,
jimmy.lalande@...com, benjamin.missey@....se.com,
daniel.thompson@...aro.org, linux-kernel@...r.kernel.org,
Jagdish Gediya <jagdish.gediya@...aro.org>
Subject: Re: [PATCH v2 3/3] arm64: dts: qcom: apq8016: Add Schneider HMIBSC
board DTS
On 14/03/2024 11:26, Sumit Garg wrote:
> On Thu, 14 Mar 2024 at 15:36, Krzysztof Kozlowski
> <krzysztof.kozlowski@...aro.org> wrote:
>>
>> On 14/03/2024 10:36, Sumit Garg wrote:
>>>>
>>>> But it then broke dtbs_check.
>>>
>>> See following breakage afterwards:
>>>
>>> $ make qcom/apq8016-schneider-hmibsc.dtb dtbs_check
>>> <snip>
>>> /home/sumit/build/upstream/linux/arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dtb:
>>> leds: led@5: Unevaluated properties are not allowed ('reg' was
>>> unexpected)
>>> from schema $id: http://devicetree.org/schemas/leds/leds-gpio.yaml#
>>> /home/sumit/build/upstream/linux/arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dtb:
>>> leds: led@6: Unevaluated properties are not allowed ('reg' was
>>> unexpected)
>>> from schema $id: http://devicetree.org/schemas/leds/leds-gpio.yaml#
>>> /home/sumit/build/upstream/linux/arch/arm64/boot/dts/qcom/apq8016-schneider-hmibsc.dtb:
>>> leds: '#address-cells', '#size-cells' do not match any of the regexes:
>>> '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
>>
>> That's obvious, I don't get what is the question. Adding not correct
>> properties is not a solution and dtbs_check correctly tells you that.
>>
>> If you only opened absolutely any existing upstream source, you would
>> see how the gpio leds are represented in DTS.
>>
>
> It looks like my reference example:
> arch/arm64/boot/dts/qcom/apq8016-sbc.dts wasn't correct then. I will
> drop unit addresses then.
Oops, unlucky for you, that is one of old DTS which was not yet fixed. I
am surprised that I missed it, I'll fix it now.
Best regards,
Krzysztof
Powered by blists - more mailing lists